Dual MXCP134S Marine Digital Media Receiver User Guide

Dual MXCP134S Marine Digital Media Receiver

Specifications

• Model: Marine Digital Media Receiver
• Manufacturer: Dual
• Power Supply: 12V DC
• Compatibility: Suitable for marine use

Product Usage Instructions

Installation:

1. Before starting, ensure you have the necessary installation kit, wiring harness, and antenna adapter (sold separately).
2. Remove the existing head unit carefully.
3. Connect the wiring harness. If unsure, seek assistance from a qualified technician.
4. Mount the head unit using the provided mounting sleeve or ISO brackets based on your boat’s dashboard.
5. Connect the wiring harness and antenna, then test the head unit for correct operation.
6. Secure the head unit by snapping the trim ring into place.

Wiring Connections:

The chart below illustrates the connection for each wire in the wiring harness:

Mounting the Head Unit:

Typical DIN Mounting:

1. Insert the mounting sleeve into the dashboard or installation kit.

ISO Mounting:

• Mount the brackets to the sides of the head unit using the supplied screws.

General Operation:

• Power On/Off: Press the power button to turn the unit on/off.
• Changing Modes: Use the SOURCE button to switch between Radio, USB, Bluetooth, AUX modes.

FAQs

• Q: How do I reset the unit back to factory settings?
  • A: Press the RESET button located near the AUX port on the front panel if abnormal operation occurs.
• Q: What should I do if I don’t have a suitable ground wire in the boat wiring harness?
  • A: Connect the black ground wire to the boat chassis.

“`

I
Quick Start Guide
Marine Digital Media Receiver.
· · · · · · · · · · · · · · · ·
To download the complete. model-specific manual. please visit
www.dualav.com or call 1-866-382-5476. 9AM-5PM EST (Monday-Friday).

Before You Start

· Consult a qualified technician for instructions. Dual always recommends professional installation.
· Disconnect negative battery terminal. · Remove trim ring from unit (if installed). · Insert the removal keys. and remove the mounting sleeve from the head unit.
Note: Most boats require an installation kit. wiring harness and/or antenna
adapter (all sold separately) to properly install the head unit in the boat.
Installation Process
1. Carefully remove the existing head unit. 2. Connect wiring harness. Consult a qualified technician if you are unsure. 3. Mount the head unit using the mounting sleeve or ISO brackets (depending
on your boat’s dashboard). 4. Connect wiring harness and antenna. Test the head unit for correct operation. 5. Snap trim ring into place.

Wiring Connections
The chart below the connection for each wire in the wiring harness.

Color
Red Yellow Black Blue White White/ Black Gray Gray/ Black Green Green/ Black Violet Violet/Black

Connection

12V Ignition / Accessory 12V Battery / Memory Ground
Power Antenna / Amp Turn-on Left Front (+) Left Front (-) Right Front (+) Right Front (-) Left Rear (+) Left Rear(-) Right Rear (+) Right Rear (-)

Tip:
When a suitable ground wire is not present in the boat wiring harness. connect the black ground
wire to the boat chassis.
Fuse:
When replacing the fuse. make sure new fuse is the correct type and amperage. Using an incorrect
fuse could damage the radio.

Mounting the Head Unit: Typical DIN mounting
Step 1:
Insert the mounting sleeve into the installation kit or dashboard.

– Dashboard or Installation Kit

Dashboard or Installation Kit
Step 2:
Bend multiple mounting tabs around the mounting sleeve until the mounting
sleeve is secure.
Mounting Tabs

Step 3:
Connect all wiring harnesses and slide the head unit into the
mounting sleeve until it clicks into place.

Dashboard o, Installation Kit

Mounting the Head Unit: ISO mounting
Using the existing brackets or the brackets supplied with the installation kit, mount the brackets to the sides of the head unit with the screws supplied with the
head unit.

Single DIN
OtcoratiYe Bezel

~
~ j Existing
BrKbts

General Operation

Power On/Off Changing Modes

Press the ~ button to turn the unit on. Press ~ again to

turn unit off.

..~,

lo
Press SOURCE to select between Radio, USB,

Bluetooth. AUX.

Modes of operation are shown in the display.

Volume Adjust volume using volume knob.

Dimmer Press DIM to select the dimmer level and adjust it.

Mute Press~ to silence the audio. Press~ again to resume
listening at the previously selected volume.

Auxiliary Inputs ‘ Insert a 3.5mm cable in the unit’s front AUX port.

Reset

Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located near AUX port on the front panel.

Setting the Clock With the unit on. press DISP to display clock time. Press
, and hold DISP until the hours or minutes begin to flash, ‘ then release. Rotate the volume knob to adjust the time.

Display Press DISP to toggle display between various displayed
information.

Audio / Menu

Press volume knob momentarily to select between the audio functions. Press and hold volume knob for more than two seconds to select between the menu functions. Rotate the volume knob left/ right to adjust or activate the desired function/audio.

Audio Zone Press and hold the volume Knob to select the menu, ZONEl
and ZONE2.Rotate the volume Knob right to adjust ZONE OFF,
ZONEl ON, ZONE2 ON, and ZONEl and 2 on.
(Included IR remote can also control them.)
· · · · · · · · · · · · · · · ·
To download the complete Owner’s Manual for your radio, please visit www.dualav.com

Seek Tuning

AM/FM Tuner Operation

Press and hold TUNE

or TUNE

for 2 secs and

release it to auto seek to previous or next strong station.

Manual Tuning

Press TUNE

or TUNE

momentarily to change radio

frequency down or up one step at a time.Press and hold

TUNE

or TUNE

for 3 secs to advance quickly and

release it to stop on the desired station.

Band

Press BAND to select between FM1. FM2. FM3. AMl and AM2 bands. Up to six presets can be programmed for each band. enabling up to 18 FM stations and 12 AM stations to be stored in memory.

Storing Presets

Up to 18 FM and 12 AM stations can be stored. To store a station. select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored. the preset number will appear in the display.

Recalling Presets : Preset stations can be recalled any time by pressing the corresponding preset button.

Auto store

Press and hold the volume knob for more than 2 seconds to display Auto Store. then press DISP to store 18 FM stations and 12 AM stations automatically.

· · · · · · · · · · · · · · · ·
To download the complete Owner’s Manual for your radio, please visit www.dualav.com

USB Operation

Playing MP3 Files To play MP3 files. insert a USB device containing MP3 files.

Track Select

Press TUNE

Press TUNE

song .

to skip to the beginning of the next song . to skip to the beginning of the previous

Fast Forward and Reverse
Pause

Press and hold TUNE or reverse a track.

or TUNE

to fast forward

Press / II to temporarily stop playback. Press / II again to resume playback.

Folder Access

Folder can be found by pressing Folder Up or Folder Down. About 1 second after the folder name is displayed. the first file under the selected folder will be displayed and playback.

Repeat

Press RPTto toggle between RPT ALL. RPT FLO and RPT ONE. · RPT ALL- Plays all tracks on USB device. · RPT ONE – Continuously repeats selected track. · RPT FLO – Continuously repeats all files in current folder.

Random Press ROM to play tracks in random order. press again to cancel the ROM function.

Intro Press INT to plays first 10 seconds of each track. press
again to cancel the INT function.

· · · · · · · · · · · · · · · ·
To download the complete owner’s Manual for your radio. please visit www.dualav.com

Bluetooth® Operation

Preparation

Before using a Bluetooth device. it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process.

Pairing a New Device

The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.
The device name is “Dual Media Player”
Note: The head unit can be in any mode of operation
when pairing is performed.

Streaming Audio Troubleshooting

The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:
· Press to skip to the next available audio track.
· Press to skip to the previous audio track.
· Press / 11 to toggle between play and pause during
playback.

Voice Activation Operation
Bluetooth should be paired between your smartphone and the receiver.Press the voice activation button(!) . and the receiver will switch into Bluetooth mode.This will activate Siri® or Google AssistantTM on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.

Limited Two-Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of two year from the date of the original purchase. (Please visit www.dualav.com for details.) Dual Electronics Corp. agrees.at our option.during the warranty period, to repair any defect in material or workmanship or to furnish an equal new. renewed or comparable product (whichever is deemed necessary) in exchange without charges. subject to verification of the defect or malfunction and proof of the date of purchase.Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for
products purchased and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship
in this product. The following are not covered: installation/removal costs. damage resulting from accident. misuse. abuse. neglect, product modification. improper installation. incorrect line voltage. unauthorized repair or failure to follow instructions supplied with the product. or damage occurring during return shipment of the product.
What to do?
1. Before you call for service. check the troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period. you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable). and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us toll-free at 1-866-382-5476 or by email at cs@dualav.com.
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any
and all other warranties. expressed or implied. including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation. liability. right. claim or remedy in contract or tort. whether or not arising from the company’s negligence. actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect. incidental or consequential damages.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class 8 digital device. pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected. · Consult the dealer or an experienced radio technician for help.
·
Dual
Dual Electronics Corp. Toll Free: 1-866-382-5476 Monday-Friday. 9AM-5PM
www.dualav.com
C2023 Dual Electronics Corp. All rights reserved.
The Bluetooth· word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Siri and Apple are registered trademarks owned by Apple Inc.
Google Assistant and Android are trademark.sowned by Google LLC. Other trademarks and trade names are those of their respective owners.
NSC0423-V01

MXD13
INSTALLATION/OWNER’S MANUAL
Marine AM/FM Receiver with Bluetooth

MXD13 INSTALLATION

Preparation
Please read entire manual before installation. Before You Start · Disconnect negative battery terminal. Consult a qualified technician for
instructions.
Getting Started ·Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve. ·Install mounting sleeve into opening, bending tabs to secure. ·Connect wiring harness and antenna. Consult a qualified technician if you are
unsure. ·Test for correct operation and slide into mounting sleeve to secure. ·Snap trim ring into place.
TYPICAL FRONT-LOAD DIN MOUNTING
METHOD
2

MXD13 INSTALLATION
Wiring Diagram

FUSE
When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could
damage the radio. The unit uses
one 10 amp AGC fuse located beside the Heat Sink

10 AMP AGC Fuse

3

MXD13 OPERATION

Control Locations

123

4

5

6

7

20 19

18 17 16 15 14 13 12 11 10 9 8

1 Power 2 Microphone 3 Volume / Audio 4 Tune / Track Up 5 Tune / Track Down 6 Voice Assist 7 USB Port

8 Auxiliary Input 9 Reset 10 Preset 6 / Folder Up 11 Preset 5 / Folder Down 12 Preset 4 / Random 13 Preset 3 / Repeat 14 Preset 2 / Intro

15 Preset 1 / Play/Pause 16 Dimmer 17 Source 18 Band/Display 19 Bluetooth Talk 20 Mute

4

MXD13 OPERATION

General Operation

Power On/Off Press the button to turn the unit on. Press again to turn the unit off.

Changing Modes Press SOURCE to select between Radio, USB, Auxiliary Input and Bluetooth. Sources of operation are shown in the display.

Volume Adjust volume using the volume knob.

Mute Press to silence the audio. Press again to resume listening at the previously selected volume.

Display Press DISP to toggle between various displayed information.

Dimmer Press DIM to select the dimmer level: DIM HI/DIM MED/ DIM LOW.

Auxiliary Inputs Insert a 3.5mm cable in the unit’s front AUX port.

Setting the Clock With the unit on, press BAND/DISP to display clock time. Press and hold BAND/DISP until the hours begins to flash, then release.

Rotate the volume knob left or right to adjust the hours, then press BAND/DISP. When the minutes begins to flash, rotate the volume knob left or right to adjust the minutes.

Press BAND/DISP momentarily to save the selected time.

Reset Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located on the front panel.

Audio / Menu Press the volume knob momentarily to select between audio functions.

Press and hold the volume knob for more than two seconds to select between the menu functions.

Audio Zone

Rotate the volume knob left/right to adjust or activate the desired function/audio.
Press and hold the volume Knob to select the menu. ZONE 1 and ZONE 2.Rotate the volume Knob right to adjust ZONE OFF. ZONE1 ON. ZONE 2 ON. and ZONE 1 and 2 on. (Included IR remote can also control them.)

5

MXD13 OPERATION

AM/FM Tuner Operation

Seek Tuning Manual Tuning

nn ll Press and hold TUNE

or TUNE

for two seconds

to auto seek to the previous or next strong station.

nn ll Press TUNE

or TUNE

momentarily to change

radio frequency up or down one step at a time. Press

nn ll and hold TUNE

or TUNE

for three seconds

to advance quickly, then release it to stop on desired station.

Band

Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to six presets can be programmed for each band, enabling up to 18 FM stations and 12 AM stations to be stored in memory.

Storing Presets

To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than two seconds. When stored, the preset number will appear in the display.

Recalling Presets Preset stations can be recalled anytime by pressing the corresponding preset button.

Automatically Store

Press and hold the volume knob for more than two seconds, then press DISP to 18 FM stations and 12 AM stations automatically.

Preset Scan Stations Touch PS to recall each preset station that has been stored in memory for each band.

6

MXD13 OPERATION

USB Operation

Playing MP3 Files Track Select
Fast Forward and Reverse
Pause Folder Access

To play MP3 files, insert a USB device containing MP3 files.

Press TUNE

to skip to the beginning of the next

ll nn track. Press TUNE

to skip to the beginning of the

previous track.

ll nn Press and hold TUNE or TUNE

to fast forward

or reverse a track.

Press / II to temporarily stop USB playback.
ll Press / II again to resume playback.

Folders can be found by pressing Folder Up or Folder Down. About one second after the folder name is displayed, the first file under the selected folder will be displayed and playback will begin.

Repeat

Press RPT to toggle between RPT ALL, RPT FLR and RPT ONE. · RPT ALL – Plays all tracks on USB device. · RPT ONE – Continuously repeats selected track.

Random Press RDM to play tracks in random order; press again to cancel the RDM function.

Intro Press INT to play the first 10 seconds of each track; press again to cancel the INT function.

7

MXD13 OPERATION

Bluetooth Operation

Preparation

Before using a Bluetooth device, it must be paired and connected. Ensure that Bluetooth is activated on your device before beginning the pairing process.

Pairing a New Device

The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner’s manual for your device for more details.

The device name is “Dual Media Player”. The Bluetooth passcode is “1234”.

Note: If passcode “1234” does not pair your device to the receiver, use passcode “0000”.

Note: The head unit can be in any mode of operation when pairing is performed.

Streaming Audio Troubleshooting

The head unit supports A2DP wireless streaming audio from a Bluetooth mobile device directly to your head unit. The following functions can be used to control the music:

ll · Press

to skip to the next available audio track.

nn · Press

to skip to the previous audio track.

l · Press / II to toggle between play and pause during playback.

8

MXD13 OPERATION
Voice Activation
Your receiver is designed with an easy access voice activation button to use Siri® or the Google AssistantTM via your car’s Bluetooth. Interact with your smartphone assistant while you drive with only the push of a button! Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google AssistantTM on your smartphone. You will need to manually switch back to the previous or desired mode once this operation is terminated.
9

MXD13 OPERATION

Specifications

FM Tuner

Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz- 13kHz

AM Tuner

Tuning range: 530kHz-1710kHz Usable sensitivity: <42dBu Frequency response: 30Hz-2.2kHz

General

Speaker output impedance: 4~8 ohms Line output voltage: 1.2 Volts RMS Dimensions: 7″ x 2″ x 2″ (178 x 50 x 50 mm)

Design and specifications subject to change without notice.

CEA-2006 Power Standard Specifications (reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 14 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 75dBA (reference: 1 watt into 4 ohms)
10

MXD13 OPERATION

Troubleshooting

Problem

Cause

Action

Unit will not turn on (no power)
Unit has power (but no sound)
Unit blows fuses

Yellow wire not connected or incorrect voltage Red wire not connected or incorrect voltage

Check connections for proper voltage (11~16VDC)

Black wire not connected

Check connection to ground

Fuse blown

Replace fuse

Speaker wires not connected

Check connections at speakers

One or more speaker wires touching each other or touching chassis ground

Insulate all bare speaker wires from each other and
chassis ground

Yellow or red wire touching chassis ground

Check for pinched wire

Speaker wires touching chassis ground

Check for pinched wire

Incorrect fuse rating

Use fuse with correct rating

NO FILE appears on display

No playable MP3 files found on the device

Check the device for valid MP3 files

NO SUPPORT appears on display

An invalid ID3 tag version is present

Version 1.0 to 2.0 ID3 tags are supported.

11

MXD13 OPERATION

Limited Two-Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of two years from the date of the original purchase. Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

What to do? 1. Before you call for service, check the
troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: · Call us toll-free at 1-866-382-5476 · E-mail us at cs@dualav.com Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.

12

MXD13 OPERATION

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
13

Dual Electronics Corp. Toll Free: 1-866-382-5476
www.dualav.com ©2024 Dual Electronics Corp. All rights reserved.
Other trademarks and trade names are those of their respective owners.
NSA1223-V01

0

· 0

ll

.J

I
0
l
0

DMP623/DMP623B
INSTALLATION/OWNER’S MANUAL
6.s· Dual Cone Marine Speakers

Dual

·

DMP623/DMP623B INSTALLATION

Preparation/Installation
Please read entire manual before installation.
Before You Start · Disconnect negative battery terminal. Consult a qualified technician for instructions. · Use extreme caution when drilling holes to avoid damaging fuel lines. hydraulic lines
or existing wiring. · If additional wiring is required. we recommend that you run all wires prior to
mounting your speaker in place. · Use the highest quality connectors for a reliable installation and to minimize signal
and power loss. · Use caution before you drill or cut! Be careful not to cut or drill into gas tanks. fuel lines.
hydraulic lines. vacuum lines or electrical wiring. · Avoid running wires over. near. or through sharp edged surfaces. We suggest you
also use rubber grommets to protect any wires routed through metal.
Mounting and Installation · Determine where the speakers will be mounted. Ensure an area large enough for
the speaker to mount evenly. Be sure the mounting location is deep enough for the speaker to fit. · Using an appropriate tool. cut a 5.13″ diameter mounting hole. · Remove grille from speaker by inserting the release key into the locking tab slots located at the top and bottom of the grille. Gently apply pressure towards the center of the grille to release the locking tabs. · Use the speaker as a template to mark the locations for the mounting screws. Drill the mounting screw holes with a 1/8″ pilot bit. Route speaker wires and connect to speakers. observing speaker polarity. · Install speaker into opening using supplied hardware and test for correct operation. · Align the speaker grille locking tabs and snap grille into place.

RELEASE KEY 2

TYPICAL MOUNTING

g· DMP623/DMP623B WARRANTY

Limited One Year (Or Two Year*) Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product [whichever is deemed necessary] in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized DUAL dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software, installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www. dualav.com.
Warranty Coverage Limited 1-year warranty when purchased from an authorized Dual dealer. or *Limited 2-year warranty when purchased from and professionally installed by an authorized Dual dealer.(Proof of purchase and Installation required]

What to do? 1. Before you call for service, check the
troubleshooting guide in your owner· s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period, you must carefully pack the product [preferably in the original package] and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name, a return UPS shipping address [P.O. Box not acceptable]. and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
· Call us toll-free at 1-866-382-5476 · E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the company’s negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.

3

·

DMP623/DMP623B SPECIFICATIONS

Specifications

Outside Diameter 7.13″ Mounting Depth 2.13″
Mounting Height .87″ Cut-out Diameter 5.13″ Frequency Response 45Hz-15kHz
Sensitivity 88dB lW/1 M Impedance 4ohms RMS Power 20 Watts per speaker Peak Power 100 Watts per speaker
Design and specifications subject to change without notice.

Dual
Dual Electronics Corp. Toll Free: 1-866-382-5476 9AM-5PM EST. Monday- Friday
www.dualav.com ©2023 Dual Electronics Corp. All rights reserved.
NSA0423-V01

”

·

I I

www.dualav.com
Follow us to keep up to date with new products and information!
Facebook @Dual Electronics
lnstagram @Dual Electronics
Twitter @DualElectronicsCorp

SG3/SG4/SG5
INSTALLATION/OWNER’S MANUAL
Universal Marine Splash Guard
Dual

mr SG3/SG4/SG5 INSTALLATION

Preparation
Protect your marine head unit from damage and the harsh marine environme~t with the SG3/SG4/SG5 splash guard. This marine grade cover fits most single DIN size head units and will protect against splashes and debris.

Before You Start · Disconnect negative battery terminal. Consult a qualified marine technician or service
manual for instructions.

· Due to differences in head units. it is recommended to temporarily mount head unit in splash guard before installation to ensure splashguard cover will close properly.

· Use extreme caution when drilling holes to avoid damaging fuel lines or existing wiring.

Cutout Dimensions
I

1

1.17 inches

– – – – – – – – – – – 1 92.2093.4in0cmhems 1 1 – – – – – – – – – – – – + 1

30mm

1

2.00 inches 51 mm

7.80 inches 198mm

2.64 inches 67mm

I
7/32 inch 5.2mm

Opening and Closing the Splash Guard · Press the release button on top to open the cover and access the head unit. · To close. fold the cover up and press until it clicks into place.
Release Button ~

2

[IJ SG3/SIWSG5 INSTALLATION
Mounting
Mounting · Open splashguard and detach side covers by pulling outward from the inside of side
cover. · Insert supplied mounting bolts through washers and into mounting holes as shown
below. · Place gasket between back side of splash guard and mounting surface and secure the
splash guard in place with supplied nuts. · Install head unit into splash guard opening. This may vary depending on head unit
manufacturer and installation instructions. Refer to head unit owner’s manual for details. · Reattach side covers by aligning them and pushing firmly into place.
~
,,,,@
TYPICAL MOUNTING *Head Unit not included.
3

·

SG3/SG4/SG5 WARRANTY

Limited One Year Warranty

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase.
Dual Electronics Corp. agrees. at our option. during the warranty period. to repair any defect in material or workmanship or to furnish an equal new. renewed or comparable product (whichever is deemed necessary) in exchange without charges. subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period.
Who is covered? This warranty is extended to the original retail purchaser for products purchased from an authorized Dual dealer and used in the U.S.A.
What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: software. installation/ removal costs. damage resulting from accident. misuse. abuse. neglect. product modification. improper installation. incorrect line voltage. unauthorized repair or failure to follow instructions supplied with the product. or damage occurring during return shipment of the product. Specific license conditions and copyright notices for the software can be found via www.dualav.com.

What to do? 1. Before you call for service. check the
troubleshooting guide in your owner’s manual. A slight adjustment of any custom controls may save you a service call.
2. If you require service during the warranty period. you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center.
3. Please describe your problem in writing and include your name. a return UPS shipping address (P.O. Box not acceptable). and a daytime phone number with your shipment.
4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods:
· Call us toll-free at 1-866-382-5476 · E-mail us at cs@dualav.com
Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties. expressed or implied. including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation. liability. right. claim or remedy in contract or tort. whether or not arising from the company’s negligence. actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect. incidental or consequential damages.

Dual Electronics Corp. Toll Free: 1-866-382-5476 Monday – Friday, 9AM – 5PM EST
www.dualav.com ©2023 Dual Electronics Corp. All rights reserved.
NSA0914-V02

References

• Premium Audio for Car, Marine, & Home - Dual Electronics
• Premium Audio for Car, Marine, & Home - Dual Electronics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>