nVent PKM10H3GBSF Metal Pressure Clip with Nail Gun Insert Owner’s Manual

nVent PKM10H3GBSF Metal Pressure Clip with Nail Gun Insert

Product Information

Specifications

Features

• Clips onto nozzle of gas or battery-actuated nail guns allowing for hands-off installation at structure or from the floor using a pole
• Ideal for smaller runs of cables
• Flexible clip retains shape and allows for cables to be inserted after installation
• Rounded edges help prevent cable damage
• Cables are neatly installed providing a consistent and professional appearance
• Low profile allows for installations in tight spaces

Additional Product Details
The nVent products should only be installed and used as indicated in nVent’s product instruction sheets and training materials. Instruction sheets can be found at www.nvent.com or obtained from a nVent customer service representative. Failure to follow nVent’s instructions and warnings may result in product malfunction, property damage, serious bodily injury, death, and may void the warranty.

Diagrams
No diagrams were provided in the user manual.

Contact Information

• Europe Netherlands: +31 800-0200135
• France: +33 800 901 793
• Europe Germany: 800 1890272
• Other Countries: +31 13 5835404
• APAC Shanghai: + 86 21 2412 1618/19
• Sydney: +61 2 9751 8500

Brands
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER All brands mentioned are trademarks of their respective owners.

Disclaimer
nVent reserves the right to change specifications without notice.

Product Usage Instructions

1. Step 1: Preparation
   Before using the metal pressure clip with nail gun insert, ensure that you have the necessary tools and materials ready. This includes the nail gun, the metal pressure clip, and the cables you wish to install.

2. Step 2: Attaching the Clip
   Attach the metal pressure clip onto the nozzle of your gas or battery-actuated nail gun. Make sure it is securely fastened and does not move during operation.

3. Step 3: Hands-off Installation
   If you are installing cables at a structure or from the floor, use a pole to hold the nail gun with the attached clip. This allows for hands-off installation, providing convenience and efficiency.

4. Step 4: Cable Insertion
   The flexible clip retains its shape, allowing you to insert cables even after installation. Simply push the cables into the clip, ensuring they are securely held in place.

5. Step 5: Rounded Edges
   The rounded edges of the clip help prevent cable damage. When inserting cables, make sure to align them properly and avoid any sharp bends or twists.

6. Step 6: Neat and Professional Appearance
   By using the metal pressure clip with nail gun insert, your cables will be neatly installed, providing a consistent and professional appearance. This is especially useful for smaller runs of cables.

7. Step 7: Tight Space Installations
   The low profile of the metal pressure clip allows for installations in tight spaces. This feature enables you to easily install cables in areas where traditional methods may not be feasible.

8. Step 8: Safety Precautions
   Always follow nVent’s product instruction sheets and training materials to ensure safe and proper usage of the metal pressure clip with nail gun insert. Failure to do so may result in product malfunction, property damage, serious bodily injury, or death.

Frequently Asked Questions (FAQ)

• Q: Can I use the metal pressure clip with any nail gun?
  A: The metal pressure clip is designed to be compatible with gas or battery- actuated nail guns. Ensure that the clip securely attaches to the nozzle of your nail gun before use.

• Q: What is the maximum cable capacity of the metal pressure clip?
  A: The metal pressure clip has two catalog numbers: PKM10H3GBSF and PKM16H3GBSF. The first one has a cable capacity of 10, while the second one has a cable capacity of 16.

• Q: Can I insert cables into the clip after installation?
  A: Yes, the flexible clip retains its shape and allows for cable insertion even after installation. This feature provides flexibility in managing your cables.

• Q: Are the rounded edges of the clip important?
  A: Yes, the rounded edges help prevent cable damage. When inserting cables, make sure to align them properly and avoid any sharp bends or twists to ensure optimal cable protection.

• Q: Can I use the metal pressure clip in tight spaces?
  A: Yes, the low profile design of the metal pressure clip allows for installations in tight spaces. It provides a convenient solution for areas where traditional methods may not be suitable.

FEATURES

• Clips onto nozzle of gas or battery-actuated nail guns allowing for hands-off installation at structure or from the floor using a pole.
• Ideal for smaller runs of cables.
• Flexible clip retains shape and allows for cables to be inserted after installation.
• Rounded edges help prevent cable damage.
• Cables are neatly installed providing a consistent and professional appearance.
• Low profile allows for installations in tight spaces.

SPECIFICATIONS

• Finish: nVent CADDY Armour
• Material: Spring Steel; Nylon

Catalog Number| Cable Capacity| Diameter(Ø)| Hole Size(HS)| Length(L)
---|---|---|---|---
PKM10H3GBSF| 10| 0.390″| 0.120″| 6 3/4″
PKM16H3GBSF| 16| 0.390″| 0.120″| 9 1/4″

ADDITIONAL PRODUCT DETAILS

• Supports cable diameters up to 1/2″ (13 mm) when installed with a standard 1/4″ (6 mm) washer.
• Nail gun insert is compatible with BeA® CN60-688ES, Hilti® BX 3, GX 3, DEWALT® Trak-It C3, SPIT® PULSA 800E, 700, 1000 or equivalent nailers.
• Please consult with the nail manufacturer to evaluate the static load of the nail and type of concrete used for the installation.

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support

Europe

• Netherlands: +31 800-0200135
• France: +33 800 901 793

Europe

• Germany: 800 1890272
• Other Countries: +31 13 5835404

APAC

• Shanghai: + 86 21 2412 1618/19
• Sydney: +61 2 9751 8500

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

nVent.com

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>