NUBEO MS-WIN-SAT-01 Mainspring Satellite Watch Winder Instruction Manual

NUBEO MS-WIN-SAT-01 Mainspring Satellite Watch Winder

The Mainspring Satellite Watch Winder is a device that helps keep automatic watches running when not being worn.
Not only does the watch winder keep the watch parts lubricated and moving, but it also helps extend the overall life of the watches.
For more details on operating this watch winder please refer to the enclosed booklet or visit :
im.mainspring.store

WHAT’S INSIDE

Your Mainspring Satellite Watch Winder comes packed with the following:

1. Watch Winder
2. Type-C USB Cable
3. USB Power Adapter x 1
4. Adapters x 3pcs

PREPARATION BEFORE USE

First, manually wind up the automatic mechanical watch that stops or has insufficient kinetic energy or hold it in your hand and shake it for sixty or seventy times, so that it has more than half of the kinetic energy, and then put it into the shaking table after time calibration.

GEAR DESCRIPTION

1. This product is a fully automatic gear without manual adjustment. Turn clockwise for 5 minutes and stop for 40 minutes, and turn counterclockwise for 5 minutes and stop for 40 minutes so as to circulate.
2. Open the cover and stop automatically. When the cover is opened to take and put the meter, the turntable will automatically stop, and the decorative lights will light up, and the decorative lights will automatically extinguish within 2 minutes.

MATTERS NEEDING ATTENTION IN USE

1. Please be sure to take and put the watch when the shaking table is stopped. Never take and put the watch when the shaking table is rotating, so that avoid the motor being blocked and damaged when it is rotating.
2. Never use the power supply and battery at the same time. Please choose a power supply method.
3. When the shaking table works normally, the power consumption is very low and it can be used continuously, but it can be used continuously for about 30 days. It is recommended to turn off the main power supply and let the shaking table rest for 12 hours.
4. The load of the turntable motor can reach 450g, and the load of the turntable must not exceed the load of the motor.
5. The working temperature of the shaking table is -19 to 45 degrees.

CARE AND MAINTENANCE

1. Please do not place your watch winder in direct sunlight or other heat sources such as radiators, electric heaters or stoves.
2. Your watch winder should be kept away from water and liquids.
3. Avoid placing your winder next to areas of excessive sand, dust or other objects that may vibrate, as this may also impact the functioning of your winder.
4. Please store your watch winder at room temperature.
5. When the watch winder is on, make sure there is nothing stopping or blocking it from turning.
6. Unplug your watch winder if not being used for a prolonged period of time.
7. Watch winders are not toys. We recommend that you store your winder carefully out of reach of children.
8. Your watch winder does not require any special maintenance. We recommend cleaning it regularly with a soft, damp cloth, then wiping it dry.

RECYCLING

Your watch winder, must not be disposed of as household waste.
These elements must be taken to a waste collection point that recycles electrical devices and batteries.
By ensuring these products are disposed of properly you can help prevent potentially harmful effects, both to the environment
and human health. Recycling helps conserve natural resources. For further information on recycling this product please contact your local authority, waste collection site, or place of purchase.

Dartmouth Brands Ltd
C/O The Wow Company
Hikenield House,
East Anton Court,
Icknield Way, East Anton,
Andover SP10 5RG,
United Kingdom.

Documents / Resources

| NUBEO MS-WIN-SAT-01 Mainspring Satellite Watch Winder [pdf] Instruction Manual
MS-WIN-SAT-01, Mainspring Satellite Watch Winder, Satellite Watch Winder, Watch Winder, MS-WIN-SAT-01, Winder
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>