chiphy F216 Softlighting Floor Lamp Instruction Manual
- June 15, 2024
- CHIPHY
Table of Contents
chiphy F216 Softlighting Floor Lamp
Product Information
Specifications
- Light source power: Max. 60W 2; LED bulb (5~20W) 2
- Components included: lampshade1, supporting tubes and electric appliances suite1 (tube A, B, C, D), accessories bag1 (ball screw pipe(long)1, screw pipe(short)1, spring1, gasket1, foot4, tie1), bulb2
Product Usage Instructions
Installation
- Identify the different tubes: Tube A, Tube B, Tube C, and Tube D.
- Place the lamp holder on Tube A.
- Connect Tube A with the lamp holder.
- Repeat steps 2 and 3 for the remaining Tube A and lamp holders.
- Insert the bulb into Tube A.
- Repeat steps 2 to 5 for Tube B.
- Attach the plastic sleeve to Tube C.
- Connect the lamp holder to Tube C.
- Attach the tube belt to Tube D.
- Connect Tube C with the lamp holder.
- Attach the tube belt to Tube D.
- Tighten all connections between the tubes to avoid bending during installation.
Maintenance of Lampshade
- To maintain the lampshade, gently wipe it with a soft, dry cloth.
- Avoid using abrasive cleaners or solvents that may damage the surface.
Light Source Power
- The maximum power for each light source is 60W.
- Alternatively, you can use LED bulbs with a power range of 5W to 20W.
FAQ
- Q: What is the maximum power allowed for the light source?
- A: The maximum power allowed for the light source is 60W.
- Q: Can I use LED bulbs with this product?
- A: Yes, you can use LED bulbs with a power range of 5W to 20W.
- Q: How should I clean the lampshade?
- A: Gently wipe the lampshade with a soft, dry cloth. Avoid using abrasive cleaners or solvents that may damage the surface.
Installation Notes
The installation process should be strictly followed by the installation procedure and care should be taken not to require any heavy-force operation. In particular, the installation of gasket and spring in steps 9 and 10 should be taken care to place them under the stents of the lamp cover. Please ensure that the connection between the tubes are correct and tightened tightly.
Maintenance
Maintenance of lampshade
There may be wrinkles since it is in a combined folded state when you receive it. Please don’t worry. After properly installed, the pull wrinkle supported by the light stand will be reduced or even eliminated. It is made of Tyvek (non-woven fabric), which is not easy to deform, waterproof and mildew-proof, and can be wiped with a damp cloth with an appropriate amount of detergent.Also keep an eye out for your pets, they may be very interested in this fabric!
Light source power
- Max . 60W2; LED bulb (5~20W) 2.
Package Included
- lampshade1, supporting tubes and electric appliances suite1 (tube A,B,C,D), the accessories bag1 (ball screw pipe(long)1, screw pipe(short)1, spring1, gasket1, foot 4, tie1), bulb2.
Specification
- Article name: SOFTLIGHTING Floor Lamp
- Modle: F2016
- Item NO.: SF210-107/SF211-107/SF220-107
- Material: Tyvek(Dupont),Stainless Steel
- Assembly: Collapsible
- Style: Contemporary,Modern
- Scenario: Living room/Bedroom/Game room/Study room
- Shade Color: White / Brown Gradient / Purple Gradient Pink Gradient/Mable
- Electric Cord: 98 inches, foot switch
- Lamp holder: E26127x2
- Power: MAX.60W
Installation Instructions
Tips: To avoid bending during installation, please ensure that the connection between the tubes is correct and tightened tightly.
After / Before
PLS assemble the lamp step by step according to the installation diagram(figure 1 -figure 15)
Warning
CAUTION: RISK OF FIRE – USE MAX 2*60W, 120V.
DRY LOCATIONS ONLY
HOUSEHOLD USE
Designed and made by Chiphy
Copyright @ 2014-2023 Chiphy All Rights Reserved