UGREEN MU102 FUN+ Wireless Mouse User Manual

UGREEN MU102 FUN+ Wireless Mouse

Product Specifications

• Model: MU102
• Wireless Mouse
• 2.4G Connection
• Bluetooth 1 and Bluetooth 2 Indicators
• DPI Indicator
• USB Receiver

Product Usage Instructions

System Selection:
To select the system (Windows or macOS), follow these steps:

1. Windows: Slide the switch to WIN
2. macOS: Slide the switch to MAC
3. The mouse will automatically turn on when system switching is completed.

2.4G Connection Setup:
To set up the default 2.4G connection:

1. Step 1: Take the receiver out and insert it into your device.
2. Step 2: Randomly click and move the mouse to ensure it works normally.

Forced Pairing (If Connection Fails):
If the connection fails, follow these steps for forced pairing:

1. Take the receiver out of the USB port.
2. Press and hold Left + Scroll Wheel + Right simultaneously for 3 seconds until the 1 indicator starts blinking.
3. Insert the receiver into the device.

Frequently Asked Questions (FAQ):

• Q: How do I know if the mouse is connected via Bluetooth?
  A: The Bluetooth 1 and Bluetooth 2 indicators will show the connection status.

• Q: Can I use this mouse with multiple devices?
  A: Yes, you can use the USB receiver to connect to different devices easily.

FUN+ Wireless Mouse
Model: MU102

Product Overview

1. Right Button
2. Left Button
3. Scroll Wheel
4. Forward Button
5. Backward Button
6. DPI Indicator
7. Win/Mac System Switch
8. Mouse Feet Film (Removable)
9. Optical Sensor
10. 2.4G Indicator
11. Bluetooth 1 Indicator
12. Bluetooth 2 Indicator
13. DPI Switch Button/Device Switch Button
14. USB Receiver

System Selection

• Slide the switch on the bottom of the mouse to select system.
• The mouse will automatically turn on when system switching is completed.

Default (Connection G2

1. Step 1 : Take the receiver out and insert it into your device.
2. Step 2 : Randomly click and move the mouse to make sure it works normally

Forced Pairing (If connection fails based on the steps above)

1. Take the receiver out of the USB port.
2. Press and hold “Left + Scroll Wheel + Right ” simultaneously for 3 seconds until the “1” indicator starts blinking.
3. Insert the receiver into the device.

Bluetooth Connection

The mouse can connect to 2 Bluetooth devices simultaneously. For pairing the 1st Bluetooth device:

1. Short press the DPI switch button once to enter pairing mode, at this time the indicator “2” flashes quickly.
2. For Windows 10 or later, please follow the popup windows to complete the pairing. While for other systems, please connect to “UGREEN BLE Mouse” or “UGREEN B3.0 Mouse” from your laptop/tablet/smartphone Bluetooth list.
3. The indicator “2” will be on when connection is completed.
   Please refer to the steps above if you need to pair the 2nd device.

Forced Pairing (If connection fails based on the steps above)

1. Press and hold “Left + Scroll Wheel + Right ” simultaneously for 3 seconds until the “2” or “3” indicator starts blinking.
2. Enter the Bluetooth devices list of the connected device, search the mouse Bluetooth and connect.

Mode Switching

• The mouse can connect to 3 devices simultaneously and the indicators corresponding to the device are “1”, “2” and “3”.
• Short press the DPI switch button to switch between the connected devices. The corresponding indicator will be on for about 3s when switching is succeeded.

DPI Adjustment

1. Press and hold the DPI switch button for 3s to adjust the mouse sensitivity in the order of “1600>2000>4000>1000”.
2. The indicator may vary due to different DPI adjustments.

Low Battery

1. The mouse will turn off automatically when the battery is too low.
2. When the red indicator keeps blinking for about 10s, it indicates that the battery is lower than 5%. Please charge it in time for further performance.

Specifications

• Model MU102
• Connectivity Bluetooth/2.4GHz
• Bluetooth Version 5.0
• Frequency Band 2400MHz-2483.5MHz
• Max. RF Output Power 4dBm (conducted)
• Transmission Distance 10m/33ft Max (no blocking)
• DPI (Sensitivity) 1000/1600/2000/4000 DPI
• Charging Port USB-C
• Battery Type Polymer Lithium-ion Battery
• Battery Capacity 500mAh 3.7V (1.85 Wh)
• Limited Charging Voltage 5.25V
• Charging Time About 2 hours
• Compatible Systems
  • Windows 7/8.1/10/11
  • macOS 10.5 or later
  • Linux
  • Chrome OS
  • iPadOS 14 or later
  • Android 5.0 or later
  • iOS 15 or later
  • Harmony OS

The data are measured by UGREEN lab but may vary based on specific circumstances.

Package Contents

WARNING

• This product contains a built-in polymer lithium-ion battery. Do not disassemble, hit, crush, or throw it into the fire.
• If the battery is severely swollen, please stop using it.
• Do not expose the product to excessive temperature.
• Stop using when the battery is submerged.
• Please keep this product out of the reach of children.
• If the battery has been accidentally swallowed or placed inside any part of the body, please seek medical attention immediately.
• Please do not shine the light directly into human eyes.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

FCC NOTE:

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
• These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• The device has been evaluated to meet general RF exposure requirement.
• The devicecan be used in portable exposure condition without restriction.

Important WEEE Information

• This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please
  take this product(s) to designated collection points where it will be accepted free of charge.

• Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.

• Please contact your local authority for further details of your nearest designated collection point.

• Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.

For professional users in the European Union
If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.

For disposal in countries outside of the European Union
This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

EU Declaration of Conformity

• Hereby, Ugreen Group Limited declares that the product is in compliance with Directive 2014/53/EU & 2011/65/EU. Learn more about the EU
• Declaration of Conformity is available at the following internet address:
  • https://www.ugreen.com/download/
  • Ugreen Group Limited
  • Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
  • Longhua, Shenzhen, China
  • EU REP: Ugreen Group GmbH
  • Add: Mannheimer Str. 13, 30880 Laatzen, Germany

GB Declaration of Conformity

• Hereby, Ugreen Group Limited declares that the product is in compliance with Directive UK Radio Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn more about the GB Declaration of Conformity is available at the following internet address: https://www.ugreen.com/download/
  • Ugreen Group Limited
  • Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road,
  • Longhua, Shenzhen, China
  • UK REP: Acumen Intemational Business Consultancy Limited
  • Add: 94 Ock Street, Abingdon, OX14 5DH, UK

IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>