V-TAC VT-859 Fitting Round White Instruction Manual
- March 2, 2024
- V TAC
Table of Contents
**V-TAC VT-859 Fitting Round White Instruction Manual
**
TECHNICAL DATA
MODEL: VT-859
SKU: 3696, 3697
MAX WATTAGE: 35 W
SHAPE: Round
HOLDER: GU10 (Included)
MATERIAL: Gypsum
VOLTAGE: AC: 220-240, 50Hz
PROTECTION RATING: IP20
UNIT COLOUR: White
DIMENSION: Ø100 x 40 mm
CUT OUT SIZE: Ø103 mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. This product is warranted for manufacturing defects only.
WARNING
- Please make sure to turn off the power before starting the installation.
- Installation must be performed by a qualified electrician.
- For Indoor use only
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
This marking indicates that this product should not be disposed of with other household wastes.
Caution, risk of electric shock.
INSTALLATION INSTRUCTION
- Cut the hole as per the cut out using pepper tool.
- Insert GU10 lamp holder (Included).
- Put the fitting into the ceiling hole & connect with the power cables.
- Fix the fixture using proper screws.
- Finish the cracks around the light fixture with gypsum.
- Insert GU10 spotlight (Not Included) into the lamp holder.
- Fix the GU10 spotlight.
- Switch on the power.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>