Playground Equipment Flower Drum Outdoor Musical Equipment Instruction Manual
- May 15, 2024
- Playground Equipment
Table of Contents
Instruction Manual
Flower Drum Install
STEP: 1
Connect flower drum top to post using two (2) M6x12 screws STEP: 2
Dig footer (18” x 18” x 18”) and fill with concrete. Allow concrete to begin
to set before sinking J-Bolts into the mixture.
STEP: 3
Using J-Bolts, slide bolts through each of the holes in base plate of the
flower drum. (The J portion of the bolt will be buried in the concrete.)
Loosely attach bolts to plate with lock nuts and washers. The extra nuts will
be placed just a few threads on the top of each J-Bolt to help hammer the
entire assembly firmly into the concrete mix. (This helps make sure the bolt
does not strip due to the hammering.) STEP: 4
Once the bolts are set, let concrete cure for at least 48 hours.
(Follow concrete manufacturer’s recommendations with a minimum of 2500 PSI) It
may be necessary to retighten the nuts at this time.
STEP: 5
Cover The bottom plate of the flower drum using the included plastic cover
and remaining included hardware. 
10859 Washington St. Suite 200, Indianapolis,
IN
Created By: Aaron Price
Date Modified: 00/00/00