V-TAC VT-6279 LED Glass Tube Instruction Manual
- May 15, 2024
- V TAC
Table of Contents
V-TAC VT-6279 LED Glass Tube
Specifications
- Model: VT-6279, VT-1221, VT-1575
- SKU: 7796, 7797, 7798, 2981, 2982, 2983, 7799, 7801, 7803
- Watts: 9W, 18W, 20W
- Lumens: 850 Lm, 1850 Lm, 2100 Lm
- CRI: >80
- DF: >0.5 (for 9W), >0.7 (for 18W and 20W)
- Beam Angle: Sphere360
- Body Type: G13
- Base: G13
- IP Rating: IP20
- Life Span: 25,000 Hours
- On/Off Cycle: >15,000
- Dimension: 28×600 mm (for VT-6279), 28×1200 mm (for VT-1221), 28×1500 mm (for VT-1575)
- Input Power: AC:220-240V, 50Hz
- Starter: Dummy starter included for LED tubes
Product Usage Instructions
Introduction & Warranty Information
This product should not be disposed of with other household wastes. Caution:
risk of electric shock. Please refer to the multi-language manual by scanning
the QR code for detailed instructions.
Packing and Installation
To use the electronic ballast fitting, ensure to remove the existing
electronic ballast and rewire the circuit as per the new fitting installation.
It is crucial to have a certified electrician carry out the installation and
wiring.
Installation & Replacement of Fluorescent Lamp (Single Magnetic Ballast Circuit)
- Switch off the power.
- Remove the existing fluorescent lamp.
- Remove the existing fluorescent starter.
- Insert the LED T8 starter.
- Insert the V-TAC LED Tube.
- Switch ON the power.
In case of any queries or issues with the product, contact support at: support@v-tac.eu. For more product range and inquiries, please reach out to our distributor or nearest dealers.
FAQ
-
Q: Can I install the LED tubes myself without a certified electrician?
A: It is recommended to have a certified electrician install to ensure safety and proper wiring. -
Q: What should I do if the LED tube does not turn on after installation?
A: Check the wiring connections and ensure that the power source is functioning correctly. If issues persist, contact customer support for assistance. -
Q: How do I dispose of the product properly?
A: Do not dispose of the product with household waste. Follow local regulations for electronic waste disposal or contact the manufacturer for guidance on proper disposal methods.
TECHNICAL DATA
| MODEL | VT-6279 | VT-1221 | VT-1575 |
|---|---|---|---|
| SKU | 7796,7797,7798 | 2981,2982,2983 | 7799,7801,7803 |
| WATTS | 9W | 18W | 20W |
LUMENS
@Sphere360
| 850 Lm| 1850 Lm| 2100 Lm
CRI| >80| >80| >80
DF| >0.5| >0.7| >0.7
BEAM ANGLE| 160°| 160°| 160°
BODY TYPE| Glass| Glass| Glass
BASE| G13| G13| G13
IP RATING| IP20| IP20| IP20
LIFE SPAN| 25,000 Hours| 25,000 Hours| 25,000 Hours
ON/OFF CYCLE| >15,000| >15,000| >15,000
DIMENSION| 28×600 mm| 28×1200 mm| 28×1500 mm
INPUT POWER| AC:220-240V, 50Hz| AC:220-240V, 50Hz| AC:220-240V, 50Hz
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 3 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages.
WARNING
- Installation should only be done by a certified electrician.
- Operation environment temperature: from -20°C to +45°C.
- Do not use DC electricity.
- Do not modify the fitting to be used with the LED Tube.
- V-TAC LED Tubes are NOT designed to be used in emergency operations.
- For Indoor use only.
- Do NOT use with electronic ballasts. V-TAC LED tubes are not compatible with electronic ballast circuits. To use the electronic ballast fitting you must ensure to remove the electronic ballast from the fitting and rewire the circuit as per new fitting installation as shown below. Ensure the installation and wiring is carried out by a certified electrician.
PACKING
- LED Tube (1PC)
- Instruction Manual (1PC)
- Dummy Starter (1PC)
NEW FITTING INSTALLATION
- Installation should only be done by a certified electrician.
- Switch O¡ the power.
- Ensure the wiring diagram is followed as highlighted.
- Insert V-TAC LED Tube.
- Switch On the power to test the light.
INSTALLATION & REPLACEMENT OF FLUORESCENT LAMP
SINGLE MAGNETIC BALLAST CIRCUIT
- Installation should only be done by a certified electrician.
- Please refer to the wiring diagram for replacing the fluorescent tube on a single magnetic ballast circuit with V-TAC LED Tube.
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT:
SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGES, INQUIRY PLEASE CONTACT OUR
DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000,
BUL.L.KARAVELOW 9B
WEEE Number: 80133970
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>