BrosTrend AC1200 Dual Band WiFi Extender Installation Guide

: June 4, 2024
: BrosTrend

Table of Contents

AC1200 Dual Band WiFi Extender
Method 1: Extend Your WiFi Network via Web UI
Method 2: Extend Your WiFi Network via WPS Button
LED/Descriptions
Documents / Resources

Quick Installation Guide
Dual Band WiFi Extender

AC1200 Dual Band WiFi Extender

Video Installation Guide and Setup Manual are available via this link:
https://brostrend.me/install

Method 1: Extend Your WiFi Network via Web UI

Plug the extender into an electrical outlet in the same room as your existing WiFi router.
Wait until the PWR LED is solid blue.
Connect your WiFi device to the extender’s WiFi network BrosTrend_EXT.
Ensure that the mobile data (if any) function of your WiFi device is disabled.
After connecting to BrosTrend_EXT, you will be directed to the quick setup page. If not, start a web browser and enter re.brostrend.com or 192.168.0.254 in the address bar. Create a login password for future logins (recommended).
Note:
Please do NOT enter re.brostrend.com in the search bar of your browser.
Select a WiFi network (SSID) you want to extend.
Enter the password for the WiFi network you want to extend.
Wait a moment, the “Extended Successfully!” page appears.
Plug the extender into an electrical outlet halfway between your WiFi router and the WiFi dead
zone. Wait until the Signal LED turns on.
Connect your WiFi devices to the extended networks which come with your existing network name and suffixes of _EXT/_5GEXT. WiFi password by default is the same as your existing WiFi network.

Method 2: Extend Your WiFi Network via WPS Button

Plug the extender into an electrical outlet in the same room as your existing WiFi router.
Wait until the PWR LED is solid blue.
Press the WPS button on your router and within 2 minutes press the WPS button on the extender. WPS LED on the extender starts blinking. Wait until the Signal LED turns on. If the Signal LED does not turn on, reset the extender and try Method 1.
Plug the extender into an electrical outlet halfway between your WiFi router and the WiFi dead
zone. Wait until the Signal LED turns on.
Connect your WiFi devices to the extended networks which come with your existing network name and suffixes of _EXT/_5GEXT. WiFi password by default is the same as your existing WiFi network.

LED/Descriptions

PWR LED	Solid on	The extender is powered on.
Blinking	The extender is starting.
Off	The extender is powered off.
WPS LED	Blinking	Trying to set up connection with WiFi router via WPS.
Off	WPS connection is completed or not activated.
Signal LED	Solid blue	Best connection between the extender and your WiFi

router.
Solid red| Not optimal connection between the extender and your WiFi router. Please relocate the extender closer to your WiFi router.
Off| No connection between the extender and your WiFi router. Please relocate the extender closer to your WiFi router.

European Authorized Representative Information:
The Authorized European Representative Information:
Name: Pegasus Trading GmbH
Address: Sperberweg 4G Neuss NRW 41468 Germany
Contact: Wells
Telephone: 004916098658323
E-Mail: info@apex-ce.com
Technical Support
BrosTrend Wi-Fi Products Technical Support Team
www.brostrend.com
24/7 Hours Technical Support Email:
support@brostrend.com

Documents / Resources

| BrosTrend AC1200 Dual Band WiFi Extender [pdf] Installation Guide
AC1200 Dual Band WiFi Extender, AC1200, Dual Band WiFi Extender, Band WiFi Extender, WiFi Extender, Extender
---|---