BrosTrend P1 2.5 Gigabit PCIe Network Adapter Installation Guide
- June 14, 2024
- BrosTrend
Table of Contents
BrosTrend P1 2.5 Gigabit PCIe Network Adapter
Hardware Connection
-
Turn off your computer, unplug the power cable and remove the case panel.
Note: DO NOT insert the adapter while your computer is powered on
-
Locate an available PCl-e slot and insert the adapter.
Note : If the metal bracket is not suitable for your computer, please detach it from the adapter’s board and replace it with the low-profile bracket from the package. -
Put back the case panel, plug in the power cable and turn on your computer.
Driver Installation
- Insert the CD
- You will be directed to the Installation Interface. Choose your operating system and follow theinstructions to complete the installation.
- If the interface does not pop up, please open the driver folder (named Driver & Manual) via This PC.
- Connect the Ethernet cable to the adapter. Now you can enjoy the blazing-fast 2.5Gbps speed for lag-freegaming, 4K streaming, NAS connection and data transmission.
LED Indicator
LED
Indicator
| Status
---|---
2.5G
| -On: The adapter speed is negotiated at 2.5Gbps, but no data activity.
-Blinking: The adapter is working at 2.5Gbps.
-Off: No link or the adapter is working at a different speed.
1000M
| -On: The adapter speed is negotiated at lGbps, but no data activity.
-Blinking: The adapter is working at lGbps.
-Off: No link or the adapter is working at a different speed.
100/l0M
| -On: The adapter speed is negotiated at l00M/l0Mbps, but no data activity.
-Blinking: The adapter is working at l00Mbps or lOMbps.
-Off: No link or the adapter is working at a different speed.
Note: If neither LED flashes, check whether the adapter is detected by your computer or the driver is installed successfully.
FAQ
Ql: What should I do if I can’t run the CD?
- You can download the driver at https://www.brostrend.com/pages/download-center
Q2: What should I do if my computer cannot find the adapter?
- Restart your computer and try again.
- Power off your computer and then reinsert the adapter or try another PCl-e slot.
- Make sure you have installed the correct driver.
- If the problem persists, please contact us at support@brostrend.com
Related Product Introduction
In order to have optimal 2.SGbps connection when usingthis adapter, you can purchase a BrosTrend 8-Port 2.5G Multi-Gigabit Ethernet Switch. Please visit the link or scan the QR Code below: https://www.brostrend.com/products/8-port-2-5g-mu1tigigabit- ethernet-switch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>