JEWHUN TH2000 LED Rechargeable Bike Light Instruction Manual
- May 15, 2024
- JEWHUN
Table of Contents
JEWHUN TH2000 LED Rechargeable Bike Light
Name of each part
Product Specifications
Model No. | TH2000 |
---|---|
Material | Aluminum Alloy |
Bulb | 6XTE LED (Bulb color light”‘3 Daylight cob: light3) |
Built-in Battery | 10000mAh (21700 lithium battery*2) |
Main bodyweight | 199g(including battery) |
Size | 1034839mm |
ChHgi.ng Tune | 2-6 hours |
Waterproof level | IP65 |
Charging connection port | Type-C USB |
Set contents | Light body, bracket, dedicated charging cable, Japanese |
instruction manual
::The specifications and design of this product are subject to change without
notice.
Also, weight and other specifications are subject to error.
Precautions for use
- How to care
If the lamp body of this product gets dirty, wipe it clean with a cloth moistened with water. Do not use thinner or alcohol. It 1nay cause defounation or 1uaJfunction.
- Storage method
- Store in a dry, well-ventilated place (0-30° C) that is not exposed to ra111, dew, dust, direct sunlight, ultraviolet rays, salt damage, high temperature, or high humidity.
- If the product will not be used for an extended period of time (six 1nonths or n1ore), store it with a fully charged battery. If the batteries are left in a state of natural discharge for an extended period of ti1ne, the voltage may drop and they may become unusable.
- To n1aintain the performance of rechargeable batte1ies, charge-discharge them once every three months.
- Keep out of the reach of children.
Safety Precautions (Please read)
Warning | The contents could result in death or serious injury. |
---|
- Please strictly adhere to the downward irradiation angle to avoid dazzling oncoming vehicles (persons).
- Before driving, make sure that the main body of the light is securely attached to the bracket and that the light illuminates.
- Charging the battery for a long period of time may cause it to heat up. lf you hear unusual noises or the main unit becomes hot during use, stop using it immediately.
- Do not charge the battery for more than 8 hours as it may be overcharged.
- Do not subject this product to shock. disassembly. modification. or replacement of the built-in battery, as this may result in overheating or damage.
- Do not use this product in heavy rain or underwater. If water gets ins ide the main unit, it may cause short circuit or insulation failure resulling in heat generation, electric shock, or malfunction .
Warning| The contents of the policy may result in minor injury or damage
to property.
---|---
- Do not touch the light part while the light is on. Doing so may cause burns.
- Do not look directly at the LED light part while it is lit. Doing so may damage your eyes.
- Flashing mode is for auxiliary light use only. Do not use the flashing mode during normal driving.
- Do not charge, discharge, or store the batteries in high temperature conditions. [t may cause deterioration of the rechargeable batte ry.
- Please follow the correct care and storage instructions.
- T he built-in battery is not replaceable.
How to use
- Installation method
- **Remove the screws,
**
-
Insert the bracket into the handle.
-
Tighten me screws firmly and check the bracket stability.
-
**Put on the light.
**
*When attaching or detaching the main unit, be sure to slide it horizontally.
Mode conversion:
-
I. Press the switch once from the off state to switch the mode as shown below.
Far light mode adjustment button (daylight color•1) Near light mode adjustment button (light bulb color’2)
*From any mode, press and hold the switch for about 1.5 seconds to tum it off. -
Double-click any of the adjustment buttons to switch to 3-light mode (far-+- near). Pressing once again switches the mode as shown below.
-
Light mode(far light + near light)
How to charge
Charge the battery with the included Type-C USB cord, Charging time ill 3-4
hours.
Type-C port : for charging the bicycle light (Figure – (i))
A port: For supplying power to external devices (Figure -2)
l::Standard charging time and lighting time are estimates and may vary depending (}(I the environment in which they are used.
Power indication in use
LED display shows battery level in real time.
It provides an intuitive and clear understanding of the battery status.
*The light cannot be turned on while the battery is charging.
Bicycle Light (TH2000) Warranty
This document promises that if a failure occurs during the following period from the date of purchase, the product will be repaired free of charge in accordance with the details described on the reverse side of this document. The purpose of use of your person& information is described in this document. If you have any questions about your personal information, please contact your dealer. For details, please refer to the reverse side of this document.
Model No. | TH2000 |
---|---|
Warranty period | I year from the date of purchase |
Date of purchase | Year Month Day |
Customer | Order No. |
Your address
Your name
phone ( )
Sales Store| !Address/Sales store name :
Phone ( )
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>