HIDE-A-LITE 4158535 LED Strip 24V IP67 Midlum Instruction Manual

: May 15, 2024
: HIDE-A-LITE

Table of Contents

HIDE-A-LITE 4158535 LED Strip 24V IP67 Midlum
Specifications
Product Usage Instructions
FAQ
DIMENSION
BOX CONTENT
SAFETY INSTRUCTIONS
SPECIFICATON
Installation & Safety Instructions
Installation
ABOUT COMPANY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HIDE-A-LITE 4158535 LED Strip 24V IP67 Midlum

HIDE-A-LITE-4158535-LED-Strip-24V-IP67-Midlum-FIG-1

Specifications

Product: LEDstrip 24V IP67 Midlum
Lengths Available: 5m, 10m
LED Color Temperature Options: 2700K, 3000K, 4000K
Number of LEDs per meter: 168pcs
Maximum Output per meter: 9.6W
Voltage: DC 24V
IP Rating: IP67
Safety Class: III

Product Usage Instructions

Safety Instructions:
Before installation, read and understand the safety instructions provided in the manual. The luminaire should be installed by a licensed electrician following local regulations. Always disconnect power before installation or maintenance.

Installation Guidelines:
Follow the provided instructions carefully for safe and correct installation. Ensure that the drive unit matches the specifications of the LEDstrip. Pay attention to the maximum recommended ambient temperature to maintain the lifespan of the product.

Installation Tips:

Use the included clips for permanent installation.
When installing in profiles, consider using heat-resistant silicone for durability.
Avoid applying silicone directly on the LED chip; instead, apply it along the sides.

Additional Recommendations:
It is recommended to check for suitable profiles at www.hidealite.com and follow the bending radius guidelines for optimal installation. Any changes to specifications will be updated on the website.

FAQ

Can I cut the LEDstrip to a custom length?
The LEDstrip is available in standard lengths of 5m and 10m and should not be cut as it may affect performance.
What is the IP rating of the LEDstrip?
The LEDstrip has an IP67 rating, making it suitable for outdoor use and protection against dust and water immersion.
Can I install the LEDstrip myself?
It is recommended to have the LEDstrip installed by a licensed electrician to ensure safety and compliance with local regulations.

DIMENSION

HIDE-A-LITE-4158535-LED-Strip-24V-IP67-Midlum-FIG-2

BOX CONTENT

SAFETY INSTRUCTIONS

Read these instructions carefully before commencing installation and retain for future reference. The luminaire should be installed by a licensed electrician and in accordance with local regulations. Make sure that the power is off before installation or maintenance.

SPECIFICATON

E-nr| Snro| El.nr| GTIN| Length| Max.Length| LED color| LED/m| Output max/m| Voltage DC
---|---|---|---|---|---|---|---|---|---
7509844| 4158535| 3227695| 7392971149684| 5m| 10m| 2700K| 168pcs| 9,6W| 24V
7509845| 4158536| 3227696| 7392971149691| rm| 10m| 2700K| 168pcs| 9,6W| 24V
7509846| 4158537| 3227697| 7392971149707| 5m| 10m| 3000K| 168pcs| 9,6W| 24V
7509847| 4158538| 3227698| 7392971149714| rm| 10m| 3000K| 168pcs| 9,6W| 24V
7509848*| 4158539| 3217595| 7392971149721| 5m| 10m| 4000K| 168pcs| 9,6W| 24V
7509849| 4158540| 3217596| 7392971149738| rm| 10m| 4000K| 168pcs| 9,6W| 24V

Installation & Safety Instructions

The installation should be performed by a qualified electrician.
See the table of technical specifications and follow the instructions to perform the installation in a safe and correct manner; note the recommendations for maximum lengths.
Make sure that the LEDstrip’s voltage corresponds with that of the drive unit and ensure that the polarity is correct.
When two or more LEDstrips are interconnected, make sure the maximum recommended length is not exceeded.
Make sure the power is switched off during installation and that the LEDstrips do not overlap to avoid overheating.
It is important that the LED luminaire’s maximum specified ambient temperature is taken into consideration in order to guarantee its life span, if this is exceeded, the life span can be shortened drastically.
Use the recommended/approved assembly fittings to ensure the lifespan of the LEDstrip.
The LEDstrip must not be switched on when rolled up.
LEDs are sensitive components and must be treated with care and not subjected to mechanical stress.
The flexible LEDstrip must not be bent more than the recommended bending radius.
The LED chip should not be exposed to direct sunlight when switched on.
The self-adhesive tape is provide for easy installation. Use the supplied clips for permanent installation. When installed in the profiles (not uplight) recommends heat-resistant silicone for a permanent and sustainable installation. Do not apply silicone directly on the LED chip but along the sides.