Set Up With Vicohome App User Guide
- May 15, 2024
- VICOHOME
Table of Contents
Set Up With Vicohome App
User Guide
https://www.vicohome.io/download/
Download Vicohome App from App Store or Google Play. You can also download the App by scanning the QR code above with the QR code scanner in your smartphone
Pair the camera to your Phone App
Note: Before installing your bird feeder and camera, please setup your
camera first.
Set up the camera
Step 1: Go to your App Store or Google Play on your smartphone, search
for “Vicohome” Or just scan the QR code below to download the app:
https://www.vicohome.io/download/
Then please sign up for a new account, please check the screenshot below for your reference:
- Tap “Sign up for a new account”
- Input your user name, your country “the United State” , and your E-mail address. And then check on the “Agreement and Privacy policy Let’s go to “Next Step”.
- You will receive the Verification Code from your E-mail, put it in and then go to “Next Step” .
- Set password for your account, and then go to “Done”.
- Congratulations ! You have already registered successfully. Let’s tap the “+” icon to add the camera now!
Step2:
Hold the power button to power up the camera, the indicator light will keep
blue. And finally you will hear the pairing sound from the camera, which means
that the camera is ready for connection.
- If you hear the sound from the camera, please go to “Next Step”.
- The device is found, please tap the device at this page.
- Connect WIFI to the camera, select your network and input your WIFI password.
- Tap “Join” , please.
- wait for a second, you will see this page and the camera would say “WIFI connected” . You’re almost done.
- Set a name for the device and go to “Next Step”.
- Check your WIFI signal strength, tap “Done”.
- Here we go! tap the “play” icon, you will see the camera image.
About Cloud Storage and Bird Fans Plan
How to get 30 days of free cloud storage to start the Bird Fans Plan (QR code
valid within half an hour) 
Share the camera with others
Step1:
The invitee needs to download the Vicohome APP on her/his smartphone.
Step2:
After installing and registering a new account to login, just go to the app
homepage, tap onthe “+” sign in the upper right corner, and then select “Add
friend’s device” . Then please scan the QR code of device admin.
How to find the device admin QR code?
See the screenshot below. Just go to the administrator’s Vicohome app. Go to
the settings icon > Share > Device Sharing then you will see the QR code.
Al Recognition
A bird came to the bird feeder and triggered the camera recording and Al
recognition. 