PHILIPS JSY2300437 Indoor Device User Manual
- June 17, 2024
- Philips
Table of Contents
PHILIPS JSY2300437 Indoor Device
Specifications:
- Dimensions: 400 mm x 100 mm x 60 mm
- Weight: 420mm
Product Information:
Thank you for choosing Philips Hue! This device is designed to provide you
with a seamless lighting experience. Please read the following instructions
carefully to ensure safe and proper usage of your Philips Hue product.
Usage Instructions
Indoor Use Only:
The Philips Hue indoor devices are intended for indoor use only. Do not use
them in wet locations or areas directly exposed to water. Ensure proper
installation in a residential setting.
Battery Instructions:
- Use only the specified types of batteries and do not mix new and used batteries.
- Insert batteries with the correct polarity to avoid damage to the device.
- Remove exhausted batteries from the product promptly.
- Do not short-circuit the supply terminals.
Safety Precautions:
- Keep the device away from liquids and humidity.
- Switch off the power before conducting installation, maintenance, or service activities.
- Avoid strangulation hazards by keeping wiring out of reach of children or securely fixed to the wall.
Disposal Instructions: Dispose of the old device in accordance with the
disposal laws in your area. Do not throw batteries away with normal household
waste.
Philips Hue Secure Camera:
- Remove batteries when discarding the product.
- A Philips Hue account is required for Philips Hue Secure.
- Some features may require a paid subscription.
Thank you for purchasing this Philips Hue device, we highly appreciate your choice for the Philips Hue brand and wish you lots of pleasure using your product device. Please go to www.philips-hue.com to learn more about Philips Hue and how to use it.
- Using Philips Hue requires acceptance of the Philips Hue Terms of Use as available on www.philips-hue.com (go to “Product Terms of use” in the footer).
- Philips Hue Secure requires a Philips Hue account. Some features require a paid subscription.
- Visit www.philips-hue.com/secureplans for more information.
- This device complies with Part 15 of the FCC Rules and with RSS of Industry Canada.
- Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- The advanced interface module complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment.
- This device should be installed and operated with a minimum distance of 8″or 20cm between the radiator and your body.
- This Class B digital device complies with Canadian ICES-003.
NOTICE: Changes or modifications made to this device not expressly approved by Signify North America Corporation (“Signify””) may void the U.S. FCC and Canadian authorization to operate this device. This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- – Reorient or relocate the receiving antenna.
- – Increase the separation between the device and receiver.
- – If applicable, connect the device into an outlet on a circuit different from that to which the receiver is connected.
- – Consult the dealer or an experienced radio/television technician for help.
LIMITED WARRANTY
Signify warrants that this device’s hardware components will be free from
defects in material and workmanship for a period of two (2) years from the
date of purchase, unless a different period is stated on the packaging of the
device (the “Warranty Period”).
Notwithstanding the foregoing, the Warranty Period for all Energy Starcertied
devices is three (3) years from the date of purchase. This limited warranty
only applies to the hardware warranty period applicable in the country where
you purchased the product) against the warranty conditions of the country
where you request such warranty service.
WARNINGS AND CAUTIONS
- Always follow the following instructions to ensure correct and safe installation and functioning of your devices.
- Always switch off the power from your device prior to installation, maintance or service activities.
- This device is for residential use only.
- Devices with magnets may interfere with pacemakers or other medical implants.
- This device is not a toy designed to be played with by children.
- Keep away from young children.
- Do not place on hot surfaces.
- Do not place on a thick rug or carpet.
- For safety reasons and under the terms of the warranty, none of the enclosed devices should be opened. Installing the device at a height: stand on sturdy surfaces and use caution in climbing.
- Use anti-drop cable when installed above 7 feet (2 meter)
- Consider the expectations of privacy of members of your household as well as third parties. The user is responsible for complying with privacy and other laws and regulations applicable – see the “Philips Hue Terms of Use”
WARNINGS AND CAUTIONS for Philps Hue indoor devices
- The indoor device is for indoor use only. Do not use in wet locations, areas directly exposed to water or outdoors.
- Keep away from liquids and humidity.
EXTRA WARNINGS AND CAUTIONS for Philips Hue Secure camera
- Strangulation hazard: Keep the wiring out of arm’s reach of young children or fixed effectively to the wall. Strong magnets! If you have a pacemaker or other implanted medical device, maintain a safe distance. Keep magnets away from electronic devices.
- Only use or charge the device with the included adaptor. Adaptor only for indoor use.
- Do not charge the product in direct sunlight.
- The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Warning : Exposure at close distance when the alarm of the camera is sounding may be harmful to your hearing.
Extra warnings and cautions for the Philips Hue Contact sensor Small parts (magnets): Keep out of reach from children under 36 months
WARNINGS AND CAUTIONS FOR DEVICES USING BATTERIES
- Risk of explosion if the battery is replaced by an incorrect replacement.
- Batteries should be installed by an adult.
- Different types of batteries and new and used batteries must not be mixed.
- Batteries are to be inserted with the correct polarity. The supply terminals must not be short-circuited. Exhausted batteries must be removed from the product. Non-rechargeable batteries must not be charged. Disposal of your old device:
- Manage in accordance with disposal laws in your area. Remove the batteries when you discard the product. Do not throw the batteries away with normal household waste.
- They must be handed in at an official collection point or at a Philips Hue dealer, both of which will dispose of the batteries in an environmentally friendly way.
WARNINGS AND CAUTIONS FOR PRODUCTS USING COIN/BUTTON BATTERIES:
CAUTION! Do not ingest battery – Chemical burn hazard. Keep new and used
batteries away from children.
- If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death.
- If you think that batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
Safety Instructions for products with separate power supply unit:
- Only use the supplied power supply unit.
- The device can be damaged when using a power supply unit of another manufacturer.
- Do not open the power supply unit for your own safety.
EXTRA WARNINGS AND CAUTIONS for Philips Hue Secure Lily camera spike
- Keep out of reach of small children and pets.
- Install in solid ground.
- Keep away from water: keep at least 3 feet / 1m from pools, ponds or spas..
WIRELESS SPECIFICATIONS for all Philips Hue products
- Wireless RF mode frequency band: 2,400-2,485.5 MHz Operating channels Zigbee: channels 11-26 Operating channels Bluetooth: channels 0-39 Operating channels WIFI: channels 1-11
- Maximum transmitted power <20 dBm
EXTRA WIRELESS SPECIFICATIONS for
- Philips Hue Secure contact sensor
- Range: 40ft (12 m) indoor.
- Installing on or near metal surfaces may lead to reduced range.
- EXTRA WIRELESS SPECIFICATIONS for
- Philips Hue Secure camera
- Wireless RF mode frequency band: 5,150-5,850 MHz
ENVIRONMENTAL SPECIFICATIONS for
- Philips Hue Secure products
- Operation temperature: -4…113˚F (-20…45˚C) Storage temperature (sensor): -40…70˚C
- Storage temperature (wired camera): -40…70˚C Storage temperature (battery camera): -20…60˚C Relative humidity (operation): 5-95%
- Relative humidity (storage): 0-90%
CLEANING AND MAINTENANCE
- Do not clean the device when it is on and connected to the power supply.
- To avoid scratching the device, clean it only with a soft dry cloth.
- Do not use cleaning agents to clean the device.
- The product is ZigBee certified. Zigbee is an open standard for indoor wireless communication. All Philips Hue ZigBee Certified products can be connected with other Philips Hue ZigBee Certi?ed products.
- Bluetooth® enabled product. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Signify is under license.
- Hue Personal Wireless Lighting is a trademark owned by Signify Holding B.V.
- Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
- Other trademarks and trade names are those of their respective owners.
CUSTOMER SUPPORT
- For more information, please visit our website at
- www.philips-hue.com/support, or call our customer service (1-800-555-0050).
Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807, USA Signify Canada Ltd./Signify Canada Ltée. 281 Hillmount Road, Markham, ON, Canada L6C 2S3
Questions or Comments l Questions ou commentaires:
800-555-0050 Importado y/o distribuido en México por: Signify Mexico S.A. De C.V. Av. La Palma No. 6, La Herradura, Huixquilucan, Edo de México, C.P. 52784, México R.F.C. PME-620620-E84 Centro de contact:800-508-9000
© 2023 Signify Holding All rights reserved
FAQ
Q: How do I access warranty service for my Philips Hue product?
A: To request warranty service, please contact us at our toll-free number
1-800-555-0050 or refer to the address
indicated on the packaging for further instructions on returning the device.
Q: Where can I learn more about Philips Hue and its usage?
A: Visit www.philips-hue.com for detailed
information on Philips Hue products and how to use them effectively.
References
- Home security plans | Philips Hue UK
- Home – Aire Global
- Smart lighting | Philips Hue
- End of Support Policy | Philips Hue US
- Home security plans | Philips Hue US
- Philips Hue Support - FAQs | Philips Hue US
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>