COSTWAY CB10483 Remote Control Instructions
- June 17, 2024
- COSTWAY
Table of Contents
COSTWAY CB10483 Remote Control
Product Information
Specifications:
- Number of Modes: 358
- Color Options: RGB
- Control: Remote Control
- LED Pixel Points: Adjustable
Product Usage Instructions
Power On/Off and Speed Adjustment:
To power on/off the device and adjust the speed, use the corresponding buttons on the remote control.
Mode Selection:
Use the Mode- and Mode+ buttons to cycle through the 358 available modes.
Brightness Adjustment:
Adjust the brightness using the Brightness- and Brightness+ buttons on the remote control.
Remote Control ID Matching:
To match the remote control to the LED strip, long press the remote control button for 5 seconds. The LED strip will indicate successful matching or cancellation with specific color flashes.
Single Cycle Play:
In automatic playback mode, press the Set button once and then press the lock button to capture and loop play the current effect.
Color Effects and Testing:
Short press to auto play 358 kinds of effects. Long press for 5 seconds to enter the RGB colorful jump effect for LED strip testing.
RGB Order Adjustment:
To adjust the number of LED pixel points and the RGB order, long press for 5 seconds to enter the setup menu. Use Mode+ and Mode- buttons to adjust LED pixel points. Press B button to adjust RGB sequence.
Static Monochrome Mode:
Switch to static monochrome mode for a fixed color display.
Frequently Asked Questions
-
Q: How do I reset the LED strip back to default settings?
A: To reset the LED strip, power off the device, wait for a few seconds, and then power it back on. The LED strip should revert to its default settings. -
Q: Can I control multiple LED strips with one remote control?
A: Yes, you can match multiple LED strips to one remote control by following the ID matching process for each LED strip individually.