COSTWAY HU10441 Wardrobe Cabinet with Hanging Rod Installation Guide

COSTWAY HU10441 Wardrobe Cabinet with Hanging Rod

Specifications

• Model: HU10441
• Product Name: Armario Ropero con Barra para Colgar Armadio con Asta Sospesa
• Includes: Upper support rod, Hanging bar, Bottom shelf, Middle adjustable shelf, Adjustable buckle, Anchor, Self-tapping screw

Before You Start
Before assembling the product, please ensure you have read the instruction booklet provided. Sort and check all parts to ensure the set is complete. Make sure to assemble the product as close as possible to its final location to avoid unnecessary moving. Place the product on a flat and stable surface away from children.

Assembly Steps

1. Start by assembling the frame according to the provided instructions.
2. Attach the upper support rod, hanging bar, and bottom shelf to the frame.
3. Install the middle adjustable shelf and adjustable buckle as indicated in the manual.
4. Secure the anchor and self-tapping screws in place.
5. Follow step-by-step instructions for inserting the back panel.

Return / Damage Claim Instructions
If you need to return the product or file a damage claim, do not discard the original packaging. The item must be returned in the original box for acceptance. Take photos of box markings and any damaged parts. Email the images along with a description of your claim directly to the respective customer service email provided based on your region.

Frequently Asked Questions (FAQ)

1. What should I do if I’m missing a part?
   If you are missing a part, take a photo of the box markings and contact customer service via email with the image for assistance in receiving the correct replacement part.

2. Can I assemble the product alone?
   While it is recommended to have assistance during assembly, one person can assemble the product following the provided instructions carefully.

Installation

If you’re having difficulty, our friendly customer team is always here to help.

• USA: cs.us@costway.com
• AUS: cs.au@costway.com
• GBR: cs.uk@costway.com
• ITA: cs.it@costway.com
• POL: sklep@costway.com
• DEU: cs.de@costway.com
• FRA: cs.fr@costway.com
• ESP: cs.es@costway.com

Before You Start

• Please read all instructions carefully.
• Retain instructions for future reference.
• Separate and count all parts and hardware.
• Read through each step carefully and follow the proper order.
• We recommend that, where possible, all items are assembled near to the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Always place the product on a flat, steady and stable surface.
• Keep all small parts and packaging materials for this product away from babies and children as they potentially pose a serious choking hazard.

1. Step 1: Lay the Main frame(Part 1  ) on the floor so that you have 1 access to the base of the rack

2. Step 2: Take the Caster(Part 11) and screw it into the Main frame feet in a clockwise direction by using the wrench. Be sure to screw all the way until it is tight.
   

3. Step 3: Push the pin on the left and right sides of the Upper support 4 rod(Part 4 ) into the round hole on the top of the main frame at the same time, and then press down.

4. Step 4: Repeat Step 3 for the Lower support rod (Part 3 ). Please 3 note that the Lower support rod has 2 convex pins, the convex pins should face upward when installing.

5. Step 5: Install the Bottom shelf (Part 6 ) on the frame by lining up 6 the groove to the bottom wire of frame and pressing firmly.

6. Step 6: Install adjustable buckle (Part 10  ) into the hole of the mainframe and press it down. Four adjustable buckles need to be installed at the same height.

7. Step 7: Install Middle adjustable shelf (Part 7 ).  The hole at the bottom of the shelf should be aligned with the adjustable buckle and inserted.

8. Step 8: Insert the back panel into the U-channel at the back.

9. Step 9: Install Hanging bar(Part 5 ) on the top wire of the main 5 frame, it needs to be installed according to the view direction.
   

10. Step10: Install the T 8op shelf (Part 8 ) on the frame by lining up the groove to the bottom wire of frame and pressing firmly.

11. Step11: Screw through the corresponding hole position of the front door and use Philip key to install the handle in front of the front door.
    

12. Step12:Insert the Convex pin of Lower support rod(Part ) into 3 the hole at the bottom of the Front door (Part ), and then press 2 and hold the tab pin at the top of the front door to insert it into the hole of Upper support rod(Part ). 4
    

13. Step13: Tear off the adhesive film of Anti-collision Corner and stick it on the four corners at the top of the cabinet.
    

Description of gap adjustment at the top of the door frame: the casters need to be adjusted according to the actual situation. When the left door is lower, the left casters should be adjusted higher, and so on.

Return

• DO NOT discard the box / original packaging.
• In case a return is required, the item must be returned in original box. Without this your return will not be accepted.
• Take a photo of the box markings.
• A photo of the markings (text) on the side of the box is required in case a part is needed for replacement. This helps our staff identify your product number to ensure you receive the correct parts.
• Take a photo of the damaged part (if applicable).
• A photo of the damage is always required to file a claim and get your replacement or refund processed quickly. Please make sure you have the box even if it is damaged.
• Send us an email with the images requested.
• Email us directly from market place where your item was purchased with the attached images and a description of your claim.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>