Sokply B Series LED Explosion Proof Light Instruction Manual

Sokply B Series LED Explosion Proof Light

Product Information

Specifications

• Model: B Series LED Explosion Proof Light
• Certifications: UL844, Class I Division 2, NEMA 4X, ABS
• Materials: Housing – Copper-free aluminum, Lens – Tempered glass, Hardware – Stainless steel
• IP Rating: IP66

Product Usage Instructions

Mounting Methods

Ceiling Mounting:

1. Take the fixture and accessory out from the carton box, tighten 2x angle holder screws.
2. Install and tighten the flexible metal conduit with the fixture.
3. Drill 2x holes in the ceiling, fixing 10 expanded screws and bracket on the ceiling.
4. Connect black cable to L, white cable to N, and green cable to grounding.

Wall Mounting:

1. Take the fixture and accessory out from the carton box, tighten 2x angle holder screws.

Pole Pendant:

Ensure the length fits between the pole and driver box more than 22mm for safety.

Frequently Asked Questions

Q: What are the certifications for the B Series LED Explosion Proof Light?

A: The certifications include UL844, Class I Division 2, NEMA 4X, and ABS.

Q: Can a globe be used with all models in the B Series?

A: The globe is optional for B, B2, B3 models but not available for B4.

Q: What materials are used in the construction of the light?

A: The housing is made of copper-free aluminum, and the lens is tempered glass. The hardware includes stainless steel components.

LED Explosion Proof Light

Without globe

Certifications

• Marking ATEX
  • II 3 G Ex ec IIC T6…T3 Gc
  • II 2 D Ex tb IIIC T85°C…T100°C Db
  • II 2 G Ex eb mb IIC T5…T6 Gb
  • II 2 D Ex tb IIIC T80°C…T100°C Db
• Marking IECEx
  • Ex ec IIC T6…T3 Gc
  • Ex tb IIIC T85°C…T100°C Db
  • Ex eb mb IIC T5…T6 Gb
  • Ex tb IIIC T80°C…T100°C Db
• Marking UL844 (North American)
  • Class I, Division 2, Groups A, B, C, D
  • Class II, Division 1, Groups E, F, G
  • Class II, Division 2, Groups F, G
  • Class III
• Marine Marking
  • NEMA 4X
  • UL1598A
  • ABS
  • IP66
• Standard Materials:
  • Housing: Copper-free aluminum
  • Lens: Tempered glass
  • Hardware: Stainless steel
  • Mounting Bracket: Stainless steel

Key Features

1. Dimmable and battery backup function is available.
2. High-quality SMT LED and Meanwell driver.
3. Heavy-duty and high impact resistance.
4. Replaceable LED board and drivers.
5. Integrated junction box for driver.
6. Marine rating powder coated finish treatment.
7. Various installation ways for different applications.
8. Glass lens or polycarbonate lens for making different beam angles.
9. 5-year warranty.
10. Low temperature applications to -40°C (-40°F) and high temperature up to 55°C (131°F).

Technical Data

Dimensions

Photometry

Packing Information

Mounting Methods

Ceiling Mounting

WARNING
Risk of fire, Electric shock or personal injury Before installation, turn off power!

1. Take the fixture and accessory out from carton box,

2. Install and ghten flexible metal conduit with the fixture.

3. Drill 2x hole as shown in Fig.2, the distance can be 91~140mm, fixing ∅10 expanded crews and bracket on ceiling.

4. Connect black cable to L, Connect White cable to N, Connect green cable to grounding.
   

5. Adjust the beam angle from 0-180°.

Wall Mounting

1. Take the fixture and accessory out from carton box, 2x angle holder screw as Fig.1.
2. Install and ghten flexible metal conduit with the fixture.
3. Drill 2x hole as Shown in Fig.2, the distance can be 91~140mm, fixing ∅10 expansion screws and bracket on ceiling.
4. Connect black cable to L, Connect White cable to N, Connect green cable to grounding.
   

Pole Pendant

1. Take the fixture and pole accessory out from carton box, ghten pole as shown in Fig.1.
2. Connect black cable to L, Connect White cable to N, Connect green
3. Drill 4x Ø10mm holes, as 100mm distance, install the junction box to the wall or ceiling as shown in Fig.3, ghten the pole to the box, and adjust the chain of balance.
4. Adjustable pole installation. With this adjustable kit, you can Make any light distribution direct as you want. Optional: Install the fixture to the long pole after cable connecting cable.

Hook Pendant

1. Take the fixture and accessory out from carton box, tighten 2x angle holder screw as Fig.1.
2. Tighten the hook with the fixture, at least 6x teeth need to be ghten, fix the M3 screw to prevent the hook loosening.
3. Drill 1 expansion screw hole and install it, and hang the chain as shown in Fig.3.
4.  Connect black cable to L, Connect White cable to N, Connect green cable to grounding.

Ceiling Mounting by Oppening Driver Box

• This installation method is only for Model B. It can not be applied on Model B2, B3, and B4 because they are too heavy.
• Only one electrician is required for this installation.

1. Install the junc on box to ceiling the via 4x expansion bolts, ghten the junction on box cover screws by 5# allen key.
2. Install the 3/4″ NPT adapter through the cable to the hole of adaptor tighten the driver enclosure cover to adaptor via M4 screw to prevent loosening.
3. Connect black cable to L, Connect White cable to N, Connect green cable to grounding.
4. Tighten 3x M8 screws for driver enclosure as shown above.

Arm Mounting by Oppening Driver Box

• This installation method is only for Model B. It can not be applied on Model B2, B3, and B4 because they are too heavy.
• Only one electrician is required for this installation.

1. Install the 3/4″ NPT adapter through the cable to the hole of adaptor, ghten the driver enclosure cover to adaptor via M4 screw to prevent loosening.
2. Hang the luminaire to the back cover.
3. Connect black cable to L, Connect White cable to N, Connect green cable to grounding.
4. Tighten 3x M8 screws for driver enclosure as shown above.
   

Arm Mounting by Opening Driver Box

• This installation method is only for Model B. It can not be applied on Model B2, B3, and B4 because they are too heavy.
• Only one electrician is required for this installation.

1. Install the 3/4″ NPT adapter through the cable to the hole of adaptor ghten the driver enclosure cover to adaptor via M4 screw to prevent loosening.
2. Hang the luminaire to the back cover.
3. Connect black cable to L, Connect White cable to N, Connect green cable to grounding.
4. Tighten 3x M8 screws for driver enclosure as shown above.
   

Stanchion Mounting

1. Tighten part 2 and assembly 1, and fix the M3 screw, install, the arm to the adaptor, tighten the M10 via 8# Allen key.
2. Install the pole fi er with arm via 4x M8 screws, the max suitable pole diameter 50mm, the Alterna ve 25 degrees pole fitter.
3. Contact the cable to AC wire, black one contact to live wire, white one contact to null wire, green one contact to grounding.
4. Slip the fitter to the lamppost and tighten M8 inner hexagonal screw.

Wall Mounting to Junction Box

1. Tighten part 2 and assembly 1, and fix the M3 screw,install arm to the adaptor, tighten the M10 via 8# Allen key.
2. Drill 4x Ø10mm holes Install the junction box to the wall via M10 expanded screw.
3. Contact the AC wire to power system, black one to Live wire, white one to the Null wire, green one to the grounding.
4. Tighten 6 x screws between arm and junction box, turn on the power to test the luminaires is work.

Accessories

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>