SOKPLY 8232 LED Vapor Proof Light Fixture Instruction Manual

June 15, 2024
Sokply

LED Surface Mounted Luminaire

8232 LED Vapor Proof Light Fixture

Product APPlicAtions

| SOKPLY 8232 LED Vapor Proof Light Fixture - Symbol 2| SOKPLY 8232 LED Vapor Proof Light Fixture - Symbol
3
---|---|---
retails & supermarkets| Hotels & restaurants| commercial Buildings
| |
offices and showrooms| schools & colleges|

Installation diagram
These instructions should be read carefully and retained after installation for further reference and maintenance.

SAFETY:

  1. Please read the specification first, to make sure the service environment matches the condition in the specification before using.
  2. Make sure the switch of product is off before connecting to the power supply to prevent electric shock.
  3. Operation against rules of product is off before connect to the power supply to your personal safety.
  4. Dangerous high voltage, Non-professionals are not allowed to maintain the products.
  5. If the exterior flexible cable is damaged, it must exchange by the supplier, agent or other similar qualified personnel.

WARNING:

  1. Ensure the luminaire is switched off & suitably cooled down before carrying out any maintenance work.
  2. MIN 90 °C SUPPLY CONDUCTORS
  3. SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 40 °C
  4. SUITABLE FOR WET LOCATIONS
  5. All components in the luminaire shall not be replaced or serviced.
  6. THIS PRODUCT MUST BE INSTALLED INACCORDANCE WITH THE APPLICABLE INSTALLATIONS CODE BYA PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
  7. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR

SOKPLY 8232 LED Vapor Proof Light Fixture - Tunable

Surface Mounting

SOKPLY 8232 LED Vapor Proof Light Fixture - Surface

Suspension

SOKPLY 8232 LED Vapor Proof Light Fixture - Suspension

  1. Check the suspension cable and screws.
  2. Mark the bracket install hole’s position on the wall. The distance is 280+/-20 mm for 2fT, 830+/-20mm for 4fT,1110+/-20mm for 5fT
  3. Screw the suspension cable on the ceiling
  4. Connect the drive to the electric supply, make sure the switch is off and the L/ GND/N connect correct, Please make sure metal cover to enclose the outlet box. done

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals