HATALKIN Clock Integrated 4 In 1 Wireless Charger User Manual

Clock-Integrated 4-in-1 Wireless Charger
User Manual

Product Introduction

Introducing our cutting-edge 4-in-1 wireless charger, featuring a built-in clock display and a versatile three-level adjustable atmosphere light. This innovative device enables simultaneous wireless charging for your mobile phone, smartwatch, and earphones. Additionally, the lightning interface on the back allows for convenient charging of earphone cases that don’t support wireless charging. With just one cable, all your charging needs are effortlessly met.

Function Description

1. Wireless Charging Zone for Mobile Phones
2. Wireless Charging Zone for Earphones
3. Clock Display Zone
4. Watch Charging Zone
5. Atmosphere Light
6. Clock Settings Button
7. Lightning Charging Port
8. Atmosphere Light Touch Button

Product Parameters

Parameter

Product name| 4-in-1 Wireless Charger
Product Input| 12V/2A,9V/2A
Phone Output| 5W/7.5W/10W/15W(max)
Earbuds Output| 3W(max)
Watch Output| 2W(max)
Product Material| ABS+PC
USB Cable Length| 120mm

LED status

-Single tap for the first level of brightness.
-Double tap for the second level of brightness.
-Triple tap for the third level of brightness.
-Quadruple tap to turn off the atmosphere light.

Compatible Model

-Smart phone
-10W for iphone 12-15 series and the latest models(12/13Mini series requires horizontal charging)
-7.5W for iphone 8-11 series
-10W for Other phones that support QI certification and supports the newly released iPhone models with Wireless charging compatibility.
*Please note that wireless charging may be affected by protective cases thicker than 4mm, and it is important to ensure that there are no magnetic materials, metal objects, or cards in the wireless charging contact area.
-Smart watch
-Only compatible with Apple watch series 2/3/4/5/6/7/8/9/SE/SE2/ ultra 1/2 and the latest release of Apple watch
-Smart Earphones
-Place your wireless charging-enabled AirPods in the designated wireless charging area for earphones at the front. For AirPods that do not support wireless charging, you can charge them using the lightning interface located on the back.
-Supports wireless charging for other compatible earphone cases.

How to use the clock

Time Setting: To switch between 24-hour and 12-hour clock modes, press the “M” button separately.
To set the time, press and hold the “M” button for 5 seconds until the numbers start flashing. Then, use the “+” or “-” buttons to adjust the hours in the 12/24-hour format. Next, press the “M” button again and use the “+” or “-” buttons to set the minutes. The numbers will stop flashing after 10 seconds, indicating that the time has been set.
Alarm Setting: Alarm Time: To set the alarm time, press and hold the “M” button for 5 seconds until the numbers start flashing. Then, lightly press the “M” button twice. Use the “+” or “-” buttons to set the alarm’s hours. Press the “M” button again and use the “+” or “-” buttons to set the alarm’s minutes. The numbers will stop flashing after 10 seconds, confirming that the alarm time has been set.
Alarm Activation: Once you have set the alarm time, you must press and hold the “-” button for 5 seconds until the alarm indicator in the upper right corner remains lit to activate the alarm.
Alarm Deactivation: Press and hold the “-” button until the alarm indicator in the upper right corner disappears to deactivate the alarm.
Snooze Mode: Snooze Time Setting: To set the snooze time, press and hold the “M” button for 5 seconds until the numbers start flashing. Then, press the “M” button four times and use the “+” or “-” buttons to set the snooze time (in minutes). Snooze: When the alarm starts ringing, press the “+” button once to silence the alarm. The alarm indicator in the upper right corner will continue to flash, and the alarm will sound again after the set snooze time has elapsed.
Turn Off Snooze: To turn off snooze mode, press and hold the “-” button when the alarm is ringing until the alarm indicator in the upper right corner stops flashing and remains lit.
In Clock Display Mode: Press the “M” button separately to switch between 24-hour and 12-hour clock modes. Press the “+” button separately to adjust the brightness of the clock display. Press the “-” button separately to adjust the volume of the alarm sound. The clock has a time memory function, so there is no need to reset the time after a power outage.

Common Abnormalities Troubleshooting

-Device does not support wireless charging
-Check if there is any metal/magnetic foreign object between the device and charger
-Check that the protective case of the device is too thick beyond the induction range of the coil: remove the protective case to charge
-Adapter power is not enough or damaged: replace the adapter and data cable
-Magnetic interference of household appliances: re-plug the data cable and change the charging location
-When there are metal objects in the charging area rotation, the charger will automatically identify and power-off protection on.

Frequently Asked Questions

-Why do wireless charging and induction products generate heat when charging?
During the charging process, there will be a certain amount of magnetoelectric conversion loss, and this part of the loss will be converted into heat, causing the phone and the charger to generate heat, which is a normal phenomenon.
Precautions
-The charging coil on the stand supports fast charging (15W/10W/ 7.5W), while the charging coil on the Front base is for regular charging (5W). Please place your phone on the stand for fast charging and your earphones/other phone on the Front base for regular charging.
-Fast charging for the phone and watch is available at normal room temperatures (75℉-82℉). At temperatures between 86℉-93℉, the charging speed for the phone and watch may slow down. If the room temperature exceeds 100℉, the Over Temperature Protection System of the phone and watch may interrupt charging until the temperature cools down. In winter, the charging speed is generally faster compared to summer.
-This charger is designed for indoor use or in dry environments. Avoid using it in high-temperature, high-humidity, statically charged, or strongly magnetic environments.
-For your safety, please refrain from plugging and unplugging the charger with wet hands.
-Keep the charger out of reach of babies and children.
-Do not use the charger if it comes into contact with water or if it becomes stuck with dirt or dust.
-Unauthorized disassembly and repair are strictly prohibited for non-professionals.

WARRANTY CLAIM TERMS & CONDITIONS

– 360 Days warranty from the date of purchase
– No registration is required
– The warranty will cover any defects and loss of performance due to product quality issue Please send an Email stating your order number and the specific problem with your product to kegaftersales@gmail.com , and our support representative will get in touch with you ASAP

Have issues with your product?
Things go wrong sometimes.
But you can easily have our friendly team troubleshoot and fix the issues for you ;
kegaftersales@gmall.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>