Dewolf VP6XXX Mini Pc User Manual
- June 17, 2024
- Dewolf
Table of Contents
Mini Pc
User Manual
Precaution
The motherboard is made up of many sophisticated integrated circuits and other
components that are easily damaged by static electricity, Please read the
manual and prepare the following instructions before installation: Please
confirm that the size of the chassis is consistent with the motherboard
before installation.
Please do not tear up the serial number and agent warranty sticker on the
motherboard before installation, otherwise it will affect standard of product
warranty.
To install or remove the motherboard and other hardware devices, please be
sure to turn off the power before, and removal of power cord from outlet.
When you install other hardware devices to the motherboard socket, make sure
the interface and socket is closely.
Take the motherboard, please try your best to avoid touching the metal
connection parts to avoid short circuits in the line. Take the motherboard,
CPU or when the memory, it is best to wear anti-static bracelet.
If no ESD bracelet, make sure your hands dry, and touch the metal to dissipate
the static charge. Before the boards are not installed, first placed in anti-
static mat or anti-static bags.
When you want to remove the motherboard power supply when the plug from the
socket, make sure that power supply is turned off. In before power on make
sure that the power supply voltage of the voltage value is set in the area of
standard values in make sure all hardware devices before turning on the power
supply cable and the power cord is correctly connected.
Do not let the screw contacts on the motherboard circuit or part to avoid
Board damage or failure.
Please make sure that no screws or metal in or on the motherboard inside the
computer chassis. Do not place the computer in unstable.
Chapter 1: Introduction
1.1 Specification
| Model | N27 |
|---|
Processor
| Intel core i3 1215U
Intel core i5 1235U
Intel core i7 1255U
Chipset| Adopt Intel express chipset
RAM| 2SODDR4(can up to 64G)
Display port| Integrated Intel HD Graphic card, Support 1HDMI,1DP
Expansion port| 1M.2 , support 4G/5G, 1M.2 2230 support WiFi
Storage| 1 M.2 2280 support NVME
Audio| N/A
Network| 4 Intel I225V 2.5G Lan, 210G SFP+, support wake on lan
I /O| 4 RJ-45 , 2 SFP+
1 12V DC input
1 HDMI,1DP,1RJ45 COM, 1 Type C COM
1 USB 3.0, 3USB2.0, 1Type C
1Power switch, 1SIM Slot
1 Power Led, 1 HDD led
Built-in I/O| 1 FP1
1 J2
1 JSATA Port, 1SATA
2 SODIMM
1 CPU_Fan
BIOS| AMI 64M DPI Flash ROM
WDT| Support hardware reset (256 level，0~255 sec)
Power supply| DC-12V
Temp| -20℃～60℃
Humidity| 0～95% relative humidity, non-condensing
Dimension| 19017066 CM
Package Contents
N27 Main Host
Vesa Bracket
Screw Package
1.3 I/O Panel
Chapter 2
2.1 screw holes
Place screws into the holes to secure the motherboard to the chassis .
Place screws into the hold to secure the bottom panel to the chassis .
2.1 Pre-installation precautions
Take note of the following precautions before you install motherboard
components or change any motherboard settings.
- Unplug the power cord from the wall socket before touching any component .
- To avoid damaging the motherboard components due to static electricity, Never place your motherboard directly on the carpet or the like . Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components .
- Hold components by the edges and do not touch the ICs.
- Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component .
Please make sure to disconnect power supply before adding or removing So-DIMMs
or the system components.
Step1. Unlock a SO-DIMM slot by pressing the retaining clips outward.
Step2. Align a SO-DIMM on the slot such that the notch on the
SO-DIMM matches the break on the slot
2.4 Onboard headers and Connectors
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>