Tianjin UNI01 Remote Control Page Turner User Manual

Tianjin UNI01 Remote Control Page Turner

Product Information

• Specifications:
  • Suitable for all kinds of screen e-readers, tablets, and mobile phones
  • Mainly used for e-book page turning
  • Automatic hibernation energy-saving standby mode after 8 minutes of no operation
  • Clip built-in intelligent sleep system
  • Input voltage: USB 5.0V

Product Usage Instructions

• Charging and Activation:
  • Charge the product before initial use if it has been stored for a long time.
  • Press the button on the clip to activate the device before each use.
• Attaching the Clip:
  • Clip the clip to the edge of the screen reading area.
  • Ensure the clip trigger point is clean and close to the screen during use.
• Using the Remote Control:
  • The remote control has two buttons for the forward function only.
  • If the LED does not light up or flashes red, charge the remote control before use.
• Troubleshooting:
  • If the e-reader cannot turn pages:
  • Try different positions and directions on the screen to find a suitable trigger point.
  • If needed, remove the e-reader cover if the total thickness exceeds 11.5mm.
  • Re-match the signal if the remote control cannot control the clip.

FAQs

• Q: What should I do if the clip is not responding?
  • A: Make sure the clip trigger point is clean and close to the screen. Try re-matching the signal with the remote control.
• Q: Can I use a phone charger to charge the device?
  • A: Yes, you can use USB 5.0V phone chargers to charge the device. The indicator light will flash red while charging and go out when fully charged.
• Q: How do I claim the 1-year warranty?
  • A: If you encounter any issues within the first year, contact us through Amazon messaging for a quick resolution or replacement.

PRODUCT DESCRIPTION

• This product is suitable for all kinds of screen e-readers, tablets and mobile phones.
• It is mainly used for e-book page turning.

PRODUCT FEATURES:

1. Using RF wireless signals. Remote signals can reach all directions and any position.
2. Built-in batteries can be recharged for use.
3. Built-in Intelligent hibernation system to ensure long standby time.
4. Usage time 48 hours. (If you read for 3 hours a day, they will last 15 days on a single charge. ›
5. The product is compact and highly practical.

HOW TO USE

• Step 1: First. hold on the clip button for 3 seconds. Then the red light is steady on.
• Step 2: Press any key of the remote control.
• Step 3: The blinking blue light of the clip indicates that the matching code is successful.

When the remote control has no operation within 8 minutes, the clip will automatically enter the hibernation energy-saving standby mode. Clip built-in intelligent sleep system, please press the button to activate before each use. Next, clip the clip to the edge of the screen reading area to use.

PRODUCT COMPONENTS

1. Remote control X1
2. Clip the X1
3. Type-c charging cable X2

WARNING:

1. After long-term storage, please charge the product before using it.
2. Non-waterproof, please don’t use in extremely cold, hot, humid environments.
3. Do not use the clip roughly to avoid breaking them.

IMPORTANT TIPS:

1. The two buttons of the remote all have a forward function, not a backward function.

2. The total thickness of the e-reader and cover can’t exceed 11.5mm; otherwise, remove the case to use.
   Can’t exceed 11.5mm

3. When pressing the remote or clip key, the LED no light, or a red light is flashing, please charge it up before using it.

4. The input voltage is USB 5.0V. Phone chargers can be used. The indicator light flashes red when charging and goes out when fully charged.）

5. Keep the clip trigger point clean.

6. Ensure the clip trigger point is close to the screen during use.

7. In the case of all green lights, please re-match the signal if the remote control cannot control the clip

8. Please try the following operations when the e-reader can’t turn pages.

9. Try more position and direction on the screen to find a suitable point to trigger.

10. Clip the active clip to the screen. off the e-reader screen and on it again.

11. Clip the clip to a certain number of the mobile calculator APP to test whether it works or not. If not, please send a message to contact us ;

WARRANTY

1 YEAR WARRANTY

• We provide you with a 1-year warranty and permanent US technical support.
• This means that if anything goes wrong with the unit (other than accidental damage) within the first year of ownership, we will replace the unit for a fee, 100% at our cost.
• When you encounter any problems in the process of use, please contact us by sending a message to Amazon. We will give you a quick and satisfactory reply.

FCC

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Portable RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>