EP MT-10 SP Oil Cooler Guard Installation Guide
- June 17, 2024
- Support
Table of Contents
- MT-10 SP Oil Cooler Guard
- Specifications:
- Product Usage Instructions:
- Step 1: Unboxing
- Step 2: Pre-Installation Check
- Step 3: Installation
- Step 4: Final Checks
- Maintenance:
- Q: How often should I inspect the oil cooler guard?
- Q: What should I do if I find dirt or debris trapped?
- Q: Can I use any tools for installation?
MT-10 SP Oil Cooler Guard
Specifications:
- Product: Yamaha MT-10 SP Oil Cooler Guard
- Manufacturer: Evotech Performance
- Website: www.evotech-performance.com
Product Usage Instructions:
Step 1: Unboxing
Open the package and ensure all components are included.
Step 2: Pre-Installation Check
Inspect the oil cooler guard for any visible defects or
damage.
Step 3: Installation
-
Position the Oil Cooler Guard in place over the oil
cooler. -
Secure the guard in place using the provided fixings.
-
Repeat the installation steps on both sides of the oil
cooler.
Step 4: Final Checks
Ensure all fixings are fully tightened to avoid any loose
components.
Maintenance:
Periodically inspect the oil cooler guard to ensure no dirt or
debris is trapped between the guard and the radiator/oil cooler.
Clean if necessary to maintain cooling efficiency.
Frequently Asked Questions (FAQ):
Q: How often should I inspect the oil cooler guard?
A: It is recommended to perform periodic inspections to check
for dirt and debris, ideally every few weeks depending on
usage.
Q: What should I do if I find dirt or debris trapped?
A: Remove the guard carefully, clean both the guard and the oil
cooler, then re-install securely.
Q: Can I use any tools for installation?
A: It is recommended to use the tools provided with the product
to ensure proper installation without damaging any components.
www.evotech-performance.com
Yamaha MT-10 SP Oil Cooler Guard Instructions
Installation Instructions
A 1 x Oil Cooler Guard
Installation Instructions
1
Repeat Both Sides
Installation Instructions
2
Repeat Both Sides
Installation Instructions
3
Repeat Both Sides
Installation Instructions
4
Repeat Both Sides
Installation Instructions
5
Installation Instructions
6
Installation Instructions
7
Installation Instructions
8
Installation Instructions
9
Installation Instructions
10
Installation Instructions
11
Reverse Stages 8 and 4 – 1
Installation Instructions
12
It is recommended that periodic inspections are made to ensure that dirt and
debris have not become trapped between the guard
and the radiator/oil cooler. Such dirt and debris would reduce the cooling
efficiency of the radiator/oil cooler.
It is recommended that periodic inspections are made to ensure that all
fixings are fully tightend.
www.evotech-performance.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>