ciarra CBCS5913A Cooker Hood Body User Manual
- June 17, 2024
- CIARRA
Table of Contents
ciarra CBCS5913A Cooker Hood Body
Contact Information
If you have any questions, please contact us at:
E-mail: info@ciarraappliances.com
Safety
WARNING: Failure to install screws or fixing device in accordance with these instructions may result in an electrical hazard.
Specifications
| Voltage | 220V-240V~ 50Hz |
|---|---|
| Engine Power | 1 x 70W |
| Lamp Power | 2 x 2W |
| Appliance Dimensions | 520280130mm (W x D x H) |
Note: The manufacturer reserves the right to make any technological improvements or modifications without prior notice.
Components and Required Tools for Installation
- 4*20mm Screws (x4)
- Installation Manual (x1)
- Cooker Hood Body (x1)
- Outlet (x1)
- Windbreak Blade (x1)
- Protective Gloves
- Spirit Level Ruler
- Measuring Tape
- Double Sided Tape or Tape
- Cross-Head Screwdriver Set
- Electric drill and 8mm drill
Installation
Instructions include removing protective film from the hood body, recommended installation height, and steps for securing the hood, including electrical connections and LED light function testing.
Operation
Always turn on the hood before starting cooking to ensure airflow in the kitchen. After cooking, leave the blower on for a few minutes to clean the air after turning off the hood. This helps keep the entire kitchen clean and fresh.
- Power Button: Used to turn on the fan.
- Low Speed Button: For almost noiseless air ventilation or cooking with minimal smoke and steam.
- Medium Speed Button: For daily cooking.
- High Speed Button: For high speed frying or cooking with a lot of smoke and grease.
- Light Button: Press once to turn on the lights. Press again to turn off the lights.
Cleaning and Maintenance
Details on cleaning grease filters, replacing charcoal filters, cleaning stainless steel, and cleaning painted finishes. It advises on what to do, what not to do, and which cleaning products to avoid to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Hood does not work | No electric power supply | Check if the plug is connected |
and the main power switch is turned on
Poor airflow| Fat filters clogged with accumulated grease| Clean fat filters
and reinstall after drying
Extraction is not effective| Incorrect ventilation, charcoal filters not
installed, or foreign object in contact with the fan blades| Ensure proper
kitchen ventilation, install new charcoal filter sets, and remove any foreign
objects
Lights not working| Light is damaged, light cable clamp is loose| Replace
damaged light, reset connection
If the problem persists after performing the above actions, please contact CIARRA Customer Service Center for assistance.
Environmental Protection
Instructions on how to dispose of electrical products and compliance with the European WEEE directive.
FAQs
Q: What should I do if my cooker hood doesn't turn on?
A: Ensure the appliance is plugged in and the main power switch is on. Refer to the troubleshooting section for more details.
Q: How often should I clean or replace the filters in my cooker hood?
A: Grease filters should be cleaned frequently and can be washed in the dishwasher at high temperatures without detergent. Charcoal filters should be replaced every 2-4 months, depending on usage.
Q: What are some common issues to avoid when maintaining stainless steel?
A: Avoid using abrasive materials like steel wool or harsh cleaning products that contain bleach, chlorine, fluorine, iodine, bromine, or flammable products like acetone or alcohol.
Q: Who do I contact if I have issues with my cooker hood after following the troubleshooting guide?
A: Contact CIARRA Customer Service Center for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>