LUCIDE 13135-01-31 Gosse Flush Ceiling Light Instruction Manual

: June 17, 2024
: LUCIDE

Table of Contents

LUCIDE 13135-01-31 Gosse Flush Ceiling Light
General
Specifications
TECHNICAL DRAWING & DIMENSIONS
Installation Instructions
Safety Instructions
Warranty
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUCIDE 13135-01-31 Gosse Flush Ceiling Light

RECOMMENDED LUCIDE LIGHT SOURCE

49020/05/60
Dimmable: Yes
Included: No

General

Dimensions LxWxH: 19,5cm x 19,5cm x 23,8cm
Main material: Porcelain
Ceiling rose material: Metal
Colour: White and Matt Gold / Brass
Style: Retro
Shape: Cylinder
Weight: 1,42kg

Specifications

Dimmable: Yes
Light direction: Around (Diffuse)
Adjustable in height: Not In Height Adjustable
Directional: Not Directional
Cable: No Cable On Product
Sensor: Without Sensor
Control: Light Switch Control
Power supply: Adapter/Power Grid
IP-Class: 20
Electric Class: 2
Number of light sources: 1
Lamp socket: E27
Maximum wattage: 40W
Power requirements: 220-240V~50Hz
Warranty: 2 Years

TECHNICAL DRAWING & DIMENSIONS

Item number: 13135/01/31
EAN code: 5411212134172

LUCIDE-13135-01-31-Gosse-Flush-Ceiling-Light-fig-1

Installation Instructions

LUCIDE-13135-01-31-Gosse-Flush-Ceiling-Light-fig-2

Safety Instructions

Please read this notice carefully and keep it during the lifetime of this product.
Follow the instructions for a safe and correct installation and functioning of the light fixture.
The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
Always isolate the power before commencing installation, maintenance or repair.
In case of doubts, please contact a qualified electrician.
Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installation, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
This is to avoid all risks.
Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling.
Electrical and electronic equipment marked with this symbol indicating a separate collection of such equipment must be returned to a municipal waste collection point.
Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
Class II: The item is double insulated and must not be connected to the earth wire.
Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
IP 20: Protection against contact with a finger
If the protection glass is damaged or broken, it needs to be replaced immediately.
Please respect the minimum distance from the bulb to inflammable objects.

Warranty

Warranty declaration
Lucide NV warrants that the products supplied will be free from defects in material and workmanship for 2 years from the date of purchase by the end user if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty

Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
Normal wear and tear, and discolouring as a result of normal use.
Damage is caused by external causes like fire, water, wrong use/ installation or maintenance of the product.

For warranty claims, the customer needs to hand over the defective fixture/part and the original purchase ticket.