tp-link TL-SF1005D 5-Port 10/100Mbps Desktop Switch Installation Guide
- June 6, 2024
- tp-link
Table of Contents
tp-link TL-SF1005D 5-Port 10/100Mbps Desktop Switch
Installation Connection
Frequently Asked Questions (FAQ)
Q1. The Power LED is not lit.
The Power LED should be lit when the power system is working normally. If the Power LED is not lit, please check as follows:
- A1: Make sure the power cord is connected to the switch with power source properly.
- A2: Make sure the voltage of the power supply meets the requirements of the input voltage of the switch.
- A3: Make sure the power source is ON.
Q2. The Link/Act LED is not lit when a device is connected to the corresponding port.
It is recommended that you check the following items:
- A1: Make sure that the cable connectors are firmly plugged into the switch and the device.
- A2: Make sure the connected device is turned on and working well.
- A3: The cable must be less than 100 meters long (328 feet).
To ask questions, find answers, and communicate with TP-Link users or engineers, please visit https://community.tp-link.com to join TP-Link Community.
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU
declaration of conformity may be found at https://www.tp-
link.com/en/ce.
Specifications
- Standard: IEEE 802.3, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x
- Protocol: CSMA/CD
- Interface: 5/8/16/24 10/100 Mbps Auto-Negotiation RJ45 Ports
- Network Media (Cable): 10BASE-T: UTP category 3, 4, 5 cable (≤100 m) EIA/TIA-568 100Ω STP (≤100 m) 100BASE-TX: UTP 5, 5e cable (≤100 m) EIA/TIA-568 100Ω STP (≤100 m)
- LED Indicators: Power, Link/Act LEDs
- Data Transfer Rate: Ethernet: 10 Mbps (Half Duplex), 20 Mbps (Full Duplex) Fast Ethernet: 100 Mbps (Half Duplex), 200 Mbps (Full Duplex)
- Transfer Method: Store-and-Forward
- MAC Address Learning: Automatically learning, automatically aging
- Frame Forward Rate: 10Base-T: 14881 pps/Port 100Base-Tx: 148810 pps/Port
- Wall Mountable: TL-SF1005D, TL-SF1008D: No TL-SF1016D, TL-SF1024M: Yes
- Distance Between Mounting Holes: TL-SF1016D: 157.2 mm TL-SF1024M: 178 mm
Environmental and Physical Specifications
- Operating Temperature: 0˚C to 40˚C (32˚F to 104˚F)
- Operating Humidity: 10% to 90%RH non-condensing
- Storage Humidity: 5% to 90%RH non-condensing
Safety Information
- Keep the device away from water, fire, humidity or hot environments.
- Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us.
- Do not use damaged charger or USB cable to charge the device.
- Do not use any other chargers than those recommended.
- Adapter shall be installed near the equipment and shall be easily accessible.
- Place the device with its bottom surface downward.
- Use only power supplies which are provided by manufacturer and in the origin packing of this product. If you have any questions, please don’t hesitate to contact us.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>