unitronic OUTDOOR CM R2 Programming Acquisition of The Radio Control Unit Instructions

June 17, 2024
unitronic OUTDOOR

unitronic OUTDOOR CM R2 Programming Acquisition of The Radio Control Unit

unitronic OUTDOOR CM R2 Programming Acquisition of The Radio Control
Unit

PROGRAMMING/ACQUISITION OF THE RADIO CONTROL UNIT

The radio control units included in the pack are already programmed and ready to use.

Press P1:

  1. once to program R1 in monostable mode
  2. twice to program R2 in monostable mode
  3. times to program R1 in bistable mode
  4. times to program R2 in bistable mode press and hold the key on the radio control unit to be acquired until the LED begins to flash.

CODES ERASING:

There are two types of deletion available

Deletion of an individual code:
Press key P2 for approx. 2 seconds (release the key);
the LED will come on, press the key on the radio control unit to be deleted.

Deleting all the acquired codes:
Press P2 until the LED comes on (approx. 8 seconds).
Codes Erasing

DECLARATION OF CONFORMITY

The Manufacturer KON.EL.CO. S.p.A. – Piazza Don Mapelli, 75 – 20099 Sesto San Giovanni (MI) – Italy declares under its sole responsibility that the radio equipment REMOTE CONTROL Mod. Opener Outdoor, code JL2172/UNI, brand Unitronic, complies with the Directive 2014/53/UE. The complete text of the EU Declaration of Conformity is available on the following internet site: www.gbconline.it

Notes for installation
WARNING! It is important the following manual be followed for safety reasons. Incorrect installation or improper use of the product can lead to severe damage to property and/or persons.

The packaging materials should be kept out of the reach of children since they are potentially hazardous.

The product must only be installed by a qualified installer.

Kon.El.Co. S.p.A. declines all responsibility resulting from improper use of device.

Do not modify the device in any way.

Disconnect the power supply prior to any intervention on the system.

The status of the system has a direct influence on the reliability and safety of the device.

Anything not expressly envisaged in these instructions is not permitted.

Store the instructions for future reference.

HE INFORMATION CONTAINED IN THIS INSTALLATION MANUAL MAY BE SUBJECT TO CHANGE WITHOUT PRIOR WARNING.

Warranty

This product is covered by a 24 months guarantee from the date of purchase against any manufacturing defects. Any damage caused by other reasons is not covered. A purchase document must be presented together with the request for repair under guarantee.

At the end of its life, the device has to be separated from the other waste. Consign the device and all its components together to a center of electronica and electrotechnical waste recycling center, designated by your local authorities.

Symbol The remote control of this appliance works with batteries that fall under the European directive 2013/56 / EU and that cannot be disposed of with normal household waste. Please inform yourself about the local regulations regarding the separate collection of batteries. In case the battery cannot be removed by the user, the recovery and recycling centers can carry out the disassembly by removing the battery. Proper disposal allows you to avoid negative consequences for the environment and health.

Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals