KIDDE 29HD Smoke Alarms Carbon Monoxide Fire Blankets User Guide
- June 17, 2024
- Kidde
Table of Contents
KIDDE 29HD Smoke Alarms Carbon Monoxide Fire Blankets
PRODUCT OVERVIEW
HOW SAFE IS YOUR HOME?
Kidde provides a full range of smoke and CO alarms, as well as fire
extinguishers and blankets, to ensure every room of your home is protected.
Smoke Alarms
Model #
| ****
29HD
| ****
DY29
| ****
10Y29
---|---|---|---
Sensor
| ****
Optical
| ****
Optical
| ****
Optical
| Battery Type | 9V | 9V | Sealed-in Lithium |
|---|
Battery Life
| ****
1-Year Minimum
| ****
5-Years Minimum
| ****
10-Years Minimum
Alarm Warranty
| ****
3-Years
| ****
5-Years
| ****
10-Years
Test / Hush
| ****
Yes
| ****
Yes
| ****
Yes
End of Life Warning
| ****
No
| ****
Yes
| ****
Yes
Mounting Locations
| ****
Wall or Ceiling
| ****
Wall or Ceiling
| ****
Wall or Ceiling
Standard
| ****
EN14604:2005
| ****
EN14604:2005
| ****
EN14604:2005
Temperature Range
| ****
0 °C to 40 °C
| ****
0 °C to 40 °C
| ****
0 °C to 40 °C
Humidity ranges :up to 93% RH (non-condensing) Up to 93% RH (non-
condensing) Up to 93% RH (non-condensing)
Alarm Dimensions :100mm x 33mm 100mm x 33mm 104mm x 45mm
Alarm Weight :146g 146g 170g
MAINTENANCE AND SAFETY
- TEST your smoke alarm monthly
- CLEAN by gently removing dust with a soft brush
- CHANGE the battery when a low warning alert sounds
- REPLACE the alarm at the end of its life
SMOKE ALARM CHECKLIST
A GOOD SMOKE ALARM SHOULD HAVE:
- K10SCO
- Smoke +
- Carbon Monoxide
- 2 x AA
- 1-Year Minimum
- 10-Years
- Yes
- Yes
- Wall or Ceiling
- EN14604 / EN50291
- 0 °C to 40 °C
- Up to 90% RH
- (non-condensing)
- 145 x 45mm
- 360g
A loud (at least 85dB) alarm sound
- Certification to EN 14604 standards (Smoke)
- The European CE mark or UKCA mark
- Ease of installation and simple to use
- Always follow the manufacturer’s instructions
Carbon Monoxide Alarms
Model #
| ****
K5CO
| ****
K5DCO
| ****
K7CO
---|---|---|---
Sensor
| ****
Electrochemical
| ****
Electrochemical
| ****
Electrochemical
Battery Type
| ****
2 x AA
| ****
2 x AA
| ****
2 x AA
Battery Life
| ****
1-Year Minimum
| ****
1-Year Minimum
| ****
1-Year Minimum
Sensor Life
| ****
10-Years
| ****
10-Years
| ****
10-Years
Alarm Warranty
| ****
7-Years
| ****
7-Years
| ****
10-Years
Test / Hush
| ****
Yes
| ****
Yes
| ****
Yes
End of Life Warning
| ****
Yes
| ****
Yes
| ****
Yes
Digital Display Screen| ****
No
| ****
Yes
| ****
No
Mounting Locations
| ****
Wall-mount or free-standing
| ****
Wall-mount or free-standing
| ****
Wall-mount or free-standing
3 x LED‘s (Operate, Fault, Alarm)| ****
Yes
| ****
Yes
| ****
Yes
Standard
| ****
EN50291-1:2018
| ****
EN50291-1:2018
| EN50291-1:2018 EN50291-2:2019
Temperature Range
| ****
-10 °C to 40 °C
| ****
-10 °C to 40 °C
| ****
-10 °C to 40 °C
Humidity Range
| Up to 90% RH
(non-condensing)
| Up to 90% RH
(non-condensing)
| Up to 90% RH
(non-condensing)
Alarm Dimensions
| ****
127mm x 73mm x 39mm
| ****
127mm x 73mm x 39mm
| ****
119mm x 72mm x 39mm
Alarm Weight
| ****
162g
| ****
162g
| ****
160g
Carbon Monoxide (CO) is a poisonous gas, you can’t see, taste or smell and is produced when fuel doesn’t burn cleanly. Place your alarm near gas boilers, kitchen hobs, open fires and portable heaters.
K7DCO
|
K10LLCO
|
K10LLDCO
|
K4MCO
---|---|---|---
Electrochemical
|
Electrochemical
|
Electrochemical
|
Electrochemical
2 x AA
|
Sealed-in Lithium
|
Sealed-in Lithium
| Rechargeable
Lithium Back-up
1-Year Minimum
| 10-Years Mini- mum| 10-Years Mini- mum|
n/a
10-Years
|
10-Years
|
10-Years
|
10-Years
10-Years
|
10-Years
|
10-Years
|
7-years
Yes
|
Yes
|
Yes
|
Yes
Yes
|
Yes
|
Yes
| Yes – audible and visual
Yes
|
No
|
Yes
|
No
Wall-mount or free-standing| Wall-mount or free-standing| Wall-mount or free- standing| Wall or Ceiling (bracket inclu- ded)
Yes
|
Yes
|
Yes
|
No
EN50291-1:2018 EN50291-2:2019|
EN50291-1:2018
|
EN50291-1:2018
|
EN50291-1:2018
-10 °C to 40 °C
|
-10 °C to 40 °C
|
-10 °C to 40 °C
|
0ºC to + 40ºC
Up to 90% RH
(non-condensing)
| Up to 90% RH
(non-condensing)
| Up to 90% RH
(non-condensing)
| 5% – 95% RH
(non-condensing)
119mm x 72mm x 39mm| 119mm x 72mm x 39mm| 119mm x 72mm x 39mm| 147 x 147 x
42mm
160g
|
160g
|
160g
|
350g
MAINTENANCE AND SAFETY
- FIT an audible CO alarm and test it
- SERVICE your fuel-burning appliances
- CLEAR the ventilation for your stove, fire or boiler flue
- SPOT the physical signs of CO production or poisoning
CARBON MONOXIDE ALARM CHECKLIST
A GOOD CO-ALARM SHOULD HAVE:
- A loud (at least 85dB) alarm sound
- Certification to EN 50291 (CO) standards
- The European CE mark or UKCA mark
- Ease of installation and simple to use
NEW – THE WORLD’S
SMALLEST ALARMS
Despite the micro design, the KIDDE 40mm smoke and heat alarms are certified
according to the highest standards. These alarms are also tested and approved
for Caravans and Recreational Vehicles (RV). In addition, Kidde manufactures
the World’s smallest CO alarm. Like Kidde’s 40mm Smoke alarms, the CO alarm is
also approved for Caravans and Recreational Vehicles (RV).
NEW – The World’s Smallest Alarms from Kidde
| Model # | K2007-015 | K4002-015 | K3003-015 |
|---|---|---|---|
| Alarm Type | Smoke Alarm | Carbon Monoxide Alarm | Heat Alarm |
| Sensor Type | Optical | Electrochemical | Thermistor |
| Primary Power Supply | Sealed-in Lithium 3V CR123A Battery | Sealed-in Lithium | |
| 3V CR123A Battery | Sealed-in Lithium 3V CR123A Battery | ||
| Sound Output Level | 85dB (A) at 3 meters (minimum) | 85dB (A) at 3 meters | |
| (minimum) | 85dB (A) at 3 meters (minimum) | ||
| Mounting Options | Wall-mount or ceiling-mount | Wall-mount or ceiling-mount |
Wall-mount or ceiling-mount
End of Life Warning| Not applicable| Alerts user to replace unit after 10
years operation| Not applicable
Standard| EN14604:2005| EN50291-1:2018| EN54-5
Operating Temperature Range| +4ºC to +38ºC| +4ºC to +38ºC| +4ºC to +38ºC
Humidity Range| Up to 90% RH (non-condensing)| Up to 90% RH (non-condensing)|
Up to 90% RH (non-condensing)
Storage and Transport| -20 °C to 60 °C, 5% to 95% RH (non-condensing)| -20 °C
to 60 °C, 5% to 95% RH (non-condensing)| -20 °C to 60 °C, 5% to 95% RH (non-
condensing)
Alarm Dimensions| 40mm (diameter) x 41mm (depth)| 40mm (diameter) x 38mm
(depth)| 40mm (diameter) x 40mm (depth)
Alarm Weight (including batteries)| 43g| 40g| 43g
Mains Smoke Alarms
| Model # | KF20 | KF20R |
|---|---|---|
| Sensor | Optical | Optical |
| Button Test | Simulates the effect of smoke within the sensing chamber, checks | |
| electronics and sounder | Simulates the effect of smoke within the sensing |
chamber, checks electronics and sounder
Automatic Self-test| Circuitry is tested and unit beeps (chirps) if fault is
detected| Circuitry is tested and unit beeps (chirps) if fault is detected
Supply Voltage| 230V AC, 50 Hz (nominal UK voltage)| 230V AC, 50 Hz (nominal
UK voltage)
Power Consumption| < 15mA| < 15mA
Connection| Push-in/snap-fit type connector with 150mm long flying leads
(supplied)| Push-in/snap-fit type connector with 150mm long flying leads
(supplied)
Battery Back-up| User-replaceable alkaline 9V battery (522/6LR61)| Non user-
replaceable 3 x 3V rechargeable Lithium Aluminium Alloy / Magnesium Composite
Oxide cells (ML2430)
Power-on Indicator| Continuous green LED| Continuous green LED
Alarm Sounder| Electronic piezo-electric sounder (T3 pattern sound – 3 pulses
– space – 3 pulses), soldered contacts| Electronic piezo-electric sounder (T3
pattern sound – 3 pulses – space – 3 pulses), soldered contacts
Sound Output| 85dB (A) minimum at 3 metres| 85dB (A) minimum at 3 metres
Alarm Frequency| 3.2 kHz typical| 3.2 kHz typical
Dust Protection| In-built foam gasket in rear of alarm to prevent dust ingress
into rear of the alarm| In-built foam gasket in rear of alarm to prevent dust
ingress into rear of the alarm
Alarm Status| Red LED flashes approx once every five minutes = normal
operation Red LED flashes once a second = sensing smoke (sounder alarm sounds)
Red LED flashes once every ten seconds = in hush condition (auto-reset after
15 minutes)| Red LED flashes approx once every five minutes = normal operation
Red LED flashes once a second = sensing smoke (sounder alarm sounds) Red LED
flashes once every ten seconds = in hush condition (auto-reset after 15
minutes)
Interconnection| Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO)
can be hardwire interconnected| Up to 24 Firex and Kidde ‘Slick’ units (smoke,
heat and CO) can be hardwire interconnected
Fixing| Mounting bracket ring supplied with two ‘T’ slot fitting option 57mm
spacing to a maximum of 90mm for standard screw fittings on back boxes Bracket
has 50mm diameter central access hole for cabling| Mounting bracket ring
supplied with two ‘T’ slot fitting option 57mm spacing to a maximum of 90mm
for standard screw fittings on back boxes Bracket has 50mm diameter central
access hole for cabling
Alarm Dimensions| 127mm x 39mm| 127mm x 39mm
Alarm Weight| 242g| 242g
CAVIUS RF Smoke and Heat Alarms
| Feature | Description |
|---|---|
| Automatic Self-test | Circuitry is tested and unit beeps (chirps) if fault is |
detected
Supply Voltage| 230V AC, 50 Hz (nominal UK voltage)
Power Consumption| < 15mA
Connection| Push-in/snap-fit type connector with 150mm long flying leads
(supplied)
Battery Back-up| – User-replaceable alkaline 9V battery (522/6LR61)
| – Non user-replaceable 3 x 3V rechargeable Lithium Aluminium Alloy /
Magnesium Composite Oxide cells (ML2430)
Power-on Indicator| Continuous green LED
Alarm Sounder| Electronic piezo-electric sounder (T3 pattern sound – 3 pulses
– space – 3 pulses), soldered contacts
Sound Output| 85dB (A) minimum at 3 metres
Alarm Frequency| 3.2 kHz typical
Dust Protection| In-built foam gasket in rear of alarm to prevent dust ingress
into rear of the alarm
Alarm Status| – Red LED flashes approx once every five minutes = normal
operation
| – Red LED flashes once a second = sensing smoke (sounder alarm sounds)
| – Red LED flashes once every ten seconds = in hush condition (auto-reset
after 15 minutes)
Interconnection| Up to 24 Firex and Kidde ‘Slick’ units (smoke, heat and CO)
can be hardwire interconnected
Fixing| Mounting bracket ring supplied with two ‘T’ slot fitting option
| 57mm spacing to a maximum of 90mm for standard screw fittings on back boxes
| Bracket has 50mm diameter central access hole for cabling
Alarm Dimensions| 127mm x 39mm
Alarm Weight| 213g
The new CAVIUS-branded range of smoke, heat and CO alarms is available in Kidde’s fire safety portfolio and provides even more choices for residential applications. A key highlight of the new range of alarms is the introduction of smoke and heat alarms featuring RF technology for wireless connectivity. If one smoke alarm detects a fire, all alarms will activate, providing occupants with a greater chance to be alerted to the fire threat and escape.
The range includes the mains-powered, wireless CV2208 smoke alarm featuring an outlet for pendant lights, to avoid an extra unit on the ceiling. The line-up also includes a smart remote that alerts occupants to fire. If an alarm occurs, the smart remote will activate with a flashing warning light. The remote can also be used to test or silence other alarms installed in the collection and features a torch function to illuminate escape routes at night.
CAVIUS RF Smoke and Heat Alarms
| Model # | CV2106 | CV3106 | CV2208 | CV3202 | CV9001 |
|---|---|---|---|---|---|
| Device Type | Battery-operated RF Smoke Alarm | Battery-operated RF Heat Alarm | |||
| Mains-powered RF Smoke Alarm | Mains-powered RF Heat Alarm | Smart remote with |
emergency light
Sensor Technology| Optical| Thermistor| Optical| Thermistor| n/a
Power Source| DC| DC| 230V Mains| 230V Mains| DC
Battery Type| Non-replaceable, 10-year lithium| Non-replaceable, 10-year
lithium| Non-replaceable, 10-year lithium back-up| Non-replaceable, 10-year
lithium back-up| 3 x AAA batteries supplied
Battery Life| 10-years| 10-years| 10-years| 10-years| 1-year minimum
Interlink Frequency| 868MHz| 868MHz| 868MHz| 868MHz| 868MHz
Interlink Range| Minimum 100m in open field| Minimum 100m in open field|
Minimum 100m in open field| Minimum 100m in open field| Minimum 100m in open
field
Operating Temperature| +4ºC to +38ºC| +4ºC to +38ºC| +4ºC to +38ºC| +4ºC to
+38ºC| +4ºC to +38ºC
Operating Humidity| Up to 90% RH non-condensing| Up to 90% RH non-condensing|
Up to 90% RH non-condensing| Up to 90% RH non-condensing| Up to 90% RH non-
condensing
Storage Temperature| -20ºC to +60ºC| -20ºC to +60ºC| -20ºC to +60ºC| -20ºC to
+60ºC| -20ºC to +60ºC
Storage Humidity| Up to 93% RH non-condensing| Up to 93% RH non-condensing| Up
to 93% RH non-condensing| Up to 93% RH non-condensing| Up to 93% RH non-
condensing
Warranty| 10-years| 10-years| 10-years| 10-years| 10-years
Alarm Dimensions| D: 78mm x H: 41mm| D: 78mm x H: 42mm| D: 97mm x H: 52mm| D:
78mm x H: 48mm| D: 58mm x W: 140mm
Alarm Weight| 96g| 50g| 200g| 108g| 48g
Fire Extinguishers and Fire Blankets
| Model # | KS1KG | KSPD2G |
|---|---|---|
| Fire Rating | 8A 34B C | 13A 89B C |
| Extinguishing Agent | Dry powder (monoammonium phosphate) | Dry powder |
(monoammonium phosphate)
Discharge Range| 4 metres| 4 metres
Discharge Duration| 8 seconds| 10 seconds
Temperature Range| -30°C to +60°C| -30°C to +60°C
Propellant| 15 bar nitrogen at 20°C| 15 bar nitrogen at 20°C
Standard| BSI certified to BS EN3| BSI certified to BS EN3
Certifications| CE tested and certified| CE tested and certified
Warranty| 6 years| 6 years
EXTINGUISHERS
Small, hand-held, easy-to-use A/B/C rated fire extinguishers are multi-purpose
and designed to work on all types of common house or workplace fires. Remember
to familiarise yourself with the instructions before the event of a fire.
FIRE RATING GUIDE
- A – wood, paper, textiles
- B – petrol, oils and paints
- C – flammable gases
FIRE BLANKETS
A fire blanket should be present in all homes and is an essential fire safety
product – easily wall-mounted in kitchens it is ideal for tackling fat-pan
fires. It can also be used to wrap around a person whose clothing has caught
alight.
| Model # | FB1 |
|---|---|
| Pack Dimensions | 202mm x 175mm x 45mm |
| Blanket Dimensions | 1.1m x 1.1m |
| Weight | 610g |
| Case Quantity | 6 units |
| Certifications | BSEN-1896 |
| Warranty | 10 years |
CO2 Air Quality Monitors
| Specification | Details |
|---|---|
| Sensor Type | CO2 NDIR Infrared sensor with 10-year lifetime |
| Calibration | Built-in automatic 24-hour calibration |
| Power Supply | AC Power with 1.5m cable included |
| Battery | Over 12-hours rechargeable battery back-up |
| LCD Display | CO2 reading (400 – 5,000ppm), Temperature reading (-5°C to |
+50°C), Humidity reading (0 – 99% RH), Clock, 7-days CO2 readings history
(trend)
LEDs| Green, Amber and Red ‘Traffic Light’ notification levels
Display and LED Brightness| Self-adjusting LCD and LED brightness (night mode)
Alarm| Audible warning plus voice alerts
Voice Language Options| English, German, French, Italian, Spanish and Dutch
Mounting Options| Wall-mount or free-standing options
Unit Weight| 230g
Unit Dimensions| 99mm x 99mm x 36mm
Unit Lifetime| 10-years
Warranty| 2-years
The Kidde KCO2M10UK CO2 Monitor can help to provide details and alerts of indoor air quality levels, ideal for the home, school or workplace.
CERTIFICATION/APPROVALS
EN 50543:2011+AC:2014
Technical Specification
EMAIL – THE BEST WAY
For convenience email us at:
[email protected]
CONTACT US BY POST
Kidde Safety Europe Ltd
1st Floor, Ash House
Littleton Road
Ashford, Middlesex
TW15 1TZ
FIND OUT MORE
Visit our website: kiddesafetyeurope.co.uk
Phone: 03337 722227