DermRays V4S 810nm Diode Laser Hair Removal User Guide
- June 17, 2024
- DermRays
Table of Contents
INSTRUCTIONS FOR USE
Quick Start Guide
V4S 810nm Diode Laser Hair Removal
DO NOT use if you are pregnant.
DO NOT use the device if you are under the age of 18 or use it on anyone else
under the age of 18.
DO NOT use if you have a pacemaker.
DO NOT use the device on or around the eyes, eyebrows, or eyelashes.
DO NOT use the device anywhere on the ears, nipples, genitals or around the
anus.
Frequency of treatment
-
The device should be used 3 times a week for the first 2 weeks.
-
For the following 2-3 weeks, use the device twice per week.
-
After 5 weeks, use the device once a month.
-
Depending on the hair condition, it is recommended to use the device more frequently at higher power levels if the hair is thick.
Ensure you shave the treatment area.
PLEASE DO NOT USE ANY OTHER FORM OF HAIR REMOVAL (Waxing/Epilation etc).
After shaving, keep the treatment area clean and dry, and no residue of any
creams or lotions remain on the skin. Plug in your Laser Hair removal device,
and double click the power button to start the device. The device is available
to be used immediately. Before your first treatment, please conduct a “patch
test” on a small skin area and wait for an hour to see if you have any adverse
reaction to the Laser Hair removal technology. To commence treatment, press
the device firmly against the skin. Move the device slowly following each
individual flash of the laser across the treatment area. The Laser Hair
removal device is automatically set at the lowest (Level 1) for the gentlest
treatment.
Press the power button once can increase one level, with a maximum level of 6.
A higher level of power reduces the frequency of laser flashes, which means
slower treatments. At the maximum power Level 6, a whole body treatment only
takes 15 minutes using the device.
- For reference only For safety purposes, if the device loses contact with the skin for over 10 seconds, it will automatically enter Standby mode. Simply press the power button once to re-start your device.
- For more information, please refer to User Manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>