LIEBHERR MRB 3000 Monolith Refrigerator User Guide

: June 17, 2024
: LIEBHERR

Table of Contents

LIEBHERR MRB 3000 Monolith Refrigerator
Product Usage Instructions
Accessories
Features
Product Dimensions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LIEBHERR MRB 3000 Monolith Refrigerator

Specifications

Model: MRB 3000
Type: Monolith Refrigerator Fully Integrated, panel ready
Refrigeration and Freezing
Energy Consumption: 245 kWh/year
Estimated Yearly Energy Cost: $34
Sound Rating: 39 dB(A)
Refrigerator Capacity: 15.0 cu.ft. (425 liters)
BioFresh/BioFresh-Plus Compartment Capacity: 6.5 cu.ft. (185 liters)
Number of Shelves: 4
Number of Door Racks: 3
Number of BioFresh/BioFresh-Plus Drawers: 2 / 1 with LED lighting
Defrost Type: Automatic
Internal Water Dispenser: InfinitySpring
Water Filter: Yes
Door Hinges: Right, reversible
Product Dimensions (H/W/D): 83 3/4″ / 29 11/16″ / 24″ (212.6 cm / 75.4 cm / 61 cm)
Net Weight: 394.6 lbs. (179 kg)
Voltage: 115V / 60Hz

Product Features:

Bio Fresh Plus: Creates independent climates within your refrigerator to keep foods fresh longer
Infinity Swipe: Intuitive electronic touch-control panel with a full-color touch & swipe screen
Infinity Spring: Integrated flush-mounted internal water dispenser
Infinity Light: Side lighting with adjustable brightness
Power Cooling: Ensures consistent temperatures throughout the refrigerator

Product Usage Instructions

Installation:
Refer to the installation instructions or Design Guide for detailed installation steps.

Controls:
Use the InfinitySwipe electronic control panel to adjust settings and temperature.

Cleaning and Maintenance:
Regularly clean the interior and exterior of the refrigerator using a mild detergent and water. Ensure proper ventilation around the unit.

Temperature Settings:
Adjust the temperature settings according to the recommended levels for refrigeration and freezing.

Frequently Asked Questions (FAQ):

Q: How do I change the water filter?
A: Refer to the user manual for step-by-step instructions on how to replace the water filter.
Q: Can I reverse the door hinges?
A: Yes, the door hinges are reversible for flexible installation options.
Q: How do I adjust the brightness of the Infinity Light?
A: Use the control panel to customize the brightness settings of the Infinity Light.

Refrigeration and Freezing

home.liebherr.com

MRB 3000

Estimated energy cost will depend on utility rates and use.
Estimated energy cost based on a national average electricity cost of 14 cents per KWh. °Noise output – according to EN 60704-3.
- BioFresh bins temperatures 32°F (0°C). BioFresh-Plus bin 28°F (-2°C) or 32°F (0°C).
- Please contact your Liebherr Authorized Dealer for door reversal.
Subject to modification. For up-to-date information, visit home.liebherr.com Specifications are for planning purposes only. For more detailed information, refer to installation instructions or Design Guide

Accessories

Accessories for Side-by-Side installation

Side-by-Side kit (includes wall heater)9901 428
Other stainless-steel Toe Kicks for Side-by-Side installation, please visit home.liebherr.com/monolith or refer to the accessory section on the Design Guide for more information.

Features

Bio Fresh Plus
Creates independent climates within your refrigerator and foods retain their vitamins, aromas, and appetizing appearance for significantly longer than in a conventional refrigerator
Infinity Swipe
The intuitive electronic touch-control panel features a full-color 3.5-inch touch & swipe screen that allows you to control every function.
Infinity Spring
Seamlessly integrated flush-mounted internal water dispenser that’s there when you need it, and virtually invisible when you don’t
InfinityLight
Casts beautiful and even side lighting that can tuned according to personal taste, including a soft brightening effect upon opening the doors.
Power Cooling
Allows cool moist air flow into the BioFresh chambers and cold air to circulate behind the door, so items stored in the door remain as cold as everything else in the refrigerator.

Product Dimensions

IMPORTANT! Stated minimum height dimensions include when the leveled feet are fully inserted.
Height can be increased by a maximum of 1″ (26 mm) by turning the adjustable feet. When the appliance is fitted in the recess, the appliance must be raised by turning the adjustable feet so that the appliance top has contact with the anti-tipping bracket. This results in a 4″ (102 mm) Toe Kick height.

Inset

A = 13 1/4″ (337 mm)
B = 1/2″ (12.5 mm)
C = 31 7/8″ (810 mm)

Frameless

A = 13 1/2″ (343 mm)
B = 1/2″ (12.5 mm)
C = 32 3/8″ (822 mm)

Dimension A = without mounted door handle

Cutout Dimensions

A

Cabinet depth frameless installation style = 25″ (635 mm)
Cabinet depth inset installation style = 25″ (635 mm) + panel thickness

B

This is the point where the power cord exits from the appliance’s rear. 3/4″ (19 mm) from the left and 5″ (127 mm) from the floor. The free length of the power cord is 98″ (2.5 m). We recommend power outlet to be placed outside of the appliance opening. A 15 or 20 A, 110-120 VAC circuit grounded and protected by a circuit breaker or fuse is required.

C

The appliance has a recess in this area for cable and waterline laying. 1″ (25 mm) in-depth and 5 1/2″ (140 mm) in height over the whole width of the appliance. The water pressure must be in the range of 40 – 90 psi.
A shut-off valve must be installed between the water line and the main water supply. It must be easily accessible so the water supply can be stopped immediately if necessary.

D

This surface is visible when the appliance door is open.
A designed finish is required.

E1, E2

Depending on the appliance, the anti-tipping bracket is positioned at the top (E1) or base (E2) of the appliance and must be secured to the wall or to the floor, please refer to the installation manual for more information.

Door Panel Dimensions and dimensions of free length for power 30″ recess
Inset installation style

H = 79 7/8″ (2029 mm)
W = 29 3/4″ (756 mm)

Frameless installation style

H = 80″ (2032 mm) Add overlapping dimension to the panel on the top.
W = 30″ (762 mm) Add overlapping dimensions to the panel on both sides.

Panel thickness: Min. 5/8″ (16 mm)* / Max. 1″ (25.4 mm)
Panel and handle weight: Max. 77 lbs. (35 kg)

If a shaker-style panel is used, which is thinner than the minimum panel thickness, shorter screws than those supplied in the accessory pack must be used.