hamax 11940 Breeze and Cocoon Jogger Kit User Manual
- June 10, 2024
- hamax
Table of Contents
11940 Breeze and Cocoon Jogger Kit
User Manual
11940 Breeze and Cocoon Jogger Kit
For more languages, please scan below:
https://www.hamax.com/support/
Congratulations on purchasing the Jogger kit. This manual is additional to the
Hamax Breeze or Cocoon Multifunctional Child Carrier user manual. Please read
the instructions carefully before assembling or using the Hamax Breeze or
Cocoon. We wish you and your children many enjoyable trips!
REMARK: Please see the main user manual (User Manual Hamax Breeze and
Cocoon) for details. Should you no longer have the main manual, this can be
downloaded from www.hamax.com
Keep these instructions in a safe place for later use.
SAFETY GUIDELINES
WARNINGS
- Important – Keep these instructions for future reference
- This product complies with the European standard for child strollers (EN 1888 -2:2018).
- FALL HAZARD from tip over. Before running, jogging or walking fast, a separate jogging wheel must be mounted.
- FALL HAZARD – Wheel can detach and cause tip over. Pull on wheel to assure it is securely attached.
- Ensure that all the locking devices are engaged before use.
- Always use the wrist strap when using the jogger.
- Always test the hand brake of the trailer before using the jogger.
- The hand brake can be used to reduce the speed of the vehicle, not suitable for a direct full stop.
GETTING STARTED – INSTALLATION
-
Packaging content & required tools
• Jogger wheel (1x) [1a] • Safety strap (1x) [1b] • User manual Breeze and Cocoon jogger kit (1x)
• 5 mm hex key (1x) [1c] Attaching and removing the jogger wheel
Attaching and removing the jogger wheel is done similar to the stroller wheel. Please also see the main manual for details. -
Attaching the wrist strap
• Fold the wrist strap [1b] around the push bar [2a] at a convenient location left or right of the brake handle. Choose the side where you will mostly hold and push the trailer.
• Pull the loop at the end of the wrist strap through the glide buckle [2b] on the other end and pull the strap tight. -
Mounting the jogger wheel
• Insert the jogger wheel [3a] into the central connection point [3b]. Verify that the jogger wheel is securely fastened by pulling the jogger wheel. -
Removing the jogger wheel from the trailer
• Push the small button [4a] and then pull the large nose button [4b] upwards to unlock and pull the jogger wheel out of the central connection point [4c].
• Now the stroller wheel [4d] or bicycle arm can be connected to the trailer[4e]. -
Adjusting the jogger wheel alignment
• If your jogger wheel is not aligned correctly, it will cause the trailer to turn left or right during use.
• This can be easily corrected using the adjusting bolts [5a] and [5b]. We recommend making adjustments on the bolt [5b], as indicated in the pictures.
• Turning this bolt clockwise will cause the trailer to steer more to the left, while turning the bolt counter clockwise will cause the trailer to steer more to the right.
• The wheel is best aligned by doing small modifications at a time, checking if the trailer drives straight in between each change.
Pay attention to the reference lines on the fork [5c]. to ease the adjustment.
• If adjusting one bolt is not enough, or the bolt will not turn further, you can also adjust the bolt on the other side.
• Be aware that a change in weight distribution of child(ren) and luggage in the trailer can cause a change in the direction the trailer tends to go and may require readjustment.
Please scan the QR code bellow to be redirected to a video tutorial, explaining how to make this adjustment. https://www.hamax.com/instruction- videos/
CARE AND MAINTENANCE
Steering
TIP: To make slight changes in steering direction, push the trailer
forward from the opposite end of the handlebar. For example, to steer left,
apply pressure on the right end of the handlebar.
- Maintenance
• Adjusting the brake cable: If the brake is not functioning properly when using the hand brake you can adjust the brake cable length at the brakes at both sides near the rear wheels. Are you in doubt, please contact your local dealer for assistance.
Please scan the QR code bellow to be redirected to a video tutorial, explaining how to make this adjustment.
https://www.hamax.com/instruction-videos/
WARRANTY
The Hamax Breeze – Cocoon Jogger kit is warranted from the date of purchase. The warranty period depends on the law of the country in question. The warranty applies to defects in materials or workmanship, and does not cover damage due to improper use, lack of maintenance, failure to follow the user manual, use of force or normal wear and tear. The warranty is valid for the original user only. Please read the use and maintenance recommendations carefully. Conditions that may cause premature wear of the carrier may not be covered by the warranty. Should the carrier require service or you want to make a warranty claim, please contact your local dealer from whom you purchased your carrier.
11940, Rev. 000, User Manual Breeze and Cocoon Jogger kit
Hamax AS
Vålerveien 159
N-1599 Moss
Norway
Tel.: +47 69 23 38 38
email: customerservice@hamax.no
www.hamax.com
References
- Bike trailers, child bike seats, helmets and snow sleds
- Bike trailers, child bike seats, helmets and snow sleds
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>