IFIXIT BL641 Blender Duo Suction Cups Replacement User Manual
- June 17, 2024
- IFIXIT
Table of Contents
IFIXIT BL641 Blender Duo Suction Cups Replacement
Product Information
Specifications :
- Product Name: Nutri Ninja Blender Duo BL641 Suction Cups Replacement
- Tools Required: Phillips #0 Screwdriver, TR8 Torx Security Screwdriver
- Parts Included: Suction cup (1)
Product Usage Instructions
Step 1 – Removing the Suction Cups:
- Turn the blender upside down.
- Remove the six screws securing the bottom panel to the base of the blender:
- Four 0.5 inch 5 gauge Phillips screws
- Two TR8 Torx security screws
- Lift the bottom off of the base.
Step 2 – Replacing the Suction Cups:
- Pull the damaged suction cup off of its pit.
- To reassemble your device, follow these instructions in reverse order.
FAQ
-
Q: How often should I replace the suction cups on my Nutri Ninja Blender Duo BL641?
A: It is recommended to check the condition of the suction cups periodically and replace them if they show signs of deterioration. -
Q: Can I use any other tools for replacing the suction cups?
A: It is best to use the specified Phillips #0 Screwdriver and TR8 Torx Security Screwdriver for the replacement to ensure proper fit and function.
Nutri Ninja Ninja Blender Duo BL641 Suction Cups Replacement
Suctions cups at the bottom of the base can…
Written By: Brian Pham
INTRODUCTION
Suctions cups at the bottom of the base can deteriorate over time. This guide will demonstrate how to replace them.
TOOLS:
Phillips #0
Screwdriver (1)
TR8 Torx Security Screwdriver (1)
PARTS:
Suction cup (1)
Assembly
Step 1 — Suction Cups
- Turn the blender upside down.
- Remove the six screws securing the bottom panel to the base of the blender:
- Four 0.5 inch 5 gauge Phillips screws
- Two TR8 Torx security screws
- Lift the bottom off of the base.
Step 2
- Pull the damaged suction cup off of its pit.
To reassemble your device, follow these instructions in reverse order.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>