JY-JUYAO JY-25 LCD Display Audio Play Time Control Board Countdown Timer Board

JY-JUYAO JY-25 LCD Display Audio Play Time Control Board Countdown Timer

Board

[

](https://manuals.plus/wp- content/uploads/2021/12/jyproduct.webp)

Summary

(2) Set pay and time

Operational time setting| (1) Delay time start,

(2) delay time end

(3) warning time

Inbuilt counter| 8 digits inbuilt counter per input
5V output indication| Output 5V to indicate timing

Working Mode

Mode 1

1-1: pay and work immediately

1. First use Pay→run first use time, and channel 1 device work→continue use pay →add continue use time→time’s up→device stop working.
2. Push a Button Set 1/2/3→pay→reach the value→run the time, and machine works →push the push button again → add the time

Mode 1-2: pay→deposit to balance→push button start→run time and machine works

1. First use Pay→push the button START→run first use time, and machine works→ continue use pay→deposit to balance→push the button START→ add continue use time→time’s up→device stop working.
2. Push a Button Set 1/2/3→pay→reach the value→push button START→run the time, and machine works→push the push button START again→add the time

Note:
If SET PAY and TIME on Mode 1-1 and 1-2 is using:

1. Choose 1 of Set 1, Set 2, Set 3 only to work at the same time
2. Free to add time on the working setting
3. Deposit to balance if total pay is not enough.

Mode 2:

Free to choose 1 of 3 machines to use. Machines can not work at the same time.
Pay→Deposit to balance→Push a Button Set 1/2/3→pay→reach the value→run the time, and machine works→push the push button START again→add the time

Note:

1. Set 1 for Machine 1, Set 2 for Machine 2, Set 3 for Machine 3
2. Only 1 device work at the same time
3. Accumulated time for the machine is working
4. Free to use other machine after time runs out.

Optional Function

Audio play: upload MP3 file on self prepare TF card → plug into card slot play timing:

1. pay
2. start working
3. warning time
4. stop working

Note:

1. upload file one by one on TF card to indicate 1-4.
2. Max play time per file: in 1 minute
3. it switches to next file if one file is playing audio and it is time to play next file.
4. If there is timing that is not needed to play, please upload silent sound file to instead

Warning sign: connect beep. It beeps during warning time.

Memory: (1) with Memory: continue working if power off and on (2) without Memory: standby if power off and on
Back to standby automatically: if user has no action in setting time after inserting coins or pausing, it back to standby automatically.
Delay START: delay starting before
Delay End: delay stopping working after time runs out

Connector No

Please follow this picture and following table on next page to connect wires

2
Mode 2: button START for Channel 1| 16: Output: switch control-Channel 3
3:Mode1-1 and Mode1-2: Select Button Set 2| 17-22: output DC+5V
Mode 2: button START for Channel 2| 17: warning time
4:Mode1-1 and Mode1-2: Select Button Set 3| 18/19: running time
Mode 2: button START for Channel 3| 20: delay time
5:Mode1-1 and Mode 2: no use| 21: time runs out
Mode1-2: button START| 22: time start running
7: Button refund for connector 8| 23: Setting button
8: refund signal: Gnd, signal, DC12V| 24: TF card slot
9: Input 3| 25/26: For speaker 4 ohm 5watt
10: Input 2| 27: output sound source
11: Input 1| 28: volume adjustment for 25 and 26
12: DC12V power input: DC Jack 5.5*2.5mm| 29: Beep connector
13:DC12V power input: connect wire|

Note:

1. Free to choose 1 of 12 and 13 connecting to power
2. Free to choose 1 of 25 and 26 connecting to speaker
3. wire for 27 is not enclosed

Connector Define

1: DC+5V (Red)

2: GND(Black)

3: Signal (White)

| 1: GND(Black)

2: Signal (White)

3: DC+12V (Red)

| 1: DC+12V (Red)

2: Signal (White)

3: GND(Black)

| 1: GND(Black)

2: DC+12V (Red)

| (1)  Control N / –

(2) L / + to power

Setting

Please use Connector No. 23 and follow following table to set up:

1. Enter to Main menu: Press “SET” when standby
2. Enter to Sub-menu: Press “UP” or “DN” to select on Main menu→Press “ SET” to enter
3. Press “UP” or “DN” to adjust value and setting→Press “BACK” to save and back to Main menu When you set up time, Icon “^^” on the bottom indicates the one you are selecting→ Press “ SET” to switch
4. Finish adjustment: Press “BACK” to save and back to previous screen show
5. Check income: Press “C”→input 1 income shows→Press “C”→input 2 income shows→ Press “C”→input 3 income shows
6. Reset counter: Hold on “C” for 3 seconds→Reset current input No. Record
   Note: input income is reset separately

Display and Setting specification

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>