HYLONE 24-7 High Back Drafting Chair Instruction Manual
- June 17, 2024
- HYLONE
Table of Contents
HYLONE 24-7 High Back Drafting Chair
Product Information:
Specifications
- Back Cushion: 1 piece
- Seat Cushion: 1 piece
- Arms: 2 pieces
- Seat Plate: 1 piece
- Foot Ring: 1 piece
- Gas Lift: 1 piece
- Star Base: 1 piece
- Casters: 5 pieces
- Bolts M6*40mm: 4 pieces
- Bolts M6*20mm: 6 pieces
- Cap Covers: 4 pieces
- Washer M6*18mm: 8 pieces
- Washer M6*15mm: 4 pieces
- Bolts M6*30mm: 2 pieces
Assembly Instructions
- Attach the arms to the seat cushion using bolts and washers.
- Buckle the arms with the backrest and secure into place with bolts and washers.
- Attach the seat plate to the seat cushion.
- Turn the star base upside down, press casters into the holes, insert gas lift, and attach the foot ring.
- Attach the seat cushion onto the gas lift firmly.
Adjustment:
- Adjust seat height by pulling up the lever.
- Adjust foot ring height by turning the knob.
- Adjust seat tension using the tilt knob.
- Flip-up armrests for better rest and space-saving.
Safety and Compliance
All repair work or exchange for the height-adjustable gas lift must be done by specialists.
FAQ
Q: How do I adjust the seat height?
A: To raise your seat, lean forward to lift your body weight from the seat, then pull up the lever. To lower the seat, pull up the lever while you’re seated.
Q: Can the arms be adjusted?
A: The arms can be flipped up for better rest and space-saving.
Q: How do I stop the chair from tilting?
A: To stop your chair from tilting, push the lever in to engage the tilt lockout feature.
Hylone High Back Drafting Chair
www.hyloneoffice.com
support@hyloneoffice.com
youtube.com/watch?v=mbHQOSPXiNQ
Instruction Manual
Contents
Make sure that the package contains the following parts:
Assembly Instructions
-
Step 1: Attach the arms to the seat cushion using four (B) bolts, and four (F) washers using the wrench (E) Note: DON’T fully tighten the bolts first, keep 50% tightness.
-
Step 2: Use both hands to buckle the top hole of the arm with the protruding part of the backrest tightly, so as to ensure that the two screw holes on the arm are aligned with the backrest;
Secure into place with four (C) bolts, and four (G) washers using the wrench (E). Cover the holes with cap covers (D), then tighten the four (B) bolts of step 1. -
Step 3: Attach the seat plate to the seat cushion using two (H) bolts, two (C) bolts and four (F ) washers .
Tighten all the bolts with the wrench (E), being careful not to miss-thread the bolts or damage the seat.
- Step 4: Turn the star base upside down, then press the casters into the holes at the end of each base leg;
Insert the gas lift into the center hole of the star base.
Slide the foot ring around the gas lift and tighten into place by turning the tension knob to the right.
- Step 5: Attach the seat cushion down onto the gas lift firmly until the connection is secure.
Adjustment
Adjusting the seat height
To raise your seat, lean forward to lift your body weight from the seat, then
pull up the lever. To lower the seat, pull up the lever while you’re seated.
Adjusting the footring
Turn the knob on the foot ring counter-clockwise, then the foot ring can be
raised up or down to your desired height.
Adjusting the seat tension
Turn the tilt knob clockwise to make it easier to rock your chair backwards.
Turn the tilt knob counterclockwise to make it harder to rock your chair
backwards.
To operate the tilt lockout
To let your chair tilt back, pull the lever out. To stop your chair from
tilting, push the lever in.
Adjusting the arms
The arms can be flipped up, so that you can have better rest and is space-
saving.
Safety and Compliance
- Use care when handling
- Please read the instructions completely before assembly
- Remove all parts from the carton and ensure all parts are included prior to assembly
- Assemble the chair on the carton or carpet to prevent scratching the chair
- Be careful not to cross-thread screws
- Do not use power tools
ATTENTION: ALL REPAIR WORK OR EXCHANGE FOR THE HEIGHT ADJUSTABLE GAS LIFT MUST BE DONE BY SPECIALISTS
Designed for your comfort!
Since1998
For any problem,email us:
support@hyloneoffice.com
1-Year Limited Warranty & Lifetime Technical Support Guaranteed If you are
happy for this product, we appreciate your share on Amazon
www.hyloneoffice.com
support@hyloneoffice.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>