SUPEASY B0BBD548CF Desk Organizer with File Holder Instruction Manual
- June 17, 2024
- SUPEASY
Table of Contents
SUPEASY B0BBD548CF Desk Organizer with File Holder
INSTALLATION INSTRUCTION
Illustrated installation instructions for assembling a product.
Components
| Part | Description | Quantity |
|---|---|---|
| A | Main Body | x1 pcs |
| B | Base Panel | x1 pcs |
| C | Side Panel | x1 pcs |
| D | Secondary Side Panel | x1 pcs |
| E | Back Panel | x1 pcs |
| F | Shelf | x2 pcs |
| G | Shelf Support | x1 pcs |
| H | Top Cover | x1 pcs |
| I | Base Grid | x1 pcs |
| J | Anti-slip Feet Pad | x4 pcs |
| K | Screw (Type K) | x6 pcs |
| L | Screw (Type L) and Nut | x1 set |
| M | Screwdriver | x1 pcs |
Assembly Steps
- Fold Sides of Part A inwards Begin by folding the sides of Part A inwards as indicated by the downward arrows.
- Attach Base Panel Insert Part B along Part A’s side slots and then tighten Screw K on both sides.
- Attach Side Panel Insert Part C along vertical slots and then tighten Screw L on a side of Part C.
- Attach Secondary Side Panel Insert Part D along vertical slots and then tighten Screw J on both sides of Part D.
- Attach Back Panel Insert Part E as shown in the picture and then tighten Screw K on both sides.
- Insert Shelves Place the raised side of Parts F and G facing up, then insert them as shown.
- Place Base Grid Insert Part I as shown in the picture.
- Install Anti-Slip Feet Pads Install Anti-slip Feet Pad J on both sides of the bottom for better balance.
- Attach Top Cover and Finish Insert Part H as shown in the picture, and finally, the installation is successful.
Specifications
| Tool Required | Screwdriver (Provided) |
|---|---|
| Contact Information | Salesupport2020@163.com |
FAQ
What should I do if I encounter problems during installation?
Please contact the email provided for support: Salesupport2020@163.com.
How many screws are provided and of what types?
Six screws of Type K and one set of Screw Type L with a nut are provided.
Do I need my own tools for assembly?
Only a screwdriver is required, which is included in the package.
Are the anti-slip feet pads necessary?
Yes, they are necessary for better balance and should be installed as instructed.
INSTALLATION INSTRUCTION
Fold the Sides of Part A inwards
- Insert B along A’s side slots and then tighten screw K on both sides.
- Insert C along vertical slots and then tighten screw L on a side of C.
- Insert D along vertical slots and then tighten screw J on both sides of D.
- Insert E as the picture showed and then tighten screw K on both sides.
- Place the raised side of F and G facing up, then insert F and G as shown.
- Insert I as the picture shows.
- Install me slip to dier balan sides
- Insert H as the picture showed, and finally, the installation is successful.
Any problem, please contact the email:Salesupport2020@163.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>