BOSCH GLT 300-40 Telescope Tripod for Work Light Instruction Manual
- June 17, 2024
- Bosch
Table of Contents
BOSCH GLT 300-40 Telescope Tripod for Work Light
Safety Instructions
- Read all safety instructions and general instructions enclosed with the tripod and the worklight being used. Failure to observe the safety instructions and general instructions may result in electric shock, fire and/or serious injury.
Keep all the safety instructions and general instructions for future reference
- Ensure that the tripod has a firm footing. The tripod may tip on an uneven or loose floor if the tripod legs are not fully folded out or if is overloaded.
- Take care if you are transporting the tripod with the worklight already fitted. There is a risk of tipping.
- Ensure that all screws and fasteners are always tightened firmly by hand. A tripod that is not secure could become loose or tip over.
Product Description and Specifications
- Please observe the illustrations at the beginning of this operating manual.
Intended Use
- The tripod is exclusively intended for fastening Bosch-cordless work lights with a 5/8″ thread.
Product Features
The numbering of the product features shown refers to the illustrations of the product on the graphic pages.
- Tripod screw
- Rotary fixing
- Tripod leg fastening screw
- Rubber cap
- Opening for the tripod screw
- Cable terminal
Technical Data
Worklight tripod GLT 300-40
- Article number 1 600 A02 TU4
- Tripod thread M10
- Working height max. cm 300
- Load capacity max. kg 10.0
- Weight approx. kg 4.0
- Pack size (length × width × height)
Values can vary depending on the product and are subject to application and environmental conditions. For further information www.bosch- professional.com/wac.
Assembly
- Loosen the fastening screw (3) and fully fold out the tripod legs. Tighten the fastening screw firmly by hand.
- Position the tripod on a fixed, level floor so that the middle column is vertical. Firmly fasten the worklight to the tripod head using the tripod screw (1).
- Loosen the rotary fixings (2) on the telescopic shaft and extend the tripod to the required working height. Tighten the rotary fixings firmly by hand.
- You can fasten a light cable using the cable clamp (6).
- If necessary, you can store the tripod screw (1) in the opening (5).
Maintenance and Service
Maintenance and Cleaning
- Keep the tripod clean so that it can be used properly and safely.
- If the rubber caps (4) on the tripod legs are worn, they can be replaced.
After-Sales Service and Application Service
- Our after-sales service responds to your questions concerning the maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com.
- The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
- In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.
Great Britain
- Robert Bosch Ltd. (B.S.C.)
- P.O. Box 98
- Broadwater Park
- North Orbital Road
- Denham Uxbridge
- UB 9 5HJ
- At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
- Tel. Service: (0344) 7360109
- E-Mail: boschservicecentre@bosch.com
You can find further service addresses at: www.bosch- pt.com/serviceaddresses.
CONTACT
- Robert Bosch Power Tools GmbH
- 70538 Stuttgart
- GERMANY
- www.bosch-pt.com.
1 609 92A 8MH (2023.06) T / 36
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>