nikki 3524D6 Light Chandelier Instruction Manual
- June 17, 2024
- NiKKi
Table of Contents
nikki 3524D6 Light Chandelier
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W, LED 4W bulb types and wattages. Do not exceed recommended wattages
Description
SKU:# 3524D6
(Not included the bulb)
Parts included:
| Part | Description | QTY |
|---|---|---|
| B | Green Screw | 1 |
| D | Mounting Plate | 1 |
| E | Canopy | 1 |
| F | Canopy Nuts | 2 |
| G | Small Metal Tube | 1 |
| H | Large Metal Tube | 3 |
| I | Middle Metal Tube | 2 |
| J | Lip | 1 |
| K | Fixture | 1 |
| L | Haxtun | 6 |
| M | Spring Washer | 6 |
| N | Allen Wrench | 1 |
| 0 | Elbow Pipe | 6 |
| p | Screw | 6 |
| Q | Metal Plate | 3 |
| R | Metal Connector | 6 |
| s | Metal Cup | 6 |
| T | Metal Sleeve | 6 |
| u | Wiring Terminal | 2 |
| V | Threaded Pipe | 1 |
| w | Metal Cap | 1 |
| X | Finial | 1 |
| y | Joint | 1 |
Hardware enclosed:
| Part | Description | QTY |
|---|---|---|
| A | Wire Connector | 2 |
| B | mounting Screw | 3 |
Installation instruction
Step 1:
Unscrew the Canopy Nuts(F) from the Mounting Plate(D).
Step 2:
- Place Metal Cup(S) on Metal Connector(R) and secure Metal Sleeve(T) into Metal Connector(R).
- Attach Elbow Pipe(O) on Fixture(K) and secure Hexnuts (L), Spring Washer(M) into the lip of Elbow Pipe(O), then secure Hexnuts (L) with Allen Wrench(M).
- Secure Metal Plate(Q) into Elbow Pipe(O) with Screw(P).
Step 3:
- Open the Janitors from Wiring Terminal(U).
- Insert the white/black wire into the hole of Wiring Terminal(U), then close the Janitors.
- Place Metal Cap(W) on Threaded Pipe(V) and secure with Finial(X).
Step 4 :
- Secure Middle Metal Tube(I), Large Metal Tube(H), Small Metal Tube(G) into Lip(J) in order.
- Secure Joint(Y), Canopy(E) into Small Metal Tube(G).
Step5:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Mooting Secure the Mounting Plate (D) by lightning 2 Screw (C) with a screwdriver.
Step6:
Connect the white wire of the fixture to the white wire of the supply circuit.
Connect the black wire of the fixture to the black wire of the supply circuit.
Connect the Ground fixture wire with the Ground J-Box wire, with the Wire
Connector(A) .
Step7:
- Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy nuts(F).
Step 8:
Install bulbs(not included) into the Socket.
CUSTOMER SUPPORT
Dear customer,
Thank you for choosing Our Lighting. If you have any concerns or questions
about our products, please do not hesitate to contact us directly. We’ll
provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: nikki@doraimilight.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>