EUGAD H2-M-A2814 Food Dispenser Instruction Manual
- June 17, 2024
- Eugad
Table of Contents
- EUGAD H2-M-A2814 Food Dispenser Instruction Manual
- Specifications
- Appliance Overview
- Package Contents
- Assembly
- Cleaning Instructions
- Operation Instructions
- Timer Setting
- Meal Setting
- Notes
- Troubleshooting
- A: Food does not come out, or kibbles get jammed, or there is lack of
- B: It does not work after connecting to the power supply.
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EUGAD H2-M-A2814 Food Dispenser Instruction Manual
Specifications
Name of appliance: smart pet feeder Model number: PTM-103 (with buttons)
Colour: white+galvanised
Overall dimensions: 335330177mm Capacity: 4L
Net weight: 1230g
Packaging dimensions: 194.5194.5349.5mm Gross weight: 1670g
Materials: ABS+SS304 Power supply: 5V DC/1A
Dry battery compatibility: 4* AA batteries (not included)
Appliance Overview
- Lid
- Desiccant Box
- Visible Window
- Food Chute
- Stainless Steel Bowl
- Plastic Bowl Holder
- Lid Button
- Main Body
- Buttons
- Display Screen
- Dry Battery Compartment
- Dismantling Switch
- Bottom
- Cable Compartment
- Agitator
Package Contents
Assembly
-
Open the lid and add food
Press the button on the back to open the lid, and add food (suitable for kibbles with a diametre of 4-12mm). -
Place the desiccantOpen the desiccant box and remove the packaging of the desiccant, then put the desiccant in place and cover it up.
-
Put the stainless steel bowl into the plastic bowl holder and it’s
-
Fix the bowl to the main body Place the bowl on a flat surface and place the main body downwards as shown.
-
Connect to power supply
Plug the power cable into the type-C charging port on the bottom of the main body.
Cleaning Instructions
Disconnect the plug and power cable before cleaning.
Open the lid, empty the hopper, place the appliance upside down, open the dry
battery compartment and turn the dismantling switch to .
Lift the base upwards to separate the hopper and the disassembly is completed.
(The hopper and the agitator are washable while the base, non-washable, should
be wiped clean with a damp or dry cloth.)
After cleaning, turn the hopper upside down, tilt the agitator and put it into
the hopper when the outlet aligns to the food chute of the base, then position
the base in place via the corresponding slots at 4 corners.
Turn the dismantling switch to to secure the base to the hopper and cover the
lid of the dry battery compartment.
Operation Instructions
Timer Setting
Press and hold ( ) for 3 seconds to unlock timer setting. Set timer as
following.
Press ( ) to confirm and go to next step, press ( ) or ( ) to adjust
Meal Setting
-
Press ( ) to set the feeding time of the 1st meal, press ( ) or () to adjust
-
Press ( ) to set the feeding portion of the 1st meal, press ( ) or () to adjust (1-60).
-
Repeat the above steps to set the 2nd-6th meal if needed, press ( ) to confirm and finish setting or wait for 10 seconds to exit setting automatically
Notes
Recommended for pets over 3 months of age.
Recommended for indoor use. Keep the appliance away from direct sunlight and
fire.
Please use the original power adapter, otherwise it may cause damage to the
appliance or malfunction.
No immersing in water or rinsing.
To prevent pets from pushing over the appliance, it is recommended to be used
against a wall.
Use by children: only under adult supervision.
Please do not soak the desiccant in water. If there is any breakage, do not
use.
If moving or no longer using the appliance, please unplug it and remove the
batteries from the bottom.
Do not disassemble and repair the appliance except for maintenance personnel
to avoid accidental injury.
Troubleshooting
A: Food does not come out, or kibbles get jammed, or there is lack of
food.
Please check if there is enough food left.
Please make sure it is dry food used. The appliance is applicable for dry food
only.
Please check if there is too much food piling up by the chute, in which case,
decrease the feeding portions.
If it’s jammed, please clean out the hopper and make sure it’s not jammed
before attempting to use it again.
B: It does not work after connecting to the power supply.
Please check if the plug is connected properly.
Please check if the type C plug is reliably connected. Please check if the
display screen illuminates normally.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>