Eugad 4L Automatic Cat Food Dispenser Instruction Manual
- June 13, 2024
- Eugad
Table of Contents
| Installation Manual
Specifications
Name of appliance: smart pet feeder
Model number: PTM-103 (with buttons)
Colour: white+galvanised
Overall dimensions: 335330177mm
Capacity: 4L
Net weight: 1330g
Packaging dimensions: 194.5194.5349.5mm
Gross weight: 1770g
Materials: ABS+SS304
Power supply: 5V DC/1A
Dry battery compatibility: 4* AA batteries (not included)
Appliance Overview
- Lid
- Desiccant Box
- Visible Window
- Food Chute
- Stainless Steel Bowl
- Plastic Bowl Holder
- Lid Button
- Main Body
- Buttons
- Display Screen
- Dry Battery Compartment
- Dismantling Switch
- Bottom
- Cable Compartment
- Agitator
Package Contents
Main Body 1 Double Bowl 1 Adapter *1
Power Cable 1 Desiccant 1 User Manual *1
Assembly
1. Open the lid and add food
Press the button on the back to open the lid, and add food (suitable for
kibbles with a diametre of 4-12mm).
2. Place the desiccant
Open the desiccant box and remove the packaging of the desiccant, then put the
desiccant in place and cover it up.
3. Place the bowls on a flat surface and fix the splitter into Bowl A as shown.
4. Fix Bowl B via the slot from bottom to top.
5. The assembly of the double bowl is completed.
6. Fix bowls to the main body
Place the bowls on a flat surface and place the main body downwards as shown.
7. Connect to power supply
Plug the power cable into the type-C charging port on the bottom of the main
body.
Cleaning Instructions
- Disconnect the plug and power cable before cleaning.
- Open the lid, empty the hopper, place the appliance upside down, open the dry battery compartment and turn the dismantling switch to .
- Lift the base upwards to separate the hopper and the disassembly is completed. (The hopper and the agitator are washable while the base, non-washable, should be wiped clean with a damp or dry cloth.)
- After cleaning, turn the hopper upside down, tilt the agitator and put it into the hopper when the outlet aligns to the food chute of the base, then position the base in place via the corresponding slots at 4 corners.
- Turn the dismantling switch to to secure the base to the hopper and cover the lid of the dry battery compartment.
Wipe Clean Only Washable Washable
Washable
Operation Instructions
- Lock/Unlock
- Battery Level
- When it reads “E” – feeding malfunction
- Short press to manually feed once
- Press and hold for 3 seconds to start/cancel the feeding schedule
- Press to return to the previous step
- Meal (1-6)
- Portion (1-60)
- Time (24 hours format)
Timer Setting
- Press and hold ( ) for 3 seconds to unlock timer setting.
- Set timer as following.
- Press ( ) to confirm and go to next step, press ( ) or ( ) to adjust.
Meal Setting
1. Press ( ) to set the feeding time of the 1st meal, press ( ) or ( ) to adjust.
2. Press ( ) to set the feeding portion of the 1st meal, press ( ) or ( ) to adjust (1-60).
3. Repeat the above steps to set the 2nd-6th meal if needed, press ( ) to confirm and finish setting or wait for 10 seconds to exit setting automatically.
Notes
- Recommended for pets over 3 months of age.
- Recommended for indoor use. Keep the appliance away from direct sunlight and fire.
- Please use the original power adapter, otherwise it may cause damage to the appliance or malfunction.
- No immersing in water or rinsing.
- To prevent pets from pushing over the appliance, it is recommended to be used against a wall.
- Use by children: only under adult supervision.
- Please do not soak the desiccant in water. If there is any breakage, do not use.
- If moving or no longer using the appliance, please unplug it and remove the batteries from the bottom.
- Do not disassemble and repair the appliance except for maintenance personnel to avoid accidental injury.
Troubleshooting
A: Food does not come out, or kibbles get jammed, or there is lack of food.
- Please check if there is enough food left.
- Please make sure it is dry food used. The appliance is applicable for dry food only.
- Please check if there is too much food piling up by the chute, in which case, decrease the feeding portions.
- If it’s jammed, please clean out the hopper and make sure it’s not jammed before attempting to use it again.
B: It does not work after connecting to the power supply.
- Please check if the plug is connected properly.
- Please check if the type C plug is reliably connected.
- Please check if the display screen illuminates normally.
–––––––––––––
B0BCVZG18Q
Points de collecte
surwww.quefairedemesdechets.fr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>