iClimb IC102 Waterproof Sun Shield Tarp Instructions
- June 17, 2024
- iClimb
Table of Contents
iClimb IC102 Waterproof Sun Shield Tarp
INSTRUCTION
- Spread out the tarp, connect the poles prepared (2 poles needed)
- 1,2 Triangle grommet
- Put a pole in the middle triangle grommet 0 of an adjacent side of the tarp; then stake down and tension the pole’s guy line, then put the other pole in the other opposite triangle grommet ®; then stake down and lightly tension the pole’s guy line.
- Stake down the four corners of the tarp, tension (retension) guy lines until your shelter is taut.
Diagrams Description
- The first diagram illustrates a tarp laid out flat with poles connected at both ends, indicating the need for two poles.
- The second diagram shows a pole being inserted into a triangle grommet on one side of the tarp, with tensioning of the guy lines.
- The third diagram depicts the tarp with poles erected and the four corners staked down, showing the tarp is taut.
Specifications
| Product | Tarp IC102 |
|---|---|
| Poles Required | 2 (not included) |
| Key Components | Triangle grommets for pole insertion |
FAQ
- What do I need to set up the Tarp IC102?
- You will need two poles (not included with the tarp) to set up the Tarp IC102.
- How do I secure the poles to the tarp?
- Insert the poles into the triangle grommets located at the middle of the adjacent sides of the tarp and use the guy lines to tension and secure them.
- How can I ensure the tarp is taut?
- Stake down the four corners of the tarp and adjust the tension of the guy lines until the shelter is taut.
Read User Manual Online (PDF format)
Loading......