KungFuWood GYJ504 Cactus Coat Rack Instruction Manual

KungFuWood GYJ504 Cactus Coat Rack

Product Information

Specifications:

• Item No.: GYJ504
• Name: 504 Cactus Coat Rack
• Baseplate 1 Size: 39530020MM
• Baseplate 2 Size: 3389520MM

Product Usage Instructions

Step 1: Assemble the base plate

1. Join base plate 1 and base plate 2 together.
2. Use hexagon socket screw (A) and flat gasket (B) to secure the base plates.

Step 2: Fix the bold lower column onto the base plate.

1. Insert hexagonal screw (A) and spacer (B) through base plate 1.
2. Attach and tighten the bold lower column (7) using a hexagon wrench (G).

Step 3: Install the mid-lower column

1. Insert hexagonal screw (A) and spacer (B) through base plate 1.
2. Fix the mid-lower column (6) onto the bold lower column (7).
3. Tighten using the L-shaped hexagonal spanner (G).

Step 4: Install the mid-upper column

1. Secure the mid-upper column (4) onto the mid-lower column (5).
2. Tighten using hexagonal overmoulding wire (C) and an L-shaped hexagonal spanner (F).

Step 5: Install the hangers

1. Attach hanger (8) to the columns using a hexagon socket head screw (E).
2. Tighten using an L-shape hexagon wrench (F).

Step 6: Install foot pads

1. Stick the foot pad (H) onto the base plate for stability.

FAQ:

• Q: What should I do if I find missing parts during assembly?
  A: If you find any missing parts, please contact our customer service for assistance. It is important to have all parts for proper assembly.

• Q: Can the coat rack be disassembled for storage or transportation?
  A: Yes, you can disassemble the coat rack following the assembly steps in reverse for storage or transportation purposes.

Caution: (Installed) in the parts table and hardware table means that it has been installed in the finished product, and is not in the hardware bag!!!

List of Parts

List of Hardware

INSTALLATION INSTRUCTION

• Step 1: Assemble the base plate
  Caution:

1. After unpacking, please check the correct number of accessories against the instructions first.
2. As illustrated, first put the base plate 1 (1) and the base plate 2 (2) together, then use the hexagonal socket wire (D) to pass through the side holes and use the L-shaped hexagonal spanner （F) to fix and tighten.

• Step 2: Fix the bold lower column onto the base plate.
  Insert the hexagonal screw (A) and spacer (B) G through the base plate （1）as shown in the illustration, i lien fix the bold lower post, (7) and tighten it with the I. shaped hexagonal spanner (G).

• Step 3: Install the mid-lower column
  Tighten the lower post (6) into the thickened lower post in a clockwise direction as shown in the diagram.

• Step 4: Install the mid-upper column
  As illustrated, secure the lower and middle columns (5) and the upper and middle columns (4) and the upper column (3) in turn with the hexagonal over- moulding wire (C) and the L-shaped hexagonal spanner (F). Note that the columns are 7, 6, 5, 4, 3, from bottom to top.

• Step 5: Install the hangers
  As illustrated, fix hanger (8) to column using the hexagon socket head screw (E) and fasten it using L-shape hexagon (F).
  (Note: When installing the tabs, screw from the large hole into the small hole. )

• Step 6: Install foot pads
  As illustrated, stick the foot pad (H) onto the base plate and finish the installation.

This product has passed the wood inspection and paint inspection in full compliance with the national quality inspection standards. After passing the factory, it will be released from the factory and sold after confirming that the packaging is intact.
For better service, please feel free to give us your opinions on after-sales service.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>