KungFuWood GYJ506 Rotary Coat Rack Instruction Manual
- June 17, 2024
- KungFuWood
Table of Contents
Illustration of Installation
Item No. | GYJ506 |
---|---|
Name: | 506 Rotary Coat Rack |
Caution: (Installed) in the parts table and hardware table means that it has been installed in the finished product, and is not in the hardware bag!!!
List of Parts
No. | Name | Graph | Size | Amount |
---|---|---|---|---|
A | A Column*4 | 30*1560MM | 1 | |
B | B Column*4 | 30*1430MM | 1 | |
C | C Column*4 | 30*1300MM | 1 | |
D | Base 1 | 39031033MM | 1 | |
E | Base 2 | 3158015MM | 2 | |
F | Laminate | 296*17MM | 2 | |
G | Handle | 26*120MM | 9 |
List of Hardware
No. | Name | Graph | Size | Amount |
---|---|---|---|---|
1 | Hexagon socket screw | M8*30MM | 4 | |
2 | Hexagonal overmoulding wire | M7*50MM | 11 | |
3 | Hexagon wrench | M5*57MM | 1 | |
4 | Hexagon wrench | M4*57MM | 1 | |
5 | Nonwoven fabric pad | ∅20*3MM | 5 |
This product has passed the wood inspection and paint inspection in full
compliance with the national quality inspection standards. After passing the
factory, it will be released from the factory and sold after confirming that
the packaging is intact.
For better service, please feel free to give us your opinions on after-sales
service.
Name: | Wood Furniture |
---|---|
Qualification: | Pass |
Grade: | Class 1 |
Standard:
GB/T 3324
GB/ 18584
Required Workers
Inspector
QC 02
Step 1: Install the base plate.
Step 2: Install the base plate and A1, B1, C1.
Secure the base plate to A1, B1 and C1 by passing the hexagonal screw (1)
through the hole in the base plate.
(Note: it is not necessary to screw too tightly first, in order to facilitate
the adjustment of the holes when installing the laminate later.)
Step 3: Install the base plate and A2, B2, C2.
Align the poles A2/B2/C2 with A1/B1/C1 and turn them to tighten.
(Note: the 3 poles (A/B/C) with the same letter form one column, and the
installation order is A1-A2-A3-A4,B1-B2-B3-B4,C1-C2-C3-C4. Please tighten
every joint.)
Step 4: Install the first layer of laminates
Follow the diagram: Fasten the laminate (F) with the hexagonal overmount wire
(2) hexagonal spanner (4).
(Note: install with the large holes facing outwards and the small holes facing
inwards)
Step 5: Tighten the bottom screw of the base plate
Tighten the bottom screw of the base plate after installing all the columns and laminate.
Step 6: Install column A3, B3, C3
Step 7: Install the second layer of laminates
Fasten the laminate (F) with the hexagonal overmoulding wire (2) hexagonal
spanner (4).
(Note: install with the large holes facing outwards and the small holes facing
inwards)
Screw the posts A3/B3/C3 against A2/B2/C2 by turning them.
Step 8: Install column A4, B4, C4
Screw the posts A4/B4/C4 against A3/B3/C3 by turning them.
Step 9: Install the handles
Fix all handles (G) onto the column as illustrated.
Step 10: Install the foot pad
As illustrated, stick the foot pad (5) on the bottom surface of the bottom plate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>