SAUDER 421434 International Lux Bookcase Bookshelf Instruction Manual

CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.

421434 International Lux Bookcase Bookshelf

Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday – 8:30 a.m. to 5 p.m. EST (except holidays)

Here’s one for the books.

Bookcase
International Lux Collection | Model 421434
Sauder.com

Share your journey!

http://qr.sauder.com/default.aspx?ID=404

NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Lot # 548017
06/02/20
Purchased: __

Assembly Tools Required

| No. 2 Phillips Screwdriver
Tip Shown Actual Size
---|---
| Pencil
| Electric drill with 1/8″ or 3/8″ bit
(ONLY in indicated step)

Hardware Identification

Screws are shown actual size. You may receive extra hardware with your unit.

1. GOLD 1″ FLAT HEAD SCREW – 8

2. GOLD 1/2″ ALLEN HEAD SCREW – 8

3. GOLD 1/2″ FLAT HEAD SCREW – 20

4. ALLEN WRENCH – 1

5. FURNITURE TIPPING RESTRAINT KIT – 1

Part Identification

While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar parts from each other. Use this part identification to help identify similar parts.

www.sauder.com/service

Step 1

Assemble your unit on a carpeted floor or on the empty carton to avoid scratching your unit or the floor.
Fasten the TOPS (B and C) to the TOP BRACES (D).
Tighten four GOLD 1/2″ ALLEN HEAD SCREWS (2) using the ALLEN WRENCH (4).

Step 2
Fasten the ENDS (A) to the TOPS (B and C). Tighten four GOLD 1/2″ ALLEN HEAD SCREWS (2) using the ALLEN WRENCH (4).

Step 3
Insert one of the TOP/BOTTOM SHELVES (E) through the ENDS (A).
Fasten the TOP/BOTTOM SHELF (E) to the ENDS (A). Use four GOLD 1″ FLAT HEAD SCREWS (1).

Step 4
Insert the SHELVES (F) through the ENDS (A).
Fasten the SHELVES (F) to the ENDS (A). Use twelve GOLD 1/2″ FLAT HEAD SCREWS (3).

Step 5
Insert the remaining TOP/BOTTOM SHELF (E) through the ENDS (A).
Fasten the TOP/BOTTOM SHELF (E) to the ENDS (A).
Use four GOLD 1″ FLAT HEAD SCREWS (1).

Step 6
Fasten the REAR BRACES (G) to the ENDS (A). Use eight GOLD 1/2″ FLAT HEAD SCREWS (3).
NOTE: The tabs on the REAR BRACES must face up so the REAR BRACES rest down inside the ENDS.

Step 7
Carefully stand your unit upright against the wall in its final location.
1st- Use the FURNITURE TIPPING RESTRAINT KIT (96) for added stability. Fasten the strap to the back edge of the REAR TOP (C) using the short screw as shown.
The following instructions show your unit being fastened to a wall stud. If you are not fastening your unit to a wall stud, go to the next step now.
2nd- Locate the center of a stud in your wall near your unit and mark it with a pencil.
3rd- Next, drill a 1/8″ hole on the mark and into the stud in your wall.
4th- Fasten the unit to the wall. Use the long screw through the other end of the strap and into the 1/8″ hole.

If you’re doing this to help a friend, don’t leave without a bite.

Step 8
1st- With your pencil, strike a mark through the center of the hole in the SAFETY STRAP.
2nd- Drill a 3/8″ hole on the mark.
3rd – While you squeeze the wings together, gently tap the WALL ANCHOR from the FURNITURE TIPPING RESTRAINT KIT (96) into the hole until it is even with the surface of the wall.
4th – Turn the LONG SCREW through the hole in the SAFETY STRAP and into the WALL ANCHOR.
NOTE: You will need to turn the LONG SCREW multiple turns to completely tighten and secure your unit to the wall.

Step 9
Caution
Tempered safety glass is used. It is stronger than normal glass, and it will not break into long, sharp, knife-like shards. However, safety glass can break. When safety glass breaks, it instantly fractures into small, bead-like pieces. These small pieces may have  sharp edges.
For your safety, follow these precautions when you assemble your product:

• Wear safety glasses or other eye protection.
• Do not try to drill into or cut safety glass. It will instantly break into small pieces.
• Do not force the glass into position.
• If the glass breaks, be careful when you pick up the pieces. They may have sharp edges.
  Insert the GLASS SHELVES (H) into your unit so they rest on the SHELVES (E and F).

Step 10
NOTE: Please read the back pages of the instruction booklet for important safety information.
This completes assembly. Clean with a damp cloth. Wipe dry.
And to celebrate, why not share your success story at sauder.com or

WARNING
Please use your furniture correctly and safely. Improper use can cause safety hazards, or damage to your furniture or household items. Carefully read the following chart.

• Overloaded shelves.
• Improper loading can cause the product to be top-heavy.| • Risk of injury.
• Top-heavy furniture can tip over.
• Overloaded shelves can break.| • Never exceed the weight limits shown in the instructions.
• Work from bottom to top when loading shelves. Place the heavier items on the lower shelves.
• Improperly moving furniture that is not designed and equipped with casters.| • Furniture can tip over or break if improperly moved
• Physical injury. Furniture can be very heavy.| • Unload shelves from top to bottom before moving the furniture.
• Do not push furniture, especially on a carpeted floor. Have a friend help you lift the item and set it in place.
• This unit must be positioned against a wall.
• Children climbing on the shelves can cause the product to tip.| • Risk of injury or death.| • Do not allow children to climb on the shelves. Avoid placing items like toys or candy on upper shelves.
• Use the supplied tipping restraint kit for added stability.
• Placing TVs on furniture items that are not designed to support a television is hazardous.| • Risk of injury or death. TVs can be very heavy. Plus the weight and location of the picture tube tends to make TVs unbalanced and prone to tipping forward.| • This product is not designed to support a television.

5-YEAR LIMITED WARRANTY

1. Sauder Woodworking Co. (Sauder®) provides limited warranty coverage to the original purchaser of this product for a period of five years from the date of purchase against defects in materials or workmanship of Sauder furniture components.
   As used in this Warranty, “defect” means imperfections in components which substantially impair the utility of the product. This Warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

2. There is no warranty coverage for defects or conditions that result from the failure to follow product assembly instructions, information or warnings, misuse or abuse, intentional damage, fire, flood, alteration or modification of the product, or use of the product in a manner inconsistent with its intended use, nor any condition resulting from incorrect or inadequate maintenance, cleaning, or care. There is also no warranty coverage for rented products or any products purchased “used” or “as is”, at a  distress or going-out-of business sale, or from a liquidator.

3. As the exclusive remedy under this Warranty, Sauder will (at its sole option) repair, replace or refund the value of any defective furniture component. Sauder may require independent confirmation of the claimed defect and proof of purchase. Replacement parts will be warranted for only the remaining period of the original Warranty. SAUDER SHALL HAVE NO LIABILITY for ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND and all such damages are EXCLUDED FROM THIS  WARRANTY, such as loss of use, disassembly, transportation, labor or damage to property on or near the product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not  apply to you.

4. This Warranty applies only to warranted defects that first arise and are reported to Sauder within the warranty coverage period. The Warranty cannot be transferred to subsequent owners or users of the product, and it shall be immediately void in the event the product is resold, transferred, leased or rented to any third party or person other than the original purchaser.

5. THERE ARE NO OTHER WARRANTIES APPLICABLE TO THIS PRODUCT. Under the laws of certain states, there may be no implied warranties from Sauder and all implied warranties, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE are disclaimed where allowed by law.
   TO THE EXTENT ANY IMPLIED WARRANTIES ARE APPLICABLE, ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO  THE DURATION OF THIS EXPRESS WARRANTY or the minimum period allowed by law, whichever is shorter. Some states do not allow limitations on how long an implied Warranty lasts, so the above limitation may not apply to you.

6. For Warranty inquiries or claims, please visit our website www.sauder.com. You can also contact Sauder at 1.800.445.1527. Sauder may require Warranty claims to be submitted in writing to: Sauder Woodworking Co., 502 Middle Street, Archbold, OH  43502 USA. Please include your sales receipt or other proof of purchase and a specific description of the product defect.

CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.

Dear Valued Customer:
Thanks so much for choosing Sauder® furniture. I hope the purchase and assembly process was a positive experience and you feel good about the furniture you just built.
My grandfather, Erie Sauder, founded the company in 1934 and later invented and patented the first commercially successful ready-to-assemble tables. We strive to hold true to his core values of innovation, integrity, servanthood and stewardship.
Sauder products are made with environmentally responsible materials and world- class manufacturing processes. Our 2,000+ dedicated employees in Archbold, Ohio, along with our global manufacturing partners, are committed to providing you furniture with  great value, style and quality.
From our family to you. Enjoy!

Kevin J. Sauder
President/CEO

Register your new product online

http://qr.sauder.com/default.aspx?ID=2547

For immediate service, our website is available 24 hours per day, 7 days per week, to order replacement parts, access assembly tips, register your product and view Sauder products. www.sauder.com/service

So, how did it go?
Set a world record for speed?
Feeling good about yourself?
Nice. Get social with it on any of these quality share sites.

http://qr.sauder.com/default.aspx?ID=404

If you need assistance or want to learn more, please contact our award- winning, Ohio-based customer service team at
1-800-445-1527 Monday-Friday – 8:30 a.m. to 5 p.m. EST (except holidays) or at sauder.com/service.
And don’t forget to rate and review your piece at Sauder.com in the product detail page.http://qr.sauder.com/default.aspx?ID=5537

General Conformity Certificate

1. This certificate applies to the Sauder Global Sourcing Product identified by this Instruction Book.

2. This certificate applies to compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303).

3. This product is manufactured for:
   Sauder Woodworking Company
   502 Middle St.
   Archbold, OH 43502
   419-446-2711

4. Date of Manufacture: __

References

• Bedroom, Living Room and Office Furniture — Sauder Furniture Homepage
• Bedroom, Living Room and Office Furniture — Sauder Furniture Homepage
• Bedroom, Living Room and Office Furniture — Sauder Furniture Homepage
• Customer Service

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>