hygger HG951 ECO Slim Wave Maker Instruction Manual

June 17, 2024
hygger

hygger HG951 ECO Slim Wave Maker Instruction Manual

hygger HG951 ECO Slim Wave Maker Instruction.jpg

Please read this manual carefully before using and  follow strictly in accordance with the manual

CONTACT INFORMATION:
Distributed by: Hygger Aquarium, Inc.
13941 Magnolia Ave, Chino, CA 91710

Contact us at www.hygger-online.com
Email: mago@hygger-online.com

Trademarks of Shenzhen Mago Trading Co., Ltd
Bantian Group Business Center, Longgang,
Shenzhen City, China
All Rights Reserved
Made in China

FIG 1 CONTACT INFORMATION.JPG

FIG 2.JPG

Installation

Place wave pump at least 15-20 cm below water level. With the magnet base mounted outside of tank, the wave maker can be moved to desired position. Please note that magnet can be also placed underwater.

FIG 3 Installation.JPG

CONTROL PANEL

FIG 4 CONTROL PANEL.JPG

hygger HG951 wave maker runs differently according to five time ranges of Dawn, Sunrise, Daylight, Sunset and Moonlight. Each time range, its the wave mode, intensity and wave frequency can be programmed

There are 4 digits number on the controller which represents time zones/intensity/wave mode/frequency.
You can program each time zone’s intensity wave mode and frequency.
• S button allows you to switch between the time and the settings.

FIG 5 CONTROL PANEL.JPG

FIG 6 CONTROL PANEL.JPG

FIG 7 CONTROL PANEL.JPG

FIG 8 CONTROL PANEL.JPG

FIG 9 CONTROL PANEL.JPG

INSTRUCTION

FIG 10 INSTRUCTION.JPG

To begin with time zone 1, Dawn from 05:30 to 07:30.

Press S button to get to the time. Press S again to switch to setting. Then press M, the first digits flashes. Push +button until 1 comes up. Press M again, second digits flashes. Push + button to set intensity until 4 comes up. Press M again, third digits flashes.
Push + button to set wave mode until 1 comes up. Press M again, Fourth digits flashes. Push + button to set wave mode until 1 comes up.

Then you need to set time zone 2, Sunrise

Press S button to get to the time. Press S again to switch to setting. Then press M, the first digits flashes. Push +button until 2 comes up. Press M again, second digits flashes. Push + button to set intensity until 4 comes up. Press M again, third digits flashes. Push + button to set wave mode until 1 comes up. Press M again, Fourth digits flashes. Push + button to set wave mode until 1 comes up.

Other time zones are the same steps. Once you finish the setting of 5 time zones, you can let it go.

Note:

  1. when random mode is selected, intensity and frequency are unable to be programmed. For example, 1040, 2040, 3040, 4040, 5040
  2. When constant stream mode is selected, frequency is unable to be programmed. The default frequency of constant stream mode is 8, the slowest. For example, 51 38, 5238, 5338, 5438.
  3. Controller is not waterproof. Please keep it dry.
  4. Please ensure wave pump is fully submerged

3. Feeding Mode Setting:

Press the F button to automatically stop for 10 minutes feeding. Resumes to previous setting after 10 minutes.

Parameter

FIG 12 Parameter.JPG

Ma1ntenance

Please clean the wave pump monthly in case clogged up.

Step 1: Unplug the power and take it out of water.
Step 2: pry off the fan with a screwdriver and pull out the post with pliers.

Step 3: prod around the motor fan In few circles.

Step 4: Put it back and plug in power.

Troubleshooting

FIG 15 Troubleshooting.JPG

E-mail: Mago@hygger-online.com

Warranty

  1. This product MUST be purchased from an authorized hygger reseller. Visit our website for a list of authorized resellers. hygger warrants this product against defects in materials and workmanship for ON E(l) YEAR from the date of the original retail purchase and is non-transferable.
  2. Warranty on all products, including aquariums. But it is limited to the replacement of the products and does not cover fish loss, personal injury, property loss or direct, incidental or consequential damage caused by using this product.
  3. Note: hygger One-year Limited Warranty does not cover damage caused by the followings: improper installation, saltwater  corrosion, electrical surges or modifications.
  4. If you discover a defect, please contact hygger, who will, at its option, repair or replace the product at no charge, provided that you return it during the warranty period. A copy of the bill of sale is required as proof of the original purchase date in the event of the product needing repairs within the warranty period. hygger does not warrant any products that are not hygger’s.
  5. This warranty does not apply if the product has been damaged by accident, abuse, misuse or misapplication, or modified without the written permission of hygger.

Disposal

Do not dispose this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary. This product must not be disposed together with the domestic waste. This product has to be disposed at an authorized place for recycling of electrical and electronic appliances. By collecting and recycling waste, you help save natural resources, and make sure the product is disposed in an environmental friendly and healthy way.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals