Mxmoonfree 19 Quart Lab Autoclave Sterilizer Instructions
- June 17, 2024
- Mxmoonfree
Table of Contents
Mxmoonfree 19 Quart Lab Autoclave Sterilizer
For more information on troubleshooting and temperature calibration, please refer to the user manual.
STRUCTURE
THE KEYS OF TIMER
- It is forbidden to set the timer by rotating counterclockwise otherwise the timer may be damaged.
- The timer will only start when the sterilizer reaches the set temperature (Yellow light on).
- The sterilizer will stop heating and play music at the end of the cycle, please disconnect the power in time.
YOU MAY CONCERN
- There may be water stains left on the heating element and the bottom, which may be traces of factory testing, no need to worry.
- The locking device on the lid will work at 100 degrees Celsius (212F), and, normally, steam may come out at the beginning of heating
OPERATION VIDEO
How to use it?
Scan this QR code to Youtube
TROUBLESHOOTING
HOW COULD I GET REPLACEMENT PARTS?
Q&A
Q: How could I get replacement parts?
A: Please contact us at
mxmoonfree2021@outlook.com and we will
provide accessories. Please note the heating element is consumable and we will
charge it after repeated supplies.
Q: What is the recommended temperature (pressure) setting?
A: Temperature at 120-125 degrees C (248-257 degrees F). ft/I
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>