Miele G 7197 SCVi XXL AD 125 Fully Integrated Dishwasher Installation Guide
- June 17, 2024
- Miele
Table of Contents
Miele G 7197 SCVi XXL AD 125 Fully Integrated Dishwasher
Product Specifications
- Model Number: M.-Nr. 12 366 480 / 00
- FrontFit Function
- Front Panel Weight: Refer to Miele website for specific dishwasher model
- Installation Type: Fully integrated dishwashers with FrontFit
Tools
Dimensions
Product Usage Instructions
Pre-Installation Preparation
Before installing the dishwasher, ensure you have read the operating instruction manual provided.
Front Panel Installation
- Set the door springs equally on both sides after fitting the front panel.
- Refer to the technical data on the Miele website for the minimum and maximum weight of the front panel.
Venting the Water Drain
If the drainage connection is lower than the guide path for the lower basket rollers, vent the drainage system.
If the on-site drainage connection is situated lower than the guide path for the lower basket rollers in the open door, the drainage system must be vented.
Installation sheet for fully integrated dishwashers with FrontFit / fitted in a run of units
To avoid the risk of accidents or damage to the dishwasher please observe this installation sheet and read the operating instruction manual supplied with it before it is installed or used for the first time.
Frequently Asked Questions (FAQ)
Q: Where can I find the weight specifications for the front panel?
A: The minimum and maximum weight of the front panel can be found in the technical data on the Miele website specific to your dishwasher model.
Q: Why is it important to set the door springs equally after fitting the front panel?
A: Setting the door springs equally ensures proper balance and operation of the dishwasher door.
Q: What should I do if the drainage connection is lower than the guide path for the lower basket rollers?
A: In such cases, it is necessary to vent the drainage system to ensure proper water flow and drainage.+