GoldenEar BRX Bookshelf Referench X Stand Mount Speaker Owner’s Manual

GoldenEar BRX Bookshelf Referench X Stand Mount Speaker Owner’s Manual

Bookshelf Reference X Owner’s Manual

Congratulations!

Congratulations and thank you for purchasing GoldenEar Technology’s® BRX speakers! You are about to hear the spectacular difference these very special speakers will make in your music and/or home theater system! Our engineers’ many years of experience in developing loudspeakers has led to this extraordinary product. In order to ensure that you experience maximum performance, please take a moment to fully read this owner’s manual and familiarize yourself with the unique installation, assembly and set-up procedures for your BRX speakers. Please visit our website at www.GoldenEar.com for more information on the technology behind your new speaker system. If you have additional questions, contact your Authorized GoldenEar Technology® Dealer or visit the
Q&A page in the Tech Support section of our website.

Your New GoldenEar Speakers

GoldenEar BRX speakers are designed to fi t beautifully in a wide variety of applications. Their compact dimensions allow for easy installation in many locations within your home. To get the best performance possible and for a product that lasts a lifetime, we strongly recommend that you follow the placement and setup guidelines provided in this manual.

Your New GoldenEar Speakers

GoldenEar BRX speakers are designed to fi t beautifully in a wide variety of applications. Their compact dimensions allow for easy installation in many locations within your home. To get the best performance possible and for a product that lasts a lifetime, we strongly recommend that you follow the placement and setup guidelines provided in this manual.

Cleaning

Do not use a strong or abrasive cleaner on your new speakers. Clean them only with a damp cloth, but do not
get them wet. Do not set wet objects on top of the speakers as they may damage the enclosure

Preventing Speaker Damage

USE AN APPROPRIATE AMPLIFIER. At high volumes a very powerful amplifi er can overdrive your speakers and damage them. And if the amplifi er is not powerful enough, it can produce distortion
that can easily damage your speaker. (Consult your dealer for assistance.)

DON’T BE FOOLED BY YOUR RECEIVER’S VOLUME CONTROL. It only adjusts how loud, it is not an  indication of power output. If your speakers begin to sound harsh or grating or if you hear other forms of distortion, turn down the volume immediately!

PROPER SETUP IS THE KEY. Please Note: Avoid use of tone controls and loudness controls as they will
demand even more power from an amplifi er.

GoldenEar Technology BRX speakers are effi cient and can be driven to loud listening levels with moderate amplifi er power. They are also able to handle the output of very powerful amplifi ers. To prevent damage to your speakers, please read all of the following guidelines before hooking them up

Amplifi er Distortion — #1 Threat to your New Speakers!

Amplifi er distortion is the principal cause of speaker damage. When listening at loud levels your amplifi er may run out of clean power. It will then begin to produce speaker-damaging distorted power. This will damage any brand of speaker very quickly! More powerful amplifi ers are actually safer – For example: A 40 Watt/channel amplifi er will have substantial distortion above 40 Watts. If driven to 50 Watts, this amplifi er will deliver speaker-damaging distorted power! But a 100 Watt/channel amplifi er will have very low distortion below 100 Watts. Therefore, when the speaker requires 50 Watts, this more powerful amplifi er will deliver clean power and speaker damage is less likely to occur. (See your GoldenEar Technology dealer for amplifi er recommendations.)

Volume Setting

Do not be fooled by the Volume setting of your receiver/preamplifi er. It only adjusts listening level — it is not a “power-output” dial. The amount of amplifi er power actually used at a given Volume setting depends solely on the nature of the source material you are listening to (at a given Volume setting a quiet section of music will use less amplifi er power than a loud section). With typical material, the rated output power of many receivers/ amplifi ers is often reached when the Volume is set to around -10dB, or between the “11” and “1 o’clock” settings with an analog control (with bass/ treble and loudness controls not used — otherwise rated power may be reached at even lower Volume settings). Remember, all amplifi ers produce distortion when operated beyond their rated output power. The resulting distortion will damage all speakers! If you listen at loud levels, be careful to listen for the point of audible distortion — if the speakers begin to sound distressed, turn the Volume down or your
speakers and/or amplifi er(s) will be damaged! This type of damage constitutes abuse and is not covered by the warranty. If louder volumes are desired, consider a more powerful amplifi er.

There is Actually a Limit!

Even with these safer, more powerful amplifi ers, there is a point at which you could have more power than the speaker can handle. At that point you will overpower the speaker and damage it. At loud levels do not increase bass/treble controls from zero and ensure that all loudness/contour/bass EQ buttons are off (otherwise rated output power will be reached at even lower volume control settings).

The Right Amount of Power

A power-range rating is given in the specifi cations as a guide to indicate the approximate minimum and maximum power input of your GoldenEar BRX speakers. Amplifi ers that meet or even exceed the speaker’s power-range rating are recommended as their greater power reserves provide better sound. But always use the speakers within their power-range rating to prevent damage — that is, keep listening levels below the point of obvious audible distortion.

Unpacking your BRX Loudspeakers

Please Inspect for Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your GoldenEar Technology Dealer and/or the delivery company that delivered your loudspeaker. Please unpack your system carefully.
Save all cartons and packing materials in case you move or need to ship your system. Record the serial number found on the back of the BRX loudspeaker here:

Please go to http://www.goldenear.com/support/registrationandwarranty and use the serial number(s) above to complete your warranty registration.

Speaker Placement

GoldenEar Technology BRX speakers are designed to allow fl exible placement while providing a very large window of sound throughout your listening room. Please remember that although the following
recommendations are usually valid, all rooms and listening sets-ups are somewhat unique, so do not be afraid to experiment with the speakers. Remember, whatever sounds best to you is correct.

Room Acoustics

GoldenEar Technology BRX speakers are designed to provide exceptional sound in a wide variety of domestic settings. It is important to note however that listening room construction, dimensions and furnishings all play a part in the quality of sound you will ultimately achieve from your new speakers. The listening room will impose its own character on the performance capabilities of the speaker system. Regarding the room, please note that:

• Mid and high frequencies are affected by the amount of soft furnishings in your room — curtains, carpets, sofas, wall coverings, etc. An excess of such items can result in a somewhat dull sound. The same room without any soft furnishings can produce an overall bright sound. The typical quantity of soft furnishings found in most living environments provides the right acoustic characteristics to allow the speakers to sound balanced;
• Concrete fl oors and walls tend to aggravate low-frequency standing wave problems and are less preferred;
• Rooms where height, width and length are similar should be avoided as they can exhibit signifi cant low-frequency standing wave problems. This may result in reduced clarity. If no other room is possible, experiment with speaker placement to minimize acoustic problems.

The extra care you take in correctly positioning the speakers will result in greater listening enjoyment. So, keep the following guidelines in mind when deciding on the best speaker placement.

Positioning BRX as Left/Right Fronts

To ensure the best performance possible, observe the following placement guidelines:
Accurate Timbre: For the most accurate and natural timbre, speakers’ high- frequency drivers should be at approximately ear level.
Balanced Bass: Placing speakers in corners will over-emphasize bass and reduce overall clarity. If possible, position speakers 8 in (20 cm) or more from the wall behind the speaker and as much as possible from either side wall.
This will ensure better bass performance and optimal midrange clarity.
Best Imaging: Measure the distance from your main listening area to the left front speaker (we’ll call this distance “X”). For optimal imaging and largest soundstage, place speakers “X” distance apart from each other (and no less than 3/4 of that distance — 3/4 of “X”). To further optimize imaging, turn speakers inward so they point toward the listening position with their axes crossing just behind it.

Positioning BRX as Surrounds

When used as surround speakers, BRX speakers may be located on the side or behind the listeners. When used on the sides, take care never to locate the speakers forward of the listeners (A). If the speakers are placed along the rear wall as surrounds, it is suggested that they be positioned fairly wide apart if possible. For instance, if there is a couch in the center of the rear wall on which the listeners will sit, try to position the speakers wider apart than the couch (B).

Speaker Break-in

Your new BRX loudspeaker system should sound good right out of the box; however, an extended break-in period of 40-60 hours or more of normal playing time is required to reach full audiophile performance capability. Break-in allows the driver suspensions to work-in and crossover components to “heal,” resulting in fuller and tighter bass, a more open “blossoming” midrange and smoother high frequency reproduction.

Speaker Connection

Turn your amplifi er/receiver OFF before performing any connection steps, in order to prevent accidental damage to your amplifi er.
Your BRX speakers are equipped with a set of 5-way binding posts that can be used with bare wire, pin or spade connectors or banana plugs. Tighten the posts fi rmly by hand, but do not over tighten them. Make sure all wires are fi rmly fastened. Always use high quality speaker wire of suffi cient gauge for the distances you are running (see your dealer for assistance).

For the front BRX speakers, hook up the left main/front channel red(+) terminal of your receiver or amplifi er to the red(+) terminal of your left loudspeaker and the left main/front channel black(-) terminal of your receiver or amplifi er to the black(-) terminal of your left loudspeaker. Connect the right channel main/front channel red(+) terminal of your amplifi er or receiver to the red(+) terminal of your right loudspeaker and the black(-) terminal of the right main/front channel of your receiver or amplifi er to the black(-) terminal of your right loudspeaker. It is essential that both speakers be connected in the same way (in phase) to its own channel of the amplifi er. If you experience a great lack of bass, it is likely that one speaker is out of phase (+ and – reversed) with the other.
If you are using the BRX speaker as surround speakers, hook up the left surround red(+) terminal of your receiver or amplifi er to the red(+) terminal of your left surround speaker and the left surround black(-) terminal of your receiver or amplifi er to the black(-) terminal of your left surround speaker. Connect the right surround red(+) terminal of your amplifi er or receiver to the red(+) terminal of your right surround loudspeaker and the black(-) terminal of the right surround channel of your receiver or amplifi er to the black(-) terminal of your right surround loudspeaker. Again, it is essential that both speakers be connected in the same way (in phase) to its own channel of the amplifi er.

Troubleshooting

If you experience any diffi culties with your BRX speakers, try the suggestions described below. If you are still having problems, please consult your GoldenEar Technology Authorized Dealer for assistance.

1. Make sure all your system interconnects and power cords are solidly in place.
2. Check that no foreign objects or liquid has entered the speaker.
3. If no sound comes out or the sound is distorted in some way and you are sure the system is set up properly, please bring the speaker to your GoldenEar Technology Authorized Dealer for assistance.
   But make sure you Call First.

Service

Service and warranty work on your GoldenEar loudspeakers will normally be performed by your local GoldenEar
Technology dealer. If, however, you wish to return the speaker to us, please contact us fi rst, describing the problem and requesting authorization as well as the location of the nearest factory service center.
Please note that the address given in this booklet is the address of our offi ce P.O. Box only. Under no circumstances should products or parts be shipped to our offi ces or returned without contacting us fi rst and obtaining return authorization.

Technical assistance

It is our pleasure to offer assistance if you have any questions regarding your BRX speakers or their set-up. Please contact your nearest GoldenEar Technology dealer or contact us directly at 410-998-9134.

Recycling and Reuse Guidelines for Europe

In accordance with the European Union WEEE (Waste Electrical and Electronic Equipment) directive effective August 13, 2005, we would like to notify you that this product may contain regulated materials which, upon disposal, according to the WEEE directive, require special reuse and recycling processing. For this reason GoldenEar Technology (manufacturers of GoldenEar
Technology speakers) has arranged with our distributors in European Union member nations to collect and recycle this product at no cost to you. To fi nd your local distributor please contact the dealer from whom you purchased this product or go to our website at www.goldenear.com.

Please note that the product only falls under the WEEE directive. When disposing of packaging and other shipping material we encourage you to recycle through the normal channels

Specifications

BRX

Dimensions: 8-1/16″ (20.5 cm) W x 12-1/4″ (31.1 cm) D x 12-1/8″ (30.8 cm) H
(includes feet)
Weight: 12 lbs. (5.44 kg)
Frequency Response: 40 Hz – 35 kHz
Effi ciency: 90 dB
Nominal Impedance: Compatible with 8 ohms
Driver Complement: One High-Gauss Neodymium High-Velocity Folded Ribbon (HVFR)
Reference Tweeter
One 6″ high-defi nition cast-basket mid/bass Reference Driver
Two 6.5″ side-mounted planar low-frequency radiators
Rec. Amplication: 20 – 250 Watt/channel
Specifi cations are subject to change without notice.

Limited Warranty

5-YEARS FOR DRIVERS AND CABINETS,
3-YEARS FOR ELECTRONIC COMPONENTS

GoldenEar Technology warrants to the original retail purchaser only that this GoldenEar Technology Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years covering the drivers and

cabinets, and three (3) years for the electronic components from the date of the original purchase from a GoldenEar Technology Authorized Dealer. However, this warranty will automatically terminate prior to the expiration of five (5) years for the drivers and cabinets and three (3) years for the electronic components if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall hereinafter be referred to as “you.” Defective Products must be shipped, together with proof of date of purchase, prepaid insured to the Authorized Dealer from whom you purchased the Product, or to the nearest factory service center. Product(s) must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If, upon examination at the Factory or a GoldenEar Technology Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, GoldenEar Technology or the GoldenEar Technology Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Product(s) become the property of GoldenEar Technology. Product(s) replaced or repaired under this Warranty will be returned to you, within a reasonable time, freight collect.

This Warranty does not include service or parts to repair damage caused by accident, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defects in materials or workmanship, or service, or repair or modification of the Product which has not been authorized by GoldenEar Technology. GoldenEar Technology makes no Warranty with respect to its

Products purchased from dealers or outlets other than GoldenEar Technology Authorized Dealers. This Warranty is in lieu of all other expressed Warranties. If this Product is defective in material or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will GoldenEar Technology be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if GoldenEar Technology or a GoldenEar Technology Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party.

Some states do not allow the exclusion or limitation of consequential damages, so the above limitation may not apply to you.
All implied warranties on the Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.

This product complies with the essential requirements of the EMC directive 89/336/EEC

Visit us at www.goldenear.com

Copyright © 2019 GoldenEar Technology. All rights reserved.
Reproduction in whole or in part without our express permission is prohibited.

Read More About This Manual & Download PDF:

References

• Home | GoldenEar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>