ciarra CBCB6736F 60cm Glass Angled Cooker Hood Instruction Manual
- June 17, 2024
- CIARRA
Table of Contents
ciarra CBCB6736F 60cm Glass Angled Cooker Hood
Specifications
- Model Numbers: CBCB6736F, CBCB6736H, CBCB9736F, CBCB9736H
- Website : www.ciarraappliances.com
Product Information
The cooker hood is designed to provide ventilation and remove odours from your kitchen while cooking. It features different speed settings, filters for grease and carbon, and LED lighting for better visibility.
Installation Instructions
Before Using the Cooker Hood
Make sure to read the instruction manual carefully before starting the installation process. Ensure all parts are included in the package.
Prepare for Installation
Check that you have all the necessary tools for installation, such as a screwdriver, drill, and measuring tape. Identify the location where the cooker hood will be installed.
Installation
Follow the step-by-step instructions provided in the manual to install the cooker hood correctly. Make sure to secure it properly to the wall or ceiling.
Carbon Filter Installation
If your model requires a carbon filter, follow the specific instructions provided in the manual to install it correctly for optimal performance.
Product Usage Instructions
Operation
Once the cooker hood is installed, familiarize yourself with the different speed settings and lighting options. Adjust the settings according to your cooking needs.
Cleaning and Maintenance
Regularly clean the grease filter, carbon filter (if applicable), and the exterior of the cooker hood to ensure proper functioning. Follow the cleaning instructions provided in the manual.
Troubleshooting
If you encounter any issues with the cooker hood, refer to the troubleshooting section of the manual for guidance on common problems and solutions.
FAQ
- Q: How often should I clean the grease filter?
- A: It is recommended to clean the grease filter at least once a month to prevent grease buildup and maintain efficient ventilation.
- Q : Can I replace the LED lights myself?
- A: Yes, you can replace the LED lights following the instructions provided in the manual. Ensure to use compatible replacement bulbs.
- Q: What should I do if the cooker hood is making unusual noises?
- A: Check if any parts are loose or obstructed. If the issue persists, contact customer support for further assistance.
Safety
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
- Us this unite i othe we questions de oct manufacturer. If you have questions, contact the manufacturer at the address or telephone number listed in the warranty.
- the reserving or denying unit, unplug or disconnect the cooker hood from the power supply.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
- Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting.
- When cutting or drilling into a wall or ceiling, do not damage electrical wiring and other hidden utilities.
- Ducted fans must always be vented to the outdoors.
- Ensure the requirements of the local authorities are adhered to concerning the discharge of exhaust air.
- This unit must be grounded.
- When applicable local regulations comprise more restrictive installation and/or certification requirements, the aforementioned requirements prevail on those of this document and the installer agrees to conform to these at his own expense.
- Clean cooker hood frequently. Grease should not be allowed to accumulate on fans, filters or in exhaust ducts.
- warming; Failure to instal the screws or framing device in accordance with these instructions may result in electrical hazards.
WARNING
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING
- SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS. IF THE FLAMES DO NOT GO OUT IMMEDIATELY, EVACUATE AND CALL THE FIRE DEPARTMENT.
- NEVER PICK UP A FLAMING PAN – You may be burned.
- DO NOT USE WATER, including wet dishcloths or towels – This could cause a violent steam explosion.
- Use an extinguisher ONLY if:
- You own a Class ABC extinguisher and you know how to operate it.
- The fire is small and contained in the area where it started.
- The fire department has been called.
- You can fight the fire with your back to an exit.
CAUTION
- For indoor use only.
- For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapours.
- To avoid motor bearing damage and noisy and/or unbalanced fan blades, keep drywall spray, construction dust, etc. off the cooker hood.
- Your hood motor has a thermal overload which will automatically shut off the motor if it becomes overheated. The motor will restart when it cools down. If the motor continues to shut off and restart, have the hood serviced.
- Always follow the cooking equipment manufacturer’s requirements regarding ventilation needs.
- To reduce the risk of fire and to properly exhaust air, be sure to duct air outside – Do not exhaust air into spaces within walls or ceilings or into attics, crawl spaces or garages.
- When installing, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
- Please read the specification label on the product for further information and requirements.
Specifications
Before Using the Cooker Hood
CAUTION: Before proceeding to the installation, check if items are missing or damaged, and contact the manufacturer. Observe all governing codes and ordinances. Have a qualified technician install the cooker hood. It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The manufacturer declines all responsibility for improper installation and does not accept responsibility for appliance warranty in the event of damage caused by incorrect installation.
COMPONENTS:
YOU WILL NEED THESE TOOLS FOR THE INSTALLATION
Prepare for Installation
Prepare for Installation:
-
Ventilation Mode
Recirculation Mode: Recirculating with a carbon filter (required), the smells and odours can be filtered and vented through the top vented hole and the exhaust pipe is not required. Extraction Mode: You can install the 1.5m long and 150mm diameter aluminium exhaust pipe for extracting, which is included in the installation kit. -
When possible, use at least 60cm straight runs before any turns. Larger ductwork may be required for best performance with longer duct runs.
-
Before installation, don’t connect the power.
Installation
Install the Hood (Extraction) :
-
Remove all protective poly film from the hood and/or parts.
-
Recommend installation height: 65~75cm above the cooktop for best extraction.
- Required height over gas hob: 750mm;
- Required height over electric hoh. 650mm
-
First, use a pencil to mark the installation position on the wall, then use a Measuring Tape to measure the height from the stove surface to the hood (the centre point of aluminium grease filter) and use a Spirit Level Ruler to maintain the level, then use a pencil to draw ahorizontal line along the level.
-
Poke the 7 perforated positions on the 1:1 Installation Diagram, then align with the centre point of the aluminium grease filter on the Installation Diagram with the horizontal line on the wall, then tape the Installation Diagram to the wall, and use a pencil to mark the nerforated positions on the wall in the corresponding nositions
-
Determine the maximum chimney installation height according to the actual scenario and mark the chimney installation locations along the centre line of the Installation Diagram.
-
Remed he Gallatin a firestick i the holes tin, have men the Wall Plug into the wall.
-
Use three 4*30mm Screws to fasten the Wall Bracket on the wall.
-
Remove the aluminium grease filter and hang the hood on the corresponding hook of the Wall Bracket,
-
Use a Spirit Level Ruler to measure whether the hood is at a horizontal level, and use two 4*30mm Screws to lock into the safety hole position of the hood (not mandatory, according to the user’s wishes to choose whether to lock).
-
Tear off the tape from the air outlet.
- NOTE: Make sure you remove the tape on the damper and check if the damper opens and closes freely, otherwise, it makes noises, and the cooker hood will shake
-
Install the Aluminum Exhaust Pipe into the air outlet and lock it with a Cable Tie; the other end of the Aluminum Exhaust Pipe will be pulled upward to outdoors and locked with a Cable Tie (Note: This step can be ignored if use as recirculation mode with carbon filter).
-
Use two 4*8mm Screws to fasten the Lower Chimney Bracket on the Lower Chimney.
-
Insert the Lower Chimney into the hood and fix it to the corresponding positioning hole with two 4*8mm Screws. (Note: The power cord needs to go through the chimney and connect the power).
-
Use two 4*30mm Screws to lock the Lower Chimney Bracket into the corresponding positioning holes on the wall.
-
Use two 4*30mm Screws to lock the Upper Chimney Bracket to the corresponding positioning holes on the wall.
-
Put the Upper Chimney into the Lower Chimney, and then pull to the height of the Upper Chimney Bracket.
-
Use two 4*8mm Screws to assemble the Upper Chimney on the Upper Chimney Bracket.
-
Turn the LED lights on/off, and test whether the functions are working properly.
Carbon Filter Installation (Recirculation) :
-
Carbon filters can be used to trap odours. In order to install the carbon filter, the grease filter should be detached first. Press the lock and pull it. down.
-
Place the carbon filter into the unit and turn it in the clockwise direction to lock it in place.
-
If the carbon filter needs to be replaced, please turn it in the anti-clockwise direction.
NOTE- Make sure the carbon filter is securely locked.
- When the carbon filter is installed, the suction of the cooker hood will be reduced.
- The carbon filter should be changed every 2-4 months depending on the conditions of use.
Operation
A way to twin the kitch on before you begin cooking to establish an
The electronic button operates the hood as follows:
STANDBY MODE
After plug in, When the buzzer makes a sound and all the indicator lights will be turned on for 1S then go out, the cooker hood will enter the standby mode. The (1) button indicator light continues to flash regularly. If there is no operation for 60s, the hood will go into sleep mode; If you need to operate, press any button briefly to start up the cooker hood. When your cooker hood is in standby mode; you can easily switch on the 1.2.3 speed level by pressing the corresponding speed level you want for 2 seconds, press the corresponding speed level button again, the cooker hood will go back to standby mode.
-
Low-Speed button
For air ventilation with barely no noise; or simmering with very little smoke and steam. -
Medium Speed button
For your everyday cooking purpose. -
High-Speed button
High-speed for stir-fry or cooking with lots of smoke and grease produced. -
Booster button
Instant access to maximum suction power, jump to 3 speed after 10 minutes. -
Light button
Press once, to turn on the LED light in level 1, Press for the second time, turn on the LED light in level 2, increase brightness; Press for the third time to turn offthe l EN light
Smart Life APP
Download and Installation of Smart Life APP
- You must use an Android phone or an iPhone to download and use this APP.
- Search “Smart Life” in the Google Play store for Android or IOS App Store to download and install the APP.
Cooker Hood and Smart Life APP pairing
- When you log in to Smart Life APP for the first time, you need to create a new account. When creating a new account, follow the app’s instructions to register.
- If you already have an account, you can use the existing account to log in.
- After logging in, follow the steps below to connect the cooker hood (the operating procedures of Android and IOS systems are the same)
About the operation interface:
-
ON/Off Button
-
Light Button
When lights are OFF, press once to turn ON the lights. Press -
this button again to turn OFF the lights.
Fan Speed Button
You can control the corresponding gears of 1-2-3-P on the cooker hood
Quick Delay Setting
When the cooker hood is working, you can set the delay timer through the delay function. Push this button, the cooker hood will stop working in 5 minutes.
Cleaning and Maintenance
Proper maintenance of the Cooker Hood will ensure proper performance of the unit. Before cleaning the unit, unplug or disconnect the cooker hood from the power supply.
GREASE FILTERS
The grease filters should be cleaned frequently. Can be cleaned in a dishwasher under high temperature without using any detergent.
CARBON FILTER
The carbon filter should be changed every 2-4 months depending on the conditions of use. Replace more often if your cooking style generates lots of grease, such as stir-frying. These filters are not washable and cannot be reused. Refer to installation instructions included with a carbon filter.
STAINLESS STEEL CLEANING
Do:
- Regularly clean it with a cloth or rag soaked with warm water and mild soap or liquid dish detergent.
- You may also use a specialized household stainless steel cleaner.
Don’t:
- Use any steel or stainless-steel wool or any other scrapers to remove stubborn dirt.
- Use any harsh or abrasive cleansers.
- Let plaster dust or any other construction residue reach the hood.
- During construction/ renovation, cover the cooker hood to make sure no dust sticks to the stainless-steel surface.
Avoid when choosing a detergent:
- Any cleaners that contain bleach will attack stainless steel.
- Any products containing: chloride, fluoride, iodide, or bromide will deteriorate surfaces rapidly. Any combustible products used for cleaning such as acetone, alcohol, ether, benzol, etc., are highly explosive and should never be used close to a range.
PAINTED FINISH CLEANING:
Clean with warm water and mild detergent only. If discolouration occurs, use a finish polish such as automotive polish. (DO NOT use a rough abrasive cleaner or porcelain cleaner.)
LED REPLACEMENT
- Rectangle LED lamp:
CAUTION:
Before cleaning or repairing and replacing accessories, please make sure to shut down the power before operation, so as to avoid electric shock, damage to the human body and even endanger life safety!
- Turn off the hood and unplug the power outlet. Detach the grease filter in order for you to replace the LED lamp.
- Push the LED lamp holder out from the cabinet by hand, or use a screwdriver to pin up the LED lamp around the edges, pull out slotted the LED lamp and the wire together.
- Open the power protection cover, pull out the plug and replace the corresponding model of the LED lamp.
- Turn the power on and test all blower and light functions to ensure they are operating properly. Insert the new LED light gently into the light socket, please make sure you aim at the grooves on the lighting panel when installing. Push the | FD light in until it is flushed with the light panel.
- Put the grease filter back on, you are good to go.
LED REPLACEMENT
- Rectangle LED lamp:
CAUTION:
Before cleaning repairing and replacing accessories, please make sure to shut
down the power before operation, so as to avoid electric shock, damage to the
human body and even endanger life safety!
- Turn off the hood and unplug the power outlet. Detach the grease filter in order for you to replace the LED lamp
- Push the LED lamp holder out from the cabinet by hand, or use a screwdriver to pin up the LED lamp around the edges, and pull out the LED lamp and the wire together.
- Open the power protection cover, pull out the plug and replace the corresponding model of the LED lamp.
- Turn the power on and test all blower and light functions to ensure they are operating properly. Insert the new LED light gently into the light socket, please make sure you aim at the grooves on the lighting panel when installing. Push the LED light in until it is flushed with the light panel.
- Put the grease filter back on, you are good to go.
Troubleshooting
If problem persists after the above checks, please contact CIARRA Customer Care Centre for assistance.
Environmental Protection
Waste electrical products should not be disposed with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
More Information
Dear customer:
Thank you so much for your purchase, please read this instruction manual
carefully before installation & use. If you have any question, please contact
us at:
Scan this QR code to get a multilingual manual:
Scan this QR code for the installation video:
Documents / Resources
|
ciarra CBCB6736F 60cm Glass Angled Cooker
Hood
[pdf] Instruction Manual
736F, 736H, CBCB6736F, CBCB6736F 60cm Glass Angled Cooker Hood, 60cm Glass
Angled Cooker Hood, Glass Angled Cooker Hood, Angled Cooker Hood, Cooker Hood,
Hood
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>