WIWU QM002 I-Dislay Status Bar Magnetic Keyboard Case Instruction Manual

June 17, 2024
WIWU

WIWU QM002 I-Display Status Bar Magnetic Keyboard Case

WIWU-QM002-I-Display-Status-Bar-Magnetic-Keyboard-ase-
PRODUCT

Specifications:

  • Bluetooth connectivity
  • Backlight feature
  • Automatic reconnection
  • Standby mode
  • Charging indicator
  • Low power alert

Product Usage Instructions:

Bluetooth Pairing:

To pair the keyboard with a device, press the + button to enter pairing mode. The indicator light will flash to indicate pairing mode. If no connection is established within 5 minutes, the pairing mode will deactivate.

Auto Reconnect

When you open the floating cantilever keyboard, it will automatically attempt to reconnect with the last paired device for 5 seconds.

During Charging

While the keyboard is charging, the indicator light will flash slowly.

Low Power Alert

It is recommended to charge the keyboard when the power level falls below 30%.

Standby Mode

The keyboard backlight will turn off after 1 minute of inactivity. After 10 minutes of inactivity, the keyboard will enter standby mode. Press any key to wake the keyboard.

Backlight Caps Lock

To turn the backlight on/off and adjust the brightness level (low, medium, high), press the + button. When Caps Lock is turned on, the indicator lights up.

FAQ:

Troubleshooting Guide:

If the keyboard stops working:

  1. Ensure the keyboard is switched on.
  2. If the battery is low, charge the keyboard.
  3. If the connection is unstable, wait for 10 seconds after opening the lid.

If the problem persists, unpair the keyboard and follow Bluetooth pairing instructions. For further assistance, contact customer service at wiwu.com.

Reminder:

This keyboard case automatically activates when opened and enters sleep mode when closed for maximum convenience in daily use.

Using Your Keyboard

WIWU-QM002 I-Dislay-Status-Bar-Magnetic-Keyboard-Case-
fig-7

  • Bluetooth Pairing
    Press + to enter pairing mode. will flash to indicate that the keyboard has entered pairing mode. If there is no connection established within 5 minutes, the pairing mode will automatically deactivate.

  • Auto Reconnect
    When opening the floating cantilever keyboard it will automatically attempt to reconnect with the last paired device for 5 seconds.

  • During Charging
    When the keyboard is charging , the Indicator light flashing slowly flashing slowly.

  • Low Power
    It is recommended to charge the keyboard when the power level falls below 30%.

  • Standby Mode
    The keyboard backlight will turn off automatically after 1minute of inactivity. After 10 minutes of inactivity, the keyboard will enter standby mode. Press any key to wake the keyboard

  • Backlight
    Press + to turn the backlight on/off and adjust the brightness level (low, medium, high).

  • Caps Lock
    When Caps Lock is turned on, lights up.

Troubleshooting Guide

If the keyboard stops working, please check the following:

  1. Ensure the keyboard is switched on.
  2. If the keyboard is out of battery, charge the keyboard.
  3. If the connection is unstable, open the lid and wait for 10 seconds before opening. If the problem persists, unpair the keyboard by going to Settings > Bluetooth > Device List > “ WiwU Keyboard ™ and tap, then choose “Forget This Device”. Follow the Bluetooth pairing instructions to reconnect your keyboard. If the keyboard remains unresponsive, please repeat the previously mentioned steps. If you are still experiencing problems, feel free to contact our customer service at wiu.com

Reminder

activates gen the hid an open a and cores dee a mind the pre I led, eng coats maximum convenience for Daily use.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC RF radiation exposurelimitsset forth for an uncontrolled environment. This equipment should
be installed and operated with a minimum distance of 20 cm between the radiator and your body.

CONTACT

  • Manufacturer: SHENZHEN CITY KEXIN HUACHENG COMMUNICATION TECHNOLOGY CO., LTD
  • Address: 1st Floor, Kenuo Building, No. 7 Kelian Road, Guangming District, SHENZHEN, 518153

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals