WIWU COMBO iPad Keyboard Case User Manual

WIWU COMBO iPad Keyboard Case

OVERVIEW

INSTALLATION INSTRUCTION

Note : Please read the manual carefully before using

Keyboard Case Size

How to connect the iPad

1. Open the cover, install the iPad into the cover, then fold the leather case inwards into a triangle to support the iPad.
2. Slide the key to “ON” to turn on the keyboard power. (the power indicator will flash slowly)
3. Press “Fn+ del” button into Bluetooth matching condition, the Bluetooth indicator light will flash with Blue.
4. Open Bluetooth on your iPad. Search keyboard name (WiWU 5.2G Keyboard) for matching device to keyboard.
5. The connection is successful, the Bluetooth indicator stop flashing.

Note:

• The keyboard will automatically go into power savings mode after 10 minutes of inactivity.
• Press any key and wait 2-3 seconds to wake the keyboard
• The keyboard is not waterproof, so if liquid (such as water) leaks, the
• the keyboard will be damaged and will not work properly.

Shortcut Keys

No Backlight Keyboard

Specifications

Backlight Keyboard

How to change the backlight color

• Adjust the brightness three-level adjustable.
• Switch color ****

Trackpad/ Indicator Overview

Turn on/off the touchpad function

Use the key combination to turn off/on the touchpad to avoid extra operations due to the touchpad.

Indicator Light

IOS: Trackpad Gestures

Note: Please upgrade iPad to the latest IOS system (13.4.1 and above is the best)

Attention

• When not used for a long time, suggest closing the keyboard, in order to prolong battery lift.
• In order to get a longer battery lift, charging before the keyboard power light flashes, the charging time must be better than 2 hours.

Charging

• when the battery Is Iow, the power indicator bilinking, means need to charge the keyboard. Please use the iPad charging cable to charge the keyboard.
• When charging, charge indicator lights will blinking, after full lights automatically turnd oft.

Installation and Removal

1. Removing back protective piece: hold iPad on both sides and use thumbs to gently push off the back cover (see photo.) Cover is held in place by two tabs.
2. Proceed to “peel” cover away from iPad.
3. Take iPad out.
4. Take iPad out upwards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>