WiWU MTIKC10.9/11B Mag Touch iPad Keyboard Case User Manual
- June 16, 2024
- WIWU
Table of Contents
WiWU MTIKC10.9/11B Mag Touch iPad Keyboard Case
Keyboard Case Size
404.49*252.451
How to connect the iPad
- Open the cover, install the iPad into the cover, and then fold the leather case inwards into a triangle to support the iPad.
- Slide the key to “ON” to turn on the keyboard power. (the power indicator will flash slowly)
- Press the “Fn+ del” button into Bluetooth matching condition, the Bluetooth indicator light will flash with Blue.
- Open Bluetooth on your iPad. Search the keyboard name (Mag Touch Keyboard) to match the device to the keyboard.
- The connection is successful, the Bluetooth indicator stops flashing.
Note
- The keyboard will automatically go into power savings mode after 10 minutes of inactivity. Press any key and wait 2-3 seconds to wake the keyboard.
- The keyboard is not waterproof, so if liquid (such as water) leaks, the keyboard will be damaged and will not work properly.
Shortcut Keys
No Backlight Keyboard
Specifications
Backlight Keyboard
How to change the backlight colour
Adjust the brightness three-level adjustable.
Switch color 
Trackpad / Indicator Overview
Turn on/off touchpad function
Use the key combination to turn off/on the touchpad to avoid extra
operations due to the touchpad.
Indicator Light
IOS: Trackpad Gestures
Note: Please upgrade the iPad to the latest IOS system (13.4.1 and above
is the best)
Attention
When not used for a long time, suggest closing the keyboard, to prolong
battery lift. To get a longer battery lift, charging before the keyboard power
light flashes, the charging time must be better than 2 hours.
Charging
When the battery is low, the power indicator blinks, which means need to
charge the keyboard. Please use the iPad charging cable to charge the
keyboard. When charging, charge indicator lights will blink, and after full
lights automatically turn off.
Installation and Removal
- Removing back protective piece: hold the iPad on both sides and use your thumbs to gently push off the back cover (see photo.) The cover is held in place by two tabs
- Proceed to “peel” the cover away from the iPad.
- Take the iPad out.
- Take the iPad out upwards.
